Skip to Content
Skip to Content

Substance Information

Substance information

Infocards are automatically generated based on industry data. What is an infocard?

Distillates (petroleum), hydrotreated middle

A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: 265-148-2

CAS no.: 64742-46-7

Mol. formula:

formula
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

GHS08: Serious Health Hazard

Danger! According to the harmonised classification and labelling (CLP00) approved by the European Union, this substance may cause cancer.

Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance may be fatal if swallowed and enters airways, is toxic to aquatic life with long lasting effects, is harmful if inhaled, is a flammable liquid and vapour, may cause damage to organs through prolonged or repeated exposure and causes skin irritation.

Helpful information About this substance

This section provides an overview of the calculated volume at which the substance is manufactured or imported to the European Economic Area (EU28 + Iceland, Liechtenstein and Norway). Additionally, if available, information on the use of the substance and how consumers and workers are likely to be exposed to it can also be displayed here.

The use information is displayed per substance life cycle stage (consumer use, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites or in manufacturing). The information is aggregated from the data coming from REACH substance registrations provided by industry.

For a detailed overview on identified uses and environmental releases, please consult the registered substance factsheet.

Use descriptors are adapted from ECHA guidance to improve readability and may not correspond textually to descriptor codes described in Chapter R.12: Use Descriptor system of ECHA Guidance on information requirements and chemical safety assessment.

The examples provided are generic examples and may not apply to the specific substance you are viewing. A substance may have its use restricted to certain articles or products and therefore not all the examples may apply to the specific substance. Furthermore, some substances can be found in an article, but with unlikely exposure (e.g. inside a watch) or with very low concentrations considered not to pose risks to human health or the environment.

Please note:

For readability purpose, only non-confidential use descriptors occurring in more than 5% of total occurrences are displayed.

The described Product category (i.e. the products in which the substance may be used) may refer to uses as intermediate and under controlled conditions, for which there is no consumer exposure.

More help is available here.

This substance is manufactured and/or imported in the European Economic Area in 1 000 000 - 10 000 000 tonnes per year.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: lubricants and greases, adhesives and sealants, polishes and waxes, anti-freeze products and coating products.
Other release to the environment of this substance is likely to occur from: outdoor use, indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Article service life

Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites, of substances in closed systems with minimal release and manufacturing of the substance.
Other release to the environment of this substance is likely to occur from: outdoor use, indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).
This substance can be found in complex articles, with no release intended: vehicles.
This substance can be found in products with material based on: rubber (e.g. tyres, shoes, toys), leather (e.g. gloves, shoes, purses, furniture), metal (e.g. cutlery, pots, toys, jewellery) and plastic (e.g. food packaging and storage, toys, mobile phones).

Widespread uses by professional workers

This substance is used in the following products: lubricants and greases, coating products, laboratory chemicals, metal working fluids and water treatment chemicals.
This substance is used in the following areas: agriculture, forestry and fishing, offshore mining, formulation of mixtures and/or re-packaging and scientific research and development.
This substance is used for the manufacture of: plastic products, rubber products, fabricated metal products, machinery and vehicles, pulp, paper and paper products and metals.
Other release to the environment of this substance is likely to occur from: outdoor use, indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Formulation or re-packing

This substance is used in the following products: lubricants and greases and textile treatment products and dyes.
Release to the environment of this substance can occur from industrial use: formulation of mixtures, formulation in materials, in processing aids at industrial sites, manufacturing of the substance, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, for thermoplastic manufacture, as processing aid and of substances in closed systems with minimal release.

Uses at industrial sites

This substance is used in the following products: lubricants and greases, paper chemicals and dyes, laboratory chemicals and water treatment chemicals.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used in the following areas: formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of: chemicals and rubber products.
Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites, of substances in closed systems with minimal release, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, in the production of articles, as processing aid, for thermoplastic manufacture and manufacturing of the substance.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance, in processing aids at industrial sites, as processing aid, formulation of mixtures, formulation in materials, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, for thermoplastic manufacture and of substances in closed systems with minimal release.

