Inventario CE

Inventario CE

Applicazioni nidificate

Inventario CE

The EC inventory published below is a copy as received from the JRC in 2008 on the founding of ECHA. It is comprised of the following lists:

  • EINECS (European INventory of Existing Commercial chemical Substances) as published in O.J. C 146A, 15.6.1990. EINECS is an inventory of substances that were deemed to be on the European Community market between 1 January 1971 and 18 September 1981. EINECS was drawn up by the European Commission in the application of Article 13 of Directive 67/548/EEC, as amended by Directive 79/831/EEC, and in accordance with the detailed provisions of Commission Decision 81/437/EEC. Substances listed in EINECS are considered phase-in substances under the REACH Regulation.
  • ELINCS (European LIst of Notified Chemical Substances) in support of Directive 92/32/EEC, the 7th amendment to Directive 67/548/EEC. ELINCS lists those substances which were notified under Directive 67/548/EEC, the Dangerous Substances Directive Notification of New Substances (NONS) that became commercially available after 18 September 1981.
  • NLP (No-Longer Polymers).  The definition of polymers was changed in April 1992 by Council Directive 92/32/EEC amending Directive 67/548/EEC, with the result that substances previously considered to be polymers were no longer excluded from regulation. Thus the No-longer Polymers (NLP) list was drawn up, consisting of such substances that were commercially available between 18 September 1981 and 31 October 1993.
Database contains 106212 unique substances/entries.
Filter the list

The List does not contain any Substances.
 
310-089-0
102242-57-9
Details
The complex residue resulting from the distillation of C6-24 glycerides which is derived from saponification of natural fats having a carbon range of C6-24. It consists predominantly of glycerides of C6-24 unsatd. fatty acids and other oligomers.
310-088-5
102242-56-8
The complex residue resulting from the distillation of C6-24 glycerides which is derived from saponification of natural fats having a carbon range of C6-24. It consists predominantly of glycerides of C6-24 unsatd. fatty acids and other oligomers.
Details
310-086-4
102242-55-7
Details
The complex residue resulting from the distillation of C12-24 unsatd. fatty acids which is derived from saponification of natural fats having a carbon range of C12-24. It consists predominantly of glycerides of C12-24 unsatd. fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
310-085-9
102242-54-6
The complex residue resulting from the distillation of C12-24 unsatd. fatty acids which is derived from saponification of natural fats having a carbon range of C12-24. It consists predominantly of glycerides of C12-24 unsatd. fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
Details
The complex residue resulting from the distillation of C6-24 fatty acids which is derived from hydrogenation of saponified natural fats having carbon numbers in the range of C6-24. It consists predominantly of glycerides of C6-24 fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
310-084-3
102242-53-5
The complex residue resulting from the distillation of C6-24 fatty acids which is derived from hydrogenation of saponified natural fats having carbon numbers in the range of C6-24. It consists predominantly of glycerides of C6-24 fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
Details
The complex residue resulting from the distillation of C6-24 and C6-24 unsatd. fatty acids methyl esters which is derived from natural fats having a carbon range of C6-24. It consists predominantly of satd. and unsatd. fatty acids methyl esters having carbon numbers greater than C20, dimerization products, and wax esters and boils at > 200°C (392°F) at 10 torr.
310-083-8
102242-52-4
The complex residue resulting from the distillation of C6-24 and C6-24 unsatd. fatty acids methyl esters which is derived from natural fats having a carbon range of C6-24. It consists predominantly of satd. and unsatd. fatty acids methyl esters having carbon numbers greater than C20, dimerization products, and wax esters and boils at > 200°C (392°F) at 10 torr.
Details
The complex residue resulting from the distillation of C6-24 and C6-24 unsatd. fatty acids which is derived from saponification of natural fats having a carbon range of C6-24. It consists predominantly of glycerides of C6-24 and C6-24 unsatd. fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
310-082-2
102242-51-3
The complex residue resulting from the distillation of C6-24 and C6-24 unsatd. fatty acids which is derived from saponification of natural fats having a carbon range of C6-24. It consists predominantly of glycerides of C6-24 and C6-24 unsatd. fatty acids, sterols, and wax esters and boils at > 150°C (302°F) at 10 torr.
