Substance Information

Substance Infocard

IC

Copper and its compounds

EC / List no.: -

CAS no.: -

Mol. Formula:

Help Help

Key datasets

HELP HELP

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

Region Legislation Emission medium Process/equipment Maximum emissions Average emissions Notes
Maximum limit Maximum sampling duration Average limit Average sampling duration
European Union Industrial Emissions Directive Waste water from the cleaning of waste gases Waste incineration plants and waste co-incineration plants 0.5 mg/l
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 0.5 mg/nm3 8.0 hour These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% for solid fuels and 3% for liquid fuels For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Waste incineration plants 0.5 mg/nm3 8.0 hour All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Cement kilns co-incinerating waste 0.5 mg/nm3 8.0 hour These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All values are standardised at 10 % oxygen All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Atmospheric Pollutants Emission Reductions Directive
  • Atmospheric Pollutants Directive, Annex I - Annual Emission Reporting
    EU. Air. Annual Emission Reporting Requirements: Annex I, Table A-D, Directive 2016/2284/EU, 17 December 2016

    This list contains the Annex I pollutants that European Union Member States (MS) must measure and report on as part of their national emission reporting requirements. Table A lists the required annual reporting requirements; Table B lists the optional annual reporting requirements; Table C lists required two- and four-year reporting requirements. The National Emission Ceilings Directive 2016/2284/EU establishes emission reduction commitments for all EU MS.

Industrial Emissions Directive
  • IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants
    EU. Emission Limit Values: Annexes V (combustion plants), VI (waste incineration/co-incineration plants), VIII (TiO2 installations), Dir. 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010

    This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

Pesticide Residues Regulation
  • Annexes II, III, IV, VII - Defined & Temporary Maximum Residue Levels
    EU. Pesticides. Maximum Residue Levels: Annexes II, III, IV, VII, Regulation 396/2005/EC, last amended by Regulation (EU) 2020/1565, 28 October 2020

    This list contains the maximum residue level (MRLs) entries as listed in the following annexes of Regulation (EC) No 396/2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC: (1) Annex II: Maximum Residue Levels; (2) Annex III: Temporary MRLs; (3) Annex IV: Active Substances for Which No MRLs Are Required; and (4) Annex VII: Active Substance/Product Combinations.

Toy Safety Directive
  • Toy Safety Directive - Substances Restricted in Toys
    EU. Substances Restricted in Toys, Directive 2009/48/EC, OJ L 170/1, 30 June 2009, last amended by Directive 2019/1929/EU, 20 November 2019

    This list contains substances whose use in toys is restricted in the European Union in accordance with points 8 and 13, Part III, and Appendices A and C of Annex II (Particular Safety Requirements) to Directive 2009/48/EC on toy safety. List entries include substance name, CAS number, limit values for certain product types and, where applicable, notes on restrictions.

Help Help

Substance names and other identifiers

Regulatory process names
Copper and its compounds
IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Toy Safety Directive - Substances Restricted in Toys, Other
copper and its compounds
Atmospheric Pollutants Directive, Annex I - Annual Emission Reporting, Toy Safety Directive - Substances Restricted in Toys, Other