Help Properties of concern

The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.

Properties of concern are calculated at four "levels" of certainty:

  • "Recognised" - meaning that the concern is indicated in an official source; either a Harmonised C&L (CLP Regulation Annex VI) or in the Candidate list of substances of very high concern for authorisation (REACH). Recognised concerns are illustrated with a dark red icon.
  • "Potential" - again comes from official sources only. For (C), (M), and (R) it means that the concern is suspected in a Harmonised C&L (CLP Regulation Annex VI), as Carc. 2, Muta. 2, or Repr. 2. For (PBT) and (ED) Potential means that the concern is under assessment in the PBT or ED assessment list, and the outcome is not "Not PBT" or "Not ED". There are no potential (Ss) or (Sr)s. Potential concerns are illustrated with a light red icon.
  • "Broad agreement" - comes from data submitted by industry to ECHA, and indicates that the data submitted is aligned, with >= 50% of the data submitters providing the same concern. Broad agreement concerns are illustratated with a solid outlined circle icon.
  • "Minority position" - comes from data submitted by industry to ECHA, and indicates that the data submitted is not aligned. > 5% and < 50% of the data submitters have provided the concerns indicated at this "level". Minority position concerns are illustrated with a greyed out circle icon.

The following properties of concern are calculated:

  • Carcinogenic (C) – Recognised carcinogen: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potential carcinogen: comes from a harmonised C&L classifying the substance as a suspected carcinogen Carc.2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is carcinogenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is carcinogenic. More information about carcinogenicity here.
  • Mutagenic (M) – Recognised mutagen: comes from a harmonised C&L classifying the substance as Muta. 1A or 1B and/or an entry in the Candidate list. Potential mutagen: comes from a harmonised C&L classifying the substance as a suspected mutagen Muta. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is mutagenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is mutagenic. More information about mutagenicity here.
  • Toxic to Reproduction (R) – Recognised as toxic to reproduction: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potentially toxic to reproduction: comes from a harmonised C&L classifying the substance as suspected toxic to reproduction Repr. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is toxic to reproduction. Minority position: comes from industry data where a minority of data submitters indicate the substance is toxic to reproduction. More information about reproductive toxicity here.
  • Skin sensitising (Ss) – Recognised skin sensitiser: comes from a harmonised C&L classifying the substance as Skin Sens. 1, 1A, or 1B. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a skin sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is skin sensitising. More information about skin sensitiser here.
  • Respiratory sensitising (Sr) – Recognised respiratory sensitiser: comes from a harmonised C&L classifying the substance as Resp. Sens. 1, 1A, or 1B and/or an entry in the Candidate list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a respiratory sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is a respiratory sensitiser. More information about respiratory sensitiser here.
  • PBT – Recognised Persistent, bioaccumulative and toxic (PBT): comes from an entry in the Candidate list. Potential PBT: is shown for substances under assessment, and comes from an entry in the PBT assessment list, if the outcome is not final and “Not PBT”. Broad agreement: comes from industry data where a majority of data submitters agree the substance is PBT. Minority position: comes from industry data where a minority of data submitters indicate the substance is PBT. More information about persistent, bioaccumulative and toxic substances here.
  • ED – Recognised Endocrine Disruptor (ED): comes from an entry in the Candidate list. Potential ED: is shown for substances under assessment, and comes from an entry in the ED assessment list, if the outcome is not final and “Not ED”. At this time there is no explicit possibility for industry to indicate their opinion on ED status for substances. If and when this possibility exists it is proposed that industry data also be included in the ED property of concern calculation. More information about endocrine disrupting substances here.

The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications.

Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).

  • C

Carcinogenic

Help How to use it safely

This section provides links to the list of precautions (precautionary statements) and to the guidance on safe use, if they have been provided in REACH registration dossiers.

