exemptions-art-4-restrictions-rohs

ROHS - Exemptions from Article 4(1) Restrictions, Annexes III & IV

EU. Exemptions from Art. 4(1) Restrictions (Annexes III & IV), Directive 2011/65/EU (RoHS), as amended by Directive (EU) 2021/1980, OJ L 402, 15 November 2021

This list contains the application exemptions listed in Annexes III and IV to RoHS (2011/65/EU). Annex III contains applications exempted from the restriction in Article 4(1), while Annex IV lists applications exempted from the restriction in Article 4(1) specific to medical devices and monitoring and control instruments.

Last updated 20 stycznia 2022. Database contains 242 unique substances/entries.
Filter the list

 
233-660-5
10294-40-3
III
45
In long time pyrotechnic delay charges of electric initiators of explosives for civil (professional) use
04/20/2026
view-details
201-622-7
85-68-7
IV
47
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2028
view-details
204-211-0
117-81-7
III
43
In rubber components in engine systems, designed for use in equipment that is not intended solely for consumer use and provided that no plasticised material comes into contact with human mucous membranes or into prolonged contact with human skin and the concentration value of bis(2-ethylhexyl) phthalate does not exceed: (a) 30 % by weight of the rubber for (i) gasket coatings, (ii) solid-rubber gaskets, or (iii) rubber components included in assemblies of at least three components using electrical, mechanical or hydraulic energy to do work, and attached to the engine. (b) 10 % by weight of the rubber for rubber-containing components not referred to in point (a)
07/21/2024
view-details
204-211-0
117-81-7
IV
47
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2028
view-details
204-211-0
117-81-7
IV
45
In ion-selective electrodes applied in point of care analysis of ionic substances present in human body fluids and/or in dialysate fluids
07/21/2028
view-details
204-211-0
117-81-7
IV
46
In plastic components in MRI detector coils
01/01/2024
view-details
-
-
III
30
As electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more
view-details
-
-
IV
12
In metallic bonds creating superconducting magnetic circuits in MRI, SQUID, NMR (Nuclear Magnetic Resonance) or FTMS (Fourier Transform Mass Spectrometer) detectors
06/30/2021
view-details
-
-
III
40
In photoresistors for analogue optocouplers applied in professional audio equipment
12/31/2013
view-details
-
-
III
21
In printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses
view-details
-
-
IV
1a
Sensors, detectors and electrodes: In ion selective electrodes including glass of pH electrodes
view-details
-
-
IV
1c
Sensors, detectors and electrodes: In infra-red light detectors
view-details
-
-
III
38
In thick film pastes used on aluminium bonded beryllium oxide
view-details
-
-
IV
1
Equipment utilising or detecting ionising radiation: In detectors for ionising radiation
view-details
-
-
IV
10
In atomic absorption spectroscopy lamps
view-details
-
-
IV
9
In helium-cadmium lasers
view-details
-
-
III
8(a)
In one shot pellet type thermal cut-offs
01/01/2012
view-details
-
-
III
13(b)-(II)
In striking optical filter glass types, excluding applications falling under point 39 of Annex III
07/21/2021
view-details
-
-
III
13(b)
In filter glasses and glasses used for reflectance standards
07/21/2024
view-details
-
-
III
13(b)
In filter glasses and glasses used for reflectance standards
07/21/2023
view-details
-
-
III
13(b)
In filter glasses and glasses used for reflectance standards
07/21/2021
view-details
-
-
III
13(b)-(III)
In glazes used for reflectance standards
07/21/2021
view-details
-
-
III
8(b)
In electrical contacts
view-details
-
-
IV
31a(a)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2021
view-details
-
-
IV
31a(c)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2024
view-details
-
-
IV
31a(b)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2023
view-details
-
-
IV
44
In radiation tolerant video camera tubes designed for cameras with a centre resolution greater than 450 TV lines which are used in environments with ionising radiation exposure exceeding 100 Gy/hour and a total dose in excess of 100kGy
03/31/2027
view-details
-
-
IV
43
Anodes in Hersch cells for oxygen sensors used in industrial monitoring and control instruments, where sensitivity below 10 ppm is required
07/15/2023
view-details
-
-
IV
21
In phosphor coatings in image intensifiers for X-ray images
12/31/2019
view-details
-
-
IV
21
In spare parts for X-ray systems placed on the EU market
01/01/2020
view-details
-
-
IV
20
In X-ray measurement filters
view-details
215-146-2
1306-19-0
III
38
In thick film pastes used on aluminium bonded beryllium oxide
view-details
215-148-3
1306-24-7
III
39(a)
In downshifting cadmium-based semiconductor nanocrystal quantum dots for use in display lighting applications
10/31/2019
view-details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
III
26
In the glass envelope of black light blue lamps
06/01/2011
view-details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
III
32
In seal frit used for making window assemblies for Argon and Krypton laser tubes
view-details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
III
20
In glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs)
06/01/2011
view-details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
III
25
In surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring
view-details
201-557-4
84-74-2
IV
47
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2028
view-details
201-553-2
84-69-5
IV
47
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2028
view-details
-
-
III
9(a)-II
Anticorrosion agent in the cooling solution of the carbon steel cooling system in absorption refrigerators: - designed to operate fully or partly with electrical heater, having an average utilised power input ≥ 75 W at constant running conditions, - designed to fully operate with non-electrical heater
07/21/2021
view-details
-
-
III
9(a)-I
Anticorrosion agent in the cooling solution of the carbon steel cooling system in absorption refrigerators (including minibars) designed to operate fully or partly with electrical heater, having an average utilised power input < 75 W at constant running conditions
03/05/2021
view-details
-
-
III
9
Anticorrosion agent in the cooling solution of the carbon steel cooling system in absorption refrigerators
07/21/2021
view-details
-
-
III
9
Anticorrosion agent in the cooling solution of the carbon steel cooling system in absorption refrigerators
07/21/2024
view-details
-
-
III
9
Anticorrosion agent in the cooling solution of the carbon steel cooling system in absorption refrigerators
07/21/2023
view-details
-
-
IV
31a(a)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2021
view-details
-
-
IV
31a(c)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2024
view-details
-
-
IV
31a(b)
In spare parts recovered from and used for the repair or refurbishment of medical devices, including in vitro diagnostic medical devices, or electron microscopes and their accessories, provided that the reuse takes place in auditable closed-loop business-to-business return systems and that each reuse of parts is notified to the customer
07/21/2023
view-details
-
-
IV
30
In alkali dispensers used to create photocathodes in X-ray image intensifiers
12/31/2019
view-details
-
-
IV
30
In spare parts for X-ray systems placed on the EU market
01/01/2020
view-details
206-104-4
301-04-2
IV
22
Marker for use in stereotactic head frames for use with CT and MRI and in positioning systems for gamma beam and particle therapy equipment
06/30/2021
view-details

export-type