In Vitro Diagnostic Medical Devices Directive
EU. Hazardous Substances for Purposes of Art. 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices
Directive shall apply to in vitro diagnostic medical devices and their accessories. For the purposes of this directive the following definitions apply: 'medical device' means any instrument, apparatus, appliance, material or other article, whether used alone or in combination, including the software necessary for its proper application, intended by the manufacturer to be used for human beings for the purposes as defined in Art. 2 (a). 'in vitro diagnostic medical device' means any medical device which is a reagent, reagent product, calibrator, control material, kit, instrument, apparatus, equipment, or system, whether used along or in combination as defined in Art. 2 (b). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.
This directive shall not apply to devices manufactured and used only within the same health institution and on the premises of their manufacture or used on premises in the intermediate vicinity without having been transferred to another legal entity. (Art. 1 (5)).
Conformity assessment procedures (Art. 9): For all devices other than those covered by Annex II and devices for performance evaluation, the manufacturer shall, in order to affix the CE marking, follow the procedure referred to in Annex III and draw up the EC declaration of conformity required before placing the devices on the market. Registration of manufacturers and devices (Art. 10): Any manufacturer who places devices on the market under his own name shall notify the competent authorities of the MS in which he has his registered place of business. The notification will also include any new devices.
Relevant product types
Yes Directive 93/42/EEC Directive 90/385/EEC Directive 98/34/EC Directive 67/548/EEC Directive 88/379/EEC
Obligations based on CLP hazard class
Yes Annex I - essential requirements, point 8.3.: In case of devices containing or a preparation which may be considered as being dangerous, relevant danger symbols and labelling requirements shall apply.
Obligations based on properties of concerns
EU-level occupational exposure limits
EU-level emission limit values
Substance-centric data source(s) at the EU level
Industry submission system in place
Not specified According to the Directive, regulatory data submitted by manufacturers shall be stored in the European databank accessible by MS Competent authorities. Data shall be forwarded in a standardised format.
Format for industry submission
Corrigendum, OJ L 022, 29.1.1999, p. 75(1998/79) Corrigendum, OJ L 006, 10.1.2002, p. 70(1998/79) Regulation (EC) No 1882/2003 of the European Parliament and of the Council of 29 September 2003 Regulation (EC) No 596/2009 of the European Parliament and of the Council of 18 June 2009 Commission Directive 2011/100/EU Text with EEA relevance of 20 December 2011
Active Implantable Medical Devices Directive
Aerosol Dispensers Directive
Civil Explosives Directive
Construction Products Regulation
Cosmetic Products Regulation
EU Ecolabel Regulation
General Product Safety Directive
Medical Devices Directive
Pressure Equipment Directive
Toy Safety Directive