Details
The complex residue resulting from the vacuum distillation of C12-24 unsatd. fatty alcohols which is derived from hydrogenation of C12-24 unsatd. fatty acids methyl esters. It consists predominantly of unsatd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
310-081-7
102242-50-2
The complex residue resulting from the vacuum distillation of C12-24 unsatd. fatty alcohols which is derived from hydrogenation of C12-24 unsatd. fatty acids methyl esters. It consists predominantly of unsatd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
Details
The complex residue resulting from the vacuum distillation of C6-24 fatty alcohols which is derived from hydrogenation of C6-24 fatty acids methyl esters. It consists predominantly of satd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
310-080-1
102242-49-9
The complex residue resulting from the vacuum distillation of C6-24 fatty alcohols which is derived from hydrogenation of C6-24 fatty acids methyl esters. It consists predominantly of satd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
Details
The complex residue resulting from the vacuum distillation of C6-24 and C6-24 unsatd. fatty alcohols which is derived from hydrogenation of C6-24 and C6-24 unsatd. fatty acids methyl esters. It consists predominantly of satd. and unsatd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
310-079-6
102242-48-8
The complex residue resulting from the vacuum distillation of C6-24 and C6-24 unsatd. fatty alcohols which is derived from hydrogenation of C6-24 and C6-24 unsatd. fatty acids methyl esters. It consists predominantly of satd. and unsatd. fatty alcohols having carbon numbers greater than C18, dimerization products, and long chain esters having carbon numbers greater than C32 and boils at > 250°C (482°F) at 10 torr.
Details
310-078-0
102184-96-3
Details
310-077-5
102184-95-2
Details
The residue obtained from the carburizing of niobium and tantalum oxides.
310-075-4
102184-94-1
The residue obtained from the carburizing of niobium and tantalum oxides.
Details
310-074-9
102110-72-5
Details
310-073-3
102110-71-4
Details
310-072-8
102110-70-3
Details
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
310-071-2
102110-69-0
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
Details
310-070-7
102110-68-9
Details
310-069-1
102110-67-8
Details
The residue obtained from roasting of a tin concentrate or ore to remove some of the volatile elements such as mercury or sulfur. Composed primarily of tin but also containing other non-ferrous metals and gangue constituents.
310-068-6
102110-66-7
The residue obtained from roasting of a tin concentrate or ore to remove some of the volatile elements such as mercury or sulfur. Composed primarily of tin but also containing other non-ferrous metals and gangue constituents.
Details
The residue obtained from leaching of a tin concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of tin but also containing other non-ferrous metals and gangue constituents.
310-067-0
102110-65-6
The residue obtained from leaching of a tin concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of tin but also containing other non-ferrous metals and gangue constituents.
Details
The product obtained from the purification of waste waters from production and gas purification processes during non-ferrous metal production. Composed primarily of gypsum.
310-066-5
102110-64-5
The product obtained from the purification of waste waters from production and gas purification processes during non-ferrous metal production. Composed primarily of gypsum.
Details
The product obtained from wet dust-collecting equipment used in the casting of iron goods. Composed primarily of aluminum oxide, carbon, iron oxide and silicon dioxide.
310-064-4
102110-63-4
The product obtained from wet dust-collecting equipment used in the casting of iron goods. Composed primarily of aluminum oxide, carbon, iron oxide and silicon dioxide.
Details
The product obtained by the purification of copper-lead ore concentrate roasting offgas. Composed primarily of arsenic oxide (As2O3).
310-063-9
102110-62-3
The product obtained by the purification of copper-lead ore concentrate roasting offgas. Composed primarily of arsenic oxide (As2O3).
Details
The product obtained by the purification of copper ore concentrate roasting offgas. Composed primarily of lead, mercury and selenium.
310-062-3
102110-61-2
The product obtained by the purification of copper ore concentrate roasting offgas. Composed primarily of lead, mercury and selenium.
Details
A product obtained by the treatment of battery scraps to recover lead. Composed primarily of oxides and sulfates of antimony and lead.
310-061-8
102110-60-1
A product obtained by the treatment of battery scraps to recover lead. Composed primarily of oxides and sulfates of antimony and lead.
Details
310-060-2
102110-59-8
Details
The residue obtained from roasting of a silver concentrate or ore to remove some of the volatile elements such as mercury or sulfur. Composed primarily of silver but also containing other non-ferrous metals and gangue constituents.
310-059-7
102110-57-6
The residue obtained from roasting of a silver concentrate or ore to remove some of the volatile elements such as mercury or sulfur. Composed primarily of silver but also containing other non-ferrous metals and gangue constituents.