  • Precautionary statements - describe recommended measures to minimise or prevent adverse effects resulting from exposure to a hazardous product or improper storage or handling of a hazardous product.
  • Guidance on safe use - recommendations by substance registrant on the proper use of the substance in various situations. Examples include recommended measures on fire-fighting, transport and recycling and disposal.

Please note: Precautionary measures and guidance on safe use concern the use and handling of the specific substance as such, not of the presence of the substance in other articles or mixtures. The precautionary measures and guidance on safe use are as submitted to ECHA by registrants under the REACH Regulation. Information on precautionary measures and the safe use is submitted by the registrant of a substance and the registrant is solely responsible for its accuracy and completeness.

More help available here.

about INFOCARD - Last updated: 21/08/2019 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

Help Help

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
CLP - Classification, Labelling and Packaging
  • A list of substances for which classification and labelling data have been notified to ECHA by manufacturers or importers.
Previous Legislations
  • Substances listed in the EINECS, ELINCS, or NLP inventories.
Help Help

Substance names and other identifiers

Regulatory process names
[A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205 °C to 400 °C (401 °F to 752 °F).]
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
C&L Inventory
Distillates (petroleum), hydrotreated middle
EC Inventory, C&L Inventory, Pre-Registration process
Gasoil - unspecified
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
C&L Inventory
Paraffin oil
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
Other
Translated names
(Keerulise koostisega süsivesinike segu, mis saadakse raskbensiini katalüütilisel hüdrogeenimisel. Koosneb süsivesinikest, mille süsiniku aatomite arv on valdavalt vahemikus C11 kuni C25, ning on keemistemperatuuriga umbes 205 °C kuni 400 °C.) (et)
C&L Inventory
(Složeni sastav ugljikovodika dobiven obradom naftne frakcije vodikom u prisutnosti katalizatora. Sastoji se od ugljikovodika koji imaju broj ugljikovih atoma pretežito u području od C11 do C25 i vriju u području približno od 205 °C do 400 °C.) (hr)
C&L Inventory
[Kompleks blanding av hydrokarboner dannet ved å behandle en petroleumsfraksjon med hydrogen i nærvær av en katalysator. Består av hydrokarboner, hovedsakelig C11 til C25, og med omtrentlig kokepunktsintervall fra 205 °C til 400 °C (401 °F til 752 °F).] (no)
C&L Inventory
[Komplekss ogļūdeņražu savienojums, ko iegūst katalizatora klātbūtnē, naftas frakciju apstrādājot ar ūdeņradi. Tajā ir ogļūdeņraži ar oglekļa atomu skaitu diapazonā no C11 līdz C25, un aptuvens tā viršanas temperatūras diapazons ir no 205 °C līdz 400 °C (no 401 °F līdz 752 °F).] (lv)
C&L Inventory
[Komplexe Kombination von Kohlenwasserstoffen, erhalten durch Behandeln einer Erdölfraktion mit Wasserstoff in Gegenwart eines Katalysators. Besteht aus Kohlenwasserstoffen mit Kohlenstoffzahlen vorherrschend im Bereich von C11 bis C25 und siedet im Bereich von etwa 205°C bis 400°C.] (de)
C&L Inventory
