plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
RELEVANT LEGISLATION
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Furan-2,5-dicarboxylic acid
EC / List no: - CAS no: -FCM No |
1031
|
|
Additive or PPA |
no
|
|
Use as monomer/macromolecule |
yes
|
|
FRF applicable |
no
|
|
SML (mg/kg) |
5 mg/kg
|
|
Restriction(s) |
Only to be used as a monomer in the production of polyethylene furanoate.
The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as furan-2,5-dicarboxylic acid).
|
|
Notes on verification |
V22 When used in contact with non-alcoholic foods for which Table 2 of Annex III assigns food simulant D1, food simulant C shall be used for verification of compliance instead of food simulant D1.
V23 When a final material/article containing this substance is placed on the market, a well described method suitable for use by a competent authority to determine oligomer migration compliance with the restrictions in column 10 Table 1 shall be part of the supporting document referred to in Art. 16. Reference shall be made if an adequate method is publicly available. If it requires a calibration sample, a sufficient sample shall be supplied to the competent authority on its request.
|
|
Expressed As |
As Furan-2,5-dicarboxylic acid
|