Details
The residue obtained from leaching of a silver concentrate or ore to remove some of the soluble elements such as arsenic or iron. Composed primarily of silver but also containing other non-ferrous metals and gangue constituents.
310-058-1
102110-56-5
The residue obtained from leaching of a silver concentrate or ore to remove some of the soluble elements such as arsenic or iron. Composed primarily of silver but also containing other non-ferrous metals and gangue constituents.
Details
A complex combination of hydrocarbons obtained by the distillation of the products of steam cracking or similar processes after taking off the very light products resulting in a residue starting with hydrocarbons having carbon numbers greater than C5. It consists predominantly of aromatic hydrocarbons having carbon numbers greater than C5 and boiling above approximately 40°C (104°F).
310-057-6
102110-55-4
A complex combination of hydrocarbons obtained by the distillation of the products of steam cracking or similar processes after taking off the very light products resulting in a residue starting with hydrocarbons having carbon numbers greater than C5. It consists predominantly of aromatic hydrocarbons having carbon numbers greater than C5 and boiling above approximately 40°C (104°F).
Details
The residue obtained by solvent extraction of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
310-056-0
102110-54-3
The residue obtained by solvent extraction of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
Details
The residue obtained from magnetic separation of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
310-055-5
102110-53-2
The residue obtained from magnetic separation of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
Details
310-053-4
102110-52-1
Details
The residue obtained from electrostatic separation of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
310-052-9
102110-51-0
The residue obtained from electrostatic separation of ores, concentrates and secondary materials during manufacture of tungsten and its alloys. Composed primarily of iron, tin and tungsten.
Details
The residues obtained by the addition of aluminum or zinc to end liquors obtained from secondary refining of gold, iridium, osmium, palladium, platinum, rhenium, ruthenium or silver. Composed primarily of the precious metals, ammonium chloride and chlorides of aluminum, magnesium and zinc.
310-051-3
102110-50-9
The residues obtained by the addition of aluminum or zinc to end liquors obtained from secondary refining of gold, iridium, osmium, palladium, platinum, rhenium, ruthenium or silver. Composed primarily of the precious metals, ammonium chloride and chlorides of aluminum, magnesium and zinc.
Details
310-050-8
102110-49-6
Details
The residue obtained from leaching of a lead concentrate or ore to remove some of the soluble elements such as arsenic or iron. Composed primarily of lead but also containing other non-ferrous metals and gangue constituents.
310-049-2
102110-48-5
The residue obtained from leaching of a lead concentrate or ore to remove some of the soluble elements such as arsenic or iron. Composed primarily of lead but also containing other non-ferrous metals and gangue constituents.
Details
310-048-7
102110-47-4
Details
310-047-1
102110-46-3
Details
310-046-6
102110-45-2
Details
310-045-0
102110-44-1
Details
310-044-5
102110-43-0
Details
The residue obtained from leaching of a copper concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of copper but also containing other non-ferrous metals and gangue constituents.
310-042-4
102110-42-9
The residue obtained from leaching of a copper concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of copper but also containing other non-ferrous metals and gangue constituents.
Details
The residue obtained from leaching of a bismuth concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of bismuth but also containing other non-ferrous metals and gangue constituents.
310-041-9
102110-41-8
The residue obtained from leaching of a bismuth concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of bismuth but also containing other non-ferrous metals and gangue constituents.
Details
The residue obtained from roasting of an antimony concentrate or ore to remove volatile elements such as mercury or sulfur. Composed primarily of antimony but also containing other non-ferrous metals and gangue constituents.
310-040-3
102110-40-7
The residue obtained from roasting of an antimony concentrate or ore to remove volatile elements such as mercury or sulfur. Composed primarily of antimony but also containing other non-ferrous metals and gangue constituents.
Details
The residue obtained from leaching of an antimony concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of antimony but also containing other non-ferrous metals and gangue constituents.
310-039-8
102110-39-4
The residue obtained from leaching of an antimony concentrate or ore to remove soluble elements such as arsenic or iron. Composed primarily of antimony but also containing other non-ferrous metals and gangue constituents.