[Komplexná kombinácia uhľovodíkov získavaná hydrogenáciou ropnej frakcie za prítomnosti katalyzátora. Pozostáva z uhľovodíkov s počtom atómov uhlíka prevažne v rozmedzí od C11 do C25. Má teplotu varu v rozmedzí približne od 205 °C do 400 °C.] (sk)
C&L Inventory
[O combinaţie complexă de hidrocarburi, obţinut prin tratarea unei fracţiuni petroliere cu hidrogen, în prezenţa unui catalizator. Se compune din hidrocarburi cu număr de atomi de carbon predominant în C11 la C25 şi interval de fierbere aproximativ de la 205 ° C la 400 ° C (401 din 752 la de).] (ro)
C&L Inventory
[Složitá směs uhlovodíků vznikající rafinací ropné frakce vodíkem v přítomnosti katalyzátoru. Je složena z uhlovodíků s počtem uhlíkových atomů převážně v rozmezí C11 až C25 a s rozmezím teploty varu přibližně 205 °C až 400 °C.] (cs)
C&L Inventory
[sudėtingas angliavandenilių mišinys, gautas kataliziškai hidrinant naftos frakciją. Sudarytas daugiausiai iš C11-C25 angliavandenilių ir verda maždaug nuo 205 °C iki 400 °C.] (lt)
C&L Inventory
[Ásványolaj párlatnak katalitikus hidrogénezéssel kapott, bonyolult összetételű szénhidrogén elegy. Túlnyomóan C11 és C25 közötti szénatomszámú szénhidrogéneket tartalmaz. Forráspont tartomány: 205 C° - 400 C° (401 °F - 752 °F).] (hu)
C&L Inventory
[Комплексна комбинация от въглеводороди, получена при обработване на нефтена фракция с водород в присъствие на катализатор. Състои се от въглеводороди с брой на въглеродните атоми основно в интервала от С11 до С25 включително и с температура на кипене приблизително в интервала от 205°C до 400°C (401°F до 752°F).] (bg)
C&L Inventory
Combinación compleja de hidrocarburos obtenida por tratamiento de una fracción de petróleo con hidrógeno en presencia de un catalizador. Compuesta de hidrocarburos con un número de carbonos en su mayor parte dentro del intervalo de C11 a C25 y con un intervalo de ebullición aproximado de 205°C a 400°C. (es)
C&L Inventory
Combinaison complexe d'hydrocarbures obtenue par traitement d'une fraction pétrolière à l'hydrogène en présence d'un catalyseur. Se compose d'hydrocarbures dont le nombre de carbones se situe principalement dans la gamme C11-C25 et dont le point d'ébullition est compris approximativement entre 205°C et 400°C. (fr)
C&L Inventory
Combinazione complessa di idrocarburi ottenuta per trattamento di una frazione di petrolio con idrogeno in presenza di un catalizzatore. AE costituita da idrocarburi con numero di atomi di carbonio prevalentemente nell'intervallo C11-C25 e punto di ebollizione nell'intervallo 205°C-400°C ca. (it)
C&L Inventory
destilados (petróleo), fracción intermedia tratada con hidrógeno (es)
C&L Inventory
destilados (petróleo), médios tratados com hidrogénio (pt)
C&L Inventory
Destilati (nafta), hidroobrađeni srednji (hr)
C&L Inventory
destilati (zemeljsko olje), hidrotretirani srednji del (sl)
C&L Inventory
Destillaadid (nafta), katalüütiliselt hüdrogeenitud, keskmine fraktsioon (et)
C&L Inventory
destillat (petroleum), vätebehandlade medeltunga (sv)
C&L Inventory
Destillate (Erdöl), mit Wasserstoff behandelte mittlere (de)
C&L Inventory
destillaten (aardolie), met waterstof behandelde middenfractie (nl)
C&L Inventory
destillater (petroleum), hydrogenbehandlede middels tunge (no)
C&L Inventory
destillater (råolie), hydrogenbehandlede middeltunge (da)
C&L Inventory
Destiláty (ropné), hydrogenačně dorafinované, střední (cs)
C&L Inventory
destiláty (ropné), hydrogenované, stredné frakcie (sk)
C&L Inventory
