Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 200-543-5
CAS number: 62-56-6
4.1 Description of first aid measuresGeneral advice:Seek medical advice in case of symptoms caused by eye or skin contact, inhalation or swallowing.If inhaled:See that there is fresh air.In case of discomfort or massive exposure:Consult a physician.In case of skin contact:Wash off with plenty of water and soap.Remove contaminated or saturated clothing.In case of eye contact:Rinse thoroughly with plenty of water, also under the eyelids.If swallowed:Rinse mouth.Drink 1 or 2 glasses of water.Do not induce vomiting without medical advice.4.2 Most important symptoms and effects, both acute and delayedSymptoms:IrritationStomach/intestinal disorders4.3 Indication of any immediate medical attention and special treatment neededTreatment:Induce vomiting, but only if victim is fully conscious.
5.1 Extinguishing mediaSuitable extinguishing media:Water spray, foam, CO2, dry powder.Unsuitable extinguishing media:high volume water jet5.2 Special hazards arising from the substance or mixtureHazardous combustion products:Carbon oxidesSulphur oxidesnitrous gases5.3 Advice for firefightersSpecial protective equipment for firefighters:In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.Further information:Cool containers/tanks with water spray.
6.1 Personal precautions, protective equipment and emergency proceduresPersonal precautions:Wear personal protective equipment; see section 8.Ensure adequate ventilation.Avoid dust formation.6.2 Environmental precautionsEnvironmental precautions:Product or extinguishing water with product must not be al-lowed to enter soil, sewers or natural bodies of water.6.3 Methods and material for containment and cleaning upMethods for cleaning up:Ventilate room thoroughlyRemove all sources of ignition.Use mechanical handling equipment.Avoid dust formation.Keep in suitable, closed containers for disposal.6.4 Reference to other sectionsFor disposal considerations see section 13.
7.1 Precautions for safe handlingAdvice on safe handling:Provide sufficient ventilation and exhaust at the workplace.Avoid dust formation.Do not allow accumulation of dust.Do not allow individual / bulk containers to stand openAdvice on protection against fire and explosion:If dusts develop, explosive dust/air mixtures may form. Keep away from heat and sources of ignition. Take precautionary measures against static discharges.Hygiene measures:Do not breathe dust or spray mist. Avoid contact with skin, eyes and clothing. Take off clothing and shoes contaminated with product. Clean before reuse. Do not eat, drink or smoke while working. Wash hands, and/or face before breaks and when workday is finished. Keep away from food, drink and animal feedingstuffs.Dust explosion class:St17.2 Conditions for safe storage, including any incompatibilitiesRequirements for storage areas and containers:Keep tightly closed in a dry and cool place. Store under lock and key or in a way that only skilled persons have access to it.Further information on storage conditions:Protect against light.Packaging material:Suitable material: polyethylene7.3 Specific end use(s)Specific use(s):For more details see annexes Exposure scenario.
8.1 Control parametersDNEL derivationIndustrial use: Inhalation long term systemic 1 mg/m³Industrial use: dermal long term systemic 3.4 mg/kg bw*dayConsumer use: Inhalation long term systemic 0.2 mg/m³Consumer use: dermal long term systemic 1.7 mg/kg bw*day
PNEC derivationFreshwater: 0.01 mg/m³Freshwater sediment: 0.072 mg/kg dwMarine water: 0.001 mg/m³Marine water sediment: 0.0072 mg/kg dwsewage plant: 0.38 mg/lSoil: 2.725 mg/kg dw
8.2 Exposure controlsEngineering measuresControl of environmental exposure: see exposure scenarioPersonal protective equipmentEye protection:Safety glassesHand protectionMaterial:Nitrile rubber, Recommendation: Dermatril 740Break through time:> 480 minGlove thickness:0,11 mmMaterial:Nitrile rubber, Recommendation: Camatril 730Break through time:> 480 minGlove thickness:0,4 mmSkin and body protection:Protective clothingIf intensive contact with the hazardous material cannot be avoided with certainty, order (depending on the hazard involved) additional protective measures for example chemical protective suit.Respiratory protection:Use suitable respiratory protection in the presence of dust.Dust protection mask in accordance with EN 149 FFP2
10.1 ReactivitySee section 10.310.2 Chemical stabilityNo decomposition if stored and applied as directed.10.3 Possibility of hazardous reactionsHazardous reactions:Vigorous reaction on contact with oxidizing agent.10.4 Conditions to avoidConditions to avoid:> 140 °CAvoid dust formation.Keep away from heat and sources of ignition.10.5 Incompatible materialsMaterials to avoid:Strong oxidizing agentsStrong acidsStrong basesHydrogen peroxideNitric acid10.6 Hazardous decomposition productsHazardous decomposition products formed under fire conditions. see section 5
13.1 Waste treatment methodsProduct:Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.Contaminated packaging:Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again