Details
310-038-2
102110-38-3
Details
310-037-7
102110-37-2
Details
310-036-1
102110-36-1
Details
310-035-6
102110-35-0
Details
310-034-0
102110-34-9
Details
310-033-5
102110-33-8
Details
310-031-4
102110-32-7
Details
310-030-9
102110-31-6
Details
310-029-3
102110-30-5
Details
310-028-8
102110-29-2
Details
310-027-2
102110-28-1
Details
310-026-7
102110-27-0
Details
310-025-1
102110-26-9
Details
310-024-6
102110-25-8
Details
310-023-0
102110-24-7
Details
310-022-5
102110-23-6
Details
310-020-4
102110-22-5
Details
310-019-9
102110-21-4
Details
310-018-3
102110-20-3
Details
310-017-8
102110-19-0
Details
310-016-2
102110-18-9
Details
310-015-7
102110-17-8
Details
310-014-1
102110-16-7
Details
A complex combination of hydrocarbons obtained by distillation of the products from a steam-cracking process. It consists predominantly of hydrocarbons having carbon numbers of C5 and dicyclopentadiene and boiling in the range of approximately 30°C to 170°C (86°F to 338°F).
310-013-6
102110-15-6
A complex combination of hydrocarbons obtained by distillation of the products from a steam-cracking process. It consists predominantly of hydrocarbons having carbon numbers of C5 and dicyclopentadiene and boiling in the range of approximately 30°C to 170°C (86°F to 338°F).
Details
A complex combination of hydrocarbons obtained by distillation of steam-cracked naphtha. It consists predominantly of hydrocarbons having carbon numbers in the range of C3 through C6, predominantly C5.
310-012-0
102110-14-5
A complex combination of hydrocarbons obtained by distillation of steam-cracked naphtha. It consists predominantly of hydrocarbons having carbon numbers in the range of C3 through C6, predominantly C5.
Details
310-011-5
102110-13-4
Details
310-009-4
102110-12-3
Details
310-008-9
102110-11-2
Details
310-007-3
102110-10-1
C20H32O4
Details
310-006-8
102047-29-0
Details
310-005-2
102047-28-9
Details
310-004-7
102047-27-8
Details
310-003-1
102047-26-7
Details
310-002-6
102047-25-6
Details
310-001-0
102047-24-5
Details
310-000-5
102047-23-4
Details
309-999-0
101940-13-0
Details
309-998-5
101940-12-9
Details
309-996-4
101940-11-8
Details
309-995-9
101940-10-7
Details
309-994-3
101940-09-4
Details
309-993-8
101940-08-3
Details
309-992-2
101940-07-2
Details
309-991-7
101940-06-1
Details
309-990-1
101896-31-5
Details
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Polygala paucifolia, Polygalaceae.
309-989-6
101896-30-4
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Polygala paucifolia, Polygalaceae.
Details
309-988-0
101896-29-1
Details
309-987-5
101896-28-0
Details
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of substituted two ring aromatic hydrocarbons and aromatic nitrogen bases boiling in the range of approximately 225°C to 255°C (437°F to 491°F).
309-985-4
101896-27-9
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of substituted two ring aromatic hydrocarbons and aromatic nitrogen bases boiling in the range of approximately 225°C to 255°C (437°F to 491°F).
Details
A residue from the distillation of crude benzole to remove benzole fronts. Composed primarily of benzene, toluene and xylenes boiling in the range of approximately 75°C to 200°C (167°F to 392°F).
309-984-9
101896-26-8
A residue from the distillation of crude benzole to remove benzole fronts. Composed primarily of benzene, toluene and xylenes boiling in the range of approximately 75°C to 200°C (167°F to 392°F).
Details
309-983-3
101896-25-7
C20H26N3O.ClO4
Details
309-982-8
101896-23-5
C15H30O
Details
309-981-2
101896-22-4
C26H18F38NO6P
Details
309-980-7
101896-21-3
C19H24F19N2O8P
Details
309-979-1
101836-91-3
C32H20CrN8O8.H4N
Details
309-978-6
101810-92-8
C21H32N4O4
Details
By-products obtained from treatment of phosphate rock with phosphoric acid, caustic soda and other chemicals in the purification of phosphoric acid for technical phosphate production.
309-977-0
101795-04-4
By-products obtained from treatment of phosphate rock with phosphoric acid, caustic soda and other chemicals in the purification of phosphoric acid for technical phosphate production.
Details
A complex combination of hydrocarbons obtained by subjecting a petroleum naphtha to a sweetening process to convert mercaptans or to remove acidic impurities. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 through C8 and boiling in the range of approximately 20°C to 130°C (68°F to 266°F).
309-976-5
101795-01-1
A complex combination of hydrocarbons obtained by subjecting a petroleum naphtha to a sweetening process to convert mercaptans or to remove acidic impurities. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 through C8 and boiling in the range of approximately 20°C to 130°C (68°F to 266°F).