Destylaty średnie obrabiane wodorem (ropa naftowa) (pl)
C&L Inventory
Distilate (petroliere), fracţiuni medii hidrotratate (ro)
C&L Inventory
distiliatas (nafta), hidrintas vidutinysis (lt)
C&L Inventory
distillati (petrolio), frazione intermedia di hydrotreating (it)
C&L Inventory
distillats moyens (pétrole), hydrotraités (fr)
C&L Inventory
Een complexe verzameling koolwaterstoffen, verkregen door behandeling van een aardoliefractie met waterstof in de aanwezigheid van een katalysator. Bestaat uit koolwaterstoffen, overwegend C11 tot en met C25, met een kooktraject van ongeveer 205°C tot 400°C. (nl)
C&L Inventory
En sammensat blanding af carbonhydrider opnået ved at behandle en råoliefraktion med hydrogen i tilstedeværelse af en katalysator. Den består af carbonhydrider, overvejende C11 til og med C25, med kogeinterval omtrent fra 205°C til 400°C. (da)
C&L Inventory
gaasiõli — määratlemata (et)
C&L Inventory
Gasolie - niet gespecifieerd (nl)
C&L Inventory
Gasolio - non specificato (it)
C&L Inventory
gassolje - uspesifisert (no)
C&L Inventory
Gasóleo - não especificado (pt)
C&L Inventory
Gasóleo, sin especificar (es)
C&L Inventory
Gasöl - nicht spezifiziert (de)
C&L Inventory
Gazole - non spécifié (fr)
C&L Inventory
gazolis - detaliau nenurodyta (lt)
C&L Inventory
Gázolaj - nem meghatározott (hu)
C&L Inventory
Kaasuöljy - täsmentämätön (fi)
C&L Inventory
Kompleksna kombinacija ogljikovodikov dobljena s tretiranjemnaftne frakcije z vodikom v prisotnosti katalizatorja.Sestoji iz ogljikovodikov, ki imajo številoogljikov pretežno v območju od C11 do C25 in vreliščev območju od približno 205° C do 400° C (401° Fdo 752° F). (sl)
C&L Inventory
Motorină - nespecificat (ro)
C&L Inventory
naftas destilāti, hidrēta vidējā frakcija (lv)
C&L Inventory
nestandarta gāzeļļa (lv)
C&L Inventory
Olej gazowy - niespecyfikowany (pl)
C&L Inventory
plinsko olje - neopredeljeno (sl)
C&L Inventory
Plinsko ulje - nespecificirano (hr)
C&L Inventory
plynový olej - nešpecifikovaný (sk)
C&L Inventory
Plynový olej – nespecifikovaný (cs)
C&L Inventory
Párlatok (ásványolaj), hidrogénnel kezelt középpárlat (hu)
C&L Inventory
Tisleet (maaöljy), vetykäsitelty keskijae (fi)
C&L Inventory
Uma combinação complexa de hidrocarbonetos obtida por tratamento de uma fracção petrolífera com hidrogénio na presença de um catalisador. BE constituída por hidrocarbonetos com números de átomos de carbono predominantemente na gama de C11 até C25 e destila no intervalo de aproximadamente 205°C a 400°C. (pt)
C&L Inventory
Uspecificeret gasolie (da)
C&L Inventory
Złożona mieszanina węglowodorów otrzymywana w wyniku obróbki frakcji ropy naftowej wodorem w obecności katalizatora. Składa się z węglowodorów o liczbie atomów węgla głównie w zakresie od C11 do C25, wrzących w zakresie temp. od ok 205°C do 400°C. (pl)
C&L Inventory
αποστάγματαΑποστάγματα (πετρελαίου), μεσαία κατεργασμένα με υδρογόνο (el)
C&L Inventory
Πετρέλαιο μη προδιαγεγραμμένοΠετρέλαιο μη προδιαγεγραμμένο (el)
C&L Inventory
Газьол – неспецифициран (bg)
C&L Inventory
Дестилати (нефт), обработени с водород (хидротретирани), средни (bg)
C&L Inventory
IUPAC names
[A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205 oC to 400 oC (401 oF to 752 oF).]
C&L Inventory
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205°C to 400°C (401°F to 752°F).
Registration dossier
Distillate (petroleum), hydrotreated middle