Details
A complex combination of hydrocarbons obtained by distillation of products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C8 through C12 and boiling in the range of approximately 140°C to 210°C (284°F to 410°F).
309-974-4
101794-97-2
A complex combination of hydrocarbons obtained by distillation of products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C8 through C12 and boiling in the range of approximately 140°C to 210°C (284°F to 410°F).
Details
A complex combination of compounds obtained by catalytic hot air oxidation of a petroleum fraction having carbon numbers predominantly in the range of C19 through C40 and boiling in the range of approximately 390°C to 550°C (734°F to 1022°F).
309-973-9
101794-94-9
A complex combination of compounds obtained by catalytic hot air oxidation of a petroleum fraction having carbon numbers predominantly in the range of C19 through C40 and boiling in the range of approximately 390°C to 550°C (734°F to 1022°F).
Details
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of indole and methylnaphthalene boiling in the range of approximately 235°C to 255°C (455°F to 491°F).
309-972-3
101794-91-6
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of indole and methylnaphthalene boiling in the range of approximately 235°C to 255°C (455°F to 491°F).
Details
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of alkyl-substituted one ring aromatic hydrocarbons boiling in the range of approximately 135°C to 210°C (275°F to 410°F). May also include unsaturated hydrocarbons such as indene and coumarone.
309-971-8
101794-90-5
A distillate from the fractional distillation of high temperature coal tar. Composed primarily of alkyl-substituted one ring aromatic hydrocarbons boiling in the range of approximately 135°C to 210°C (275°F to 410°F). May also include unsaturated hydrocarbons such as indene and coumarone.
Details
The dilute aqueous solution condensed from the gas evolved in the low-temperature destructive distillation of coal. Composed primarily of ammonium carbonate and other ammonium salts.
309-970-2
101794-87-0
The dilute aqueous solution condensed from the gas evolved in the low-temperature destructive distillation of coal. Composed primarily of ammonium carbonate and other ammonium salts.
Details
309-969-7
101794-86-9
Details
309-968-1
101794-85-8
Details
309-967-6
101794-84-7
Details
309-966-0
101794-83-6
Details
Substance obtained by acidic, alkaline, or enzymatic hydrolysis of fusarium graminearum composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.
309-965-5
101794-82-5
Substance obtained by acidic, alkaline, or enzymatic hydrolysis of fusarium graminearum composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.
Details
Extractives and their physically modified derivatives such as proteins, carbohydrates, lipids, nucleic acids, inorganic ions, etc. obtained from Protaminobacter ruber, Methylomonadaceae.
309-963-4
101794-81-4
Extractives and their physically modified derivatives such as proteins, carbohydrates, lipids, nucleic acids, inorganic ions, etc. obtained from Protaminobacter ruber, Methylomonadaceae.
Details
309-962-9
101794-80-3
Details
The dusts from an electrostatic filter obtained during the combustion of waste substances from the preparation of acrylonitrile according to the Sohio process. Composed primarily of carbonates and sulfates of antimony and molybdenum.
309-961-3
101794-79-0
The dusts from an electrostatic filter obtained during the combustion of waste substances from the preparation of acrylonitrile according to the Sohio process. Composed primarily of carbonates and sulfates of antimony and molybdenum.
Details
309-960-8
101794-78-9
Details
309-959-2
101794-77-8
Details
A complex combination of hydrocarbons obtained from mixed coal tar pitch-polystyrene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
309-958-7
101794-76-7
A complex combination of hydrocarbons obtained from mixed coal tar pitch-polystyrene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
Details
A complex combination of hydrocarbons obtained from mixed coal tar pitch-polyethylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
309-957-1
101794-75-6
A complex combination of hydrocarbons obtained from mixed coal tar pitch-polyethylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
Details
A complex combination hydrocarbons obtained from mixed coal tar pitch-polyethylene-polypropylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
309-956-6
101794-74-5
A complex combination hydrocarbons obtained from mixed coal tar pitch-polyethylene-polypropylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 100°C to 220°C (212°F to 428°F) according to DIN 52025.
Details
A complex combination of hydrocarbons obtained from mixed aromatic oil-polystyrene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 284°F) according to DIN 52025.
309-955-0
101794-73-4
A complex combination of hydrocarbons obtained from mixed aromatic oil-polystyrene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 284°F) according to DIN 52025.
Details
A complex combination of hydrocarbons obtained from mixed aromatic oil-polyethylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 284°F) according to DIN 52025.
309-954-5
101794-72-3
A complex combination of hydrocarbons obtained from mixed aromatic oil-polyethylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 284°F) according to DIN 52025.
Details
A complex combination of hydrocarbons obtained from mixed aromatic oil-polyethylene-polypropylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 184°F) according to DIN 52025.
309-952-4
101794-71-2
A complex combination of hydrocarbons obtained from mixed aromatic oil-polyethylene-polypropylene pyrolysis. Composed primarily of polycyclic aromatic hydrocarbons having carbon numbers predominantly in the range of C20 through C28 and having a softening point of 30°C to 140°C (86°F to 184°F) according to DIN 52025.
Details
309-951-9
101794-70-1
Details
309-950-3
101631-25-8
Details
309-949-8
101631-24-7
Details
309-948-2
101631-23-6
Details
309-947-7
101631-22-5
Details
A complex combination of compounds obtained by the fractional distillation of residual oils which are obtained during the pyrolytic recovery of alkenes and alkynes from mineral oil products or natural gas. It consists predominantly of mono- and dinuclear aromatic hydrocarbons boiling in the range of approximately 130°C to 215°C (266°F to 419°F).
309-946-1
101631-21-4
A complex combination of compounds obtained by the fractional distillation of residual oils which are obtained during the pyrolytic recovery of alkenes and alkynes from mineral oil products or natural gas. It consists predominantly of mono- and dinuclear aromatic hydrocarbons boiling in the range of approximately 130°C to 215°C (266°F to 419°F).
Details
A complex combination of hydrocarbons obtained from a distillation process of crude petroleum. It consists predominantly of hydrocarbons having carbon numbers in the range of C8 through C12 and boiling in the range of approximately 130°C to 210°C (266°F to 410°F).
309-945-6
101631-20-3
A complex combination of hydrocarbons obtained from a distillation process of crude petroleum. It consists predominantly of hydrocarbons having carbon numbers in the range of C8 through C12 and boiling in the range of approximately 130°C to 210°C (266°F to 410°F).
Details
A complex combination of hydrocarbons obtained from the distillation of petroleum and subsequent hydrotreatment. It consists predominantly of alkanes, cycloalkanes and alkylbenzenes having carbon numbers predominantly in the range of C12 through C16 and boiling in the range of approximately 230°C to 270°C (446°F to 518°F).
309-944-0
101631-19-0
A complex combination of hydrocarbons obtained from the distillation of petroleum and subsequent hydrotreatment. It consists predominantly of alkanes, cycloalkanes and alkylbenzenes having carbon numbers predominantly in the range of C12 through C16 and boiling in the range of approximately 230°C to 270°C (446°F to 518°F).
Details
The recovered oil obtained by skimming all plant oil bearing water streams. It consists predominantly of lubricating oil, oil additives and intermediates.
309-943-5
101631-18-9
The recovered oil obtained by skimming all plant oil bearing water streams. It consists predominantly of lubricating oil, oil additives and intermediates.
Details
309-941-4
101631-17-8
Details
A complex combination of hydrocarbons obtained by distillation of steam cracking heavy tars. It consists predominantly of highly alkylated aromatic hydrocarbons boiling in the range of approximately 100°C to 250°C (212°F to 482°F).
309-940-9
101631-15-6
A complex combination of hydrocarbons obtained by distillation of steam cracking heavy tars. It consists predominantly of highly alkylated aromatic hydrocarbons boiling in the range of approximately 100°C to 250°C (212°F to 482°F).
Details
A complex combination of hydrocarbons obtained by distillation of steam cracking heavy residues. It consists predominantly of highly alkylated heavy aromatic hydrocarbons boiling in the range of approximately 250°C to 400°C (482°F to 752°F).
309-939-3
101631-14-5
A complex combination of hydrocarbons obtained by distillation of steam cracking heavy residues. It consists predominantly of highly alkylated heavy aromatic hydrocarbons boiling in the range of approximately 250°C to 400°C (482°F to 752°F).
Details
A complex combination of hydrocarbons obtained by distillation of catalytic cracking heavy tars. It consists predominantly of highly alkylated aromatic hydrocarbons boiling in the range of approximately 100°C to 250°C (212°F to 482°F).