Registration dossier
Distillates (petroleum) hydrotreated middle
C&L Inventory
Distillates (petroleum), hydrotreated middle Gasoil - unspecified [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205 oC to 400 oC (401 oF to 752 oF).]
C&L Inventory
Distillates (petroleum), hydrotreated middle; [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C11 through C25 and boiling in the range of approximately 205 oC to 400 oC (401 oF to 752 oF).] Gasoil - unspecified;
C&L Inventory
Distillates (petroleum), hydrotreated middle; Gasoil - unspecified;
C&L Inventory
Distillates (petroleum), hydrotreated middle; Gasoil — unspecified;
C&L Inventory
Distillates (petroleum), hydrotreated midle
C&L Inventory
DISTILLATES PETROLEUM HYDROTREATED MIDDLE
C&L Inventory
Distillates, petroleum, hydrotreated middle
Registration dossier
Hodag PX-110
C&L Inventory
Hydrotreated middle distillate
C&L Inventory, Registration dossier
hydrotreated middle petroleum distillate
Registration dossier
not available
C&L Inventory
Petroleum hydrcarbon
C&L Inventory
Sinarol A
C&L Inventory
Trade names
C11-C25, 205-400 C
C&L Inventory
C11-C25, 205-400 C (Sinarol)
C&L Inventory
destilados (petroleo), fraccion intermedia tratada con hidrogeno
C&L Inventory
Destillat (Erdöl), mit Wasserstoff behandelte mittlere
C&L Inventory
Destillat (petroleum), Wasserstoffbehandelt mittel
C&L Inventory
Destillate (Erdol), mit Wasserstoff behandelte mittlere
C&L Inventory
Distillates (petroleum), hydrotreated middle (C<5% Aromaten); C<5% Aromaten
C&L Inventory
Distillates (petroleum), hydrotreated middle (C<5% aromatics); C<5% Aromaten
C&L Inventory
Distillates (petroleum), hydrotreated middle max 25% Aromatics; C≤25% Aromaten
C&L Inventory
Distillates (petroleum), straight run middle, hydrotreated
C&L Inventory
Distillats moyens (pétrole), hydrotraités (C<5% substances aromatiques)
C&L Inventory
Distillats moyens (pétrole), hydrotraités (C≤25% substances aromatiques)
C&L Inventory
Exxsol D 140
C&L Inventory
Gasöle, entschwefelt (MGÖ, SGÖ)
Registration dossier
Hydrocarbon Solvent
C&L Inventory
Hydrocarbons, Distillates (petroleum), hydrotreated middle
C&L Inventory
HYDROSEAL G 232 H
C&L Inventory
HYDROSEAL G 240 H
C&L Inventory
HYDROSEAL G 250 H
C&L Inventory
Hydroseal G 3 H
C&L Inventory
Hydroseal G 400 H
C&L Inventory
Hydrotreated middle distillate (petroleum)
C&L Inventory
Isopar V
C&L Inventory
Kensol 50H
Registration dossier
Kensol 61H
Registration dossier
MINERAL SEAL OIL
C&L Inventory, Registration dossier
NS 4
C&L Inventory
Penreco 2257 Oil
C&L Inventory
Penreco 2259 Oil
C&L Inventory
Penreco 2260 Oil
C&L Inventory
PENRECO 5011 OIL
C&L Inventory
Petroleum distillates, hydrotreated middle
C&L Inventory
PIONIER 3149
C&L Inventory
Pionier 6509 Bio; 100% Active Matter; active substance
C&L Inventory
Refer to section 3.4
Registration dossier
Shellsol
C&L Inventory
Shellsol D 120
C&L Inventory
Sinarol
C&L Inventory
Sinarol II
C&L Inventory
TOTAL HDF 2000
C&L Inventory
Total HDF 300; 100% Active Matter; active substance
C&L Inventory
Other identifiers
101631-16-7
Other
Deleted CAS number
101794-98-3
Other
Deleted CAS number
64742-46-7
EC Inventory, C&L Inventory, Registration dossier, Pre-Registration process, Other
CAS number
649-221-00-X
C&L Inventory
Index Number
72623-86-0
Other
CAS number
8042-47-5
Other
CAS number
97862-82-3
Other
CAS number

Categories Display


Route: .live2