309-938-8
101631-13-4
A complex combination of hydrocarbons obtained by distillation of catalytic cracking heavy tars. It consists predominantly of highly alkylated aromatic hydrocarbons boiling in the range of approximately 100°C to 250°C (212°F to 482°F).
Details
309-937-2
101500-43-0
Details
309-936-7
101403-98-9
Details
309-935-1
101377-34-8
C24H42O13
Details
309-934-6
101377-33-7
C33H58O18
Details
309-933-0
101357-35-1
Details
309-932-5
101357-33-9
Details
309-930-4
101357-32-8
Details
309-929-9
101357-31-7
Details
309-928-3
101357-30-6
Details
309-927-8
101357-29-3
Details
309-926-2
101357-28-2
Details
309-925-7
101357-27-1
Details
309-924-1
101357-26-0
Details
309-923-6
101357-25-9
Details
309-922-0
101357-24-8
Details
309-921-5
101357-23-7
Details
309-919-4
101357-22-6
Details
309-918-9
101357-21-5
Details
309-917-3
101357-20-4
Details
309-916-8
101357-19-1
Details
309-915-2
101357-18-0
Details
309-914-7
101357-17-9
Details
309-913-1
101357-16-8
Details
309-912-6
101357-15-7
Details
309-911-0
101357-13-5
Details
309-910-5
101357-12-4
Details
309-908-4
101357-11-3
Details
309-907-9
101357-10-2
Details
309-906-3
101357-09-9
Details
309-905-8
101357-08-8
Details
309-904-2
101357-07-7
Details
309-903-7
101357-06-6
Details
309-902-1
101357-05-5
Details
309-901-6
101357-04-4
Details
309-900-0
101357-03-3
Details
309-899-7
101357-02-2
Details
309-898-1
101357-01-1
Details
309-897-6
101357-00-0
Details
309-896-0
101356-99-4
Details
309-895-5
101356-98-3
Details
309-893-4
101356-97-2
Details
309-892-9
101356-96-1
Details
309-891-3
101356-95-0
Details
309-890-8
101356-94-9
Details
A distillate from low-temperature coal tar. Composed primarily of hydrocarbons, phenolic compounds and aromatic nitrogen bases boiling in the range of approximately 160°C to 340°C (320°F to 644°F).
309-889-2
101316-87-4
A distillate from low-temperature coal tar. Composed primarily of hydrocarbons, phenolic compounds and aromatic nitrogen bases boiling in the range of approximately 160°C to 340°C (320°F to 644°F).
Details
An acidified alkaline extract of brown coal tar distillate. Composed primarily of phenol and phenol homologs.
309-888-7
101316-86-3
An acidified alkaline extract of brown coal tar distillate. Composed primarily of phenol and phenol homologs.
Details
Residues from fractional distillation of low temperature coal tar to remove oils that boil in a range up to approximately 300°C (572°F). Composed primarily of aromatic compounds.
309-887-1
101316-85-2
Residues from fractional distillation of low temperature coal tar to remove oils that boil in a range up to approximately 300°C (572°F). Composed primarily of aromatic compounds.
Details
A tar obtained from low temperature carbonization and low temperature gasification of brown coal. Composed primarily of aliphatic, naphthenic and cyclic aromatic hydrocarbons, heteroaromatic hydrocarbons and cyclic phenols.
309-886-6
101316-84-1
A tar obtained from low temperature carbonization and low temperature gasification of brown coal. Composed primarily of aliphatic, naphthenic and cyclic aromatic hydrocarbons, heteroaromatic hydrocarbons and cyclic phenols.
Details
An oil distilled from brown-coal tar. Composed primarily of aliphatic, naphthenic and one- to three-ring aromatic hydrocarbons, their alkyl derivatives, heteroaromatics and one- and two-ring phenols boiling in the range of approximately 150°C to 360°C (302°F to 680°F).
309-885-0
101316-83-0
An oil distilled from brown-coal tar. Composed primarily of aliphatic, naphthenic and one- to three-ring aromatic hydrocarbons, their alkyl derivatives, heteroaromatics and one- and two-ring phenols boiling in the range of approximately 150°C to 360°C (302°F to 680°F).
Details
A complex combination of hydrocarbons obtained by the catalytic hydrodesulfurization of a petroleum fraction. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C10 through C13 and boiling in the range of approximately 175°C to 220°C (347°F to 428°F).
309-884-5
101316-82-9
A complex combination of hydrocarbons obtained by the catalytic hydrodesulfurization of a petroleum fraction. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C10 through C13 and boiling in the range of approximately 175°C to 220°C (347°F to 428°F).
Details
A complex combination of hydrocarbons obtained by the catalytic hydrodesulfurization of a petroleum fraction. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C10 through C13 and boiling in the range of approximately 180°C to 240°C (356°F to 464°F).
309-882-4
101316-81-8
A complex combination of hydrocarbons obtained by the catalytic hydrodesulfurization of a petroleum fraction. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C10 through C13 and boiling in the range of approximately 180°C to 240°C (356°F to 464°F).
Details
A complex combination of hydrocarbons obtained by the distillation of hydrocracked petroleum distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 235°C to 290°C (455°F to 554°F).
309-881-9
101316-80-7
A complex combination of hydrocarbons obtained by the distillation of hydrocracked petroleum distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C9 through C16 and boiling in the range of approximately 235°C to 290°C (455°F to 554°F).
Details
309-880-3
101316-78-3
Details
A complex combination of hydrocarbons obtained by fractionation from hydrodesulphurised coker distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 to C11 and boiling in the range of approximately 23°C to 196°C (73°F to 385°F).
309-879-8
101316-76-1
A complex combination of hydrocarbons obtained by fractionation from hydrodesulphurised coker distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 to C11 and boiling in the range of approximately 23°C to 196°C (73°F to 385°F).
Details
A complex combination of hydrocarbons obtained by refining waste oils without catalytic treatment with hydrogen. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 100 SUS at 100°F (19cSt at 40°C).
309-878-2
101316-73-8
A complex combination of hydrocarbons obtained by refining waste oils without catalytic treatment with hydrogen. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 100 SUS at 100°F (19cSt at 40°C).
Details
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C24 through C50 and produces a finished oil with a viscosity in the order of 16cSt to 75cSt at 40°C (104°F).
309-877-7
101316-72-7
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C24 through C50 and produces a finished oil with a viscosity in the order of 16cSt to 75cSt at 40°C (104°F).
Details
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C35 and produces a finished oil with a viscosity in the order of 37cSt to 44cSt at 40°C (104°F).
309-876-1
101316-71-6
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C35 and produces a finished oil with a viscosity in the order of 37cSt to 44cSt at 40°C (104°F).
Details
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C17 through C32 and produces a finished oil with a viscosity in the order of 17cSt to 23cSt at 40°C (104°F).
309-875-6
101316-70-5
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C17 through C32 and produces a finished oil with a viscosity in the order of 17cSt to 23cSt at 40°C (104°F).
Details
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of vacuum distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C25 and produces a finished oil with a viscosity in the order of 32cSt to 37cSt at 100°C (212°F).
309-874-0
101316-69-2
A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of vacuum distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C25 and produces a finished oil with a viscosity in the order of 32cSt to 37cSt at 100°C (212°F).
Details
A complex combination of alkylbenzenes obtained by the catalytic reforming of kerosine. It consists predominantly of alkylbenzenes having carbon numbers predominantly in the range of C8 through C15 and boiling in the range of approximately 160°C to 260°C (320°F to 500°F).
309-873-5
101316-68-1
A complex combination of alkylbenzenes obtained by the catalytic reforming of kerosine. It consists predominantly of alkylbenzenes having carbon numbers predominantly in the range of C8 through C15 and boiling in the range of approximately 160°C to 260°C (320°F to 500°F).
Details
A complex combination of hydrocarbons obtained by distillation of hydrotreated naphtha followed by solvent extraction. It consists predominantly of saturated hydrocarbons and boiling in the range of approximately 65°C to 70°C (149°F to 158°F).
309-871-4
101316-67-0
A complex combination of hydrocarbons obtained by distillation of hydrotreated naphtha followed by solvent extraction. It consists predominantly of saturated hydrocarbons and boiling in the range of approximately 65°C to 70°C (149°F to 158°F).
Details
A complex combination of hydrocarbons obtained during the sorptions of toluene from a hydrocarbon fraction from cracked gasoline treated with hydrogen in the presence of a catalyst. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C6 through C8 and boiling in the range of approximately 80°C to 135°C (176°F to 275°F).
309-870-9
101316-66-9
A complex combination of hydrocarbons obtained during the sorptions of toluene from a hydrocarbon fraction from cracked gasoline treated with hydrogen in the presence of a catalyst. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C6 through C8 and boiling in the range of approximately 80°C to 135°C (176°F to 275°F).
Details

Export search results to: