Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided Details
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided Details
0066-01 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components Commission decided Details
0259-01 Initial Chromium trioxide 215-607-8 1333-82-0 MT METAL TECH S.r.l. [application transferred from “ST SRL” due to a notified legal entity change] Use for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (functional electroplating with decorative character) Opinions adopted Details
0249-01 Initial Chromium trioxide 215-607-8 1333-82-0 Monroe Czechia s.r.o. The use of Chromium Trioxide (EC 215-607-8) by Monroe Czechia s.r.o. in the functional chrome plating of shock absorber rods. Opinions adopted Details
0232-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Monroe Czechia s.r.o. Use of dichromium tris(chromate) in a post-treatment step of the autodeposition coating process of shock absorbers for automotive vehicles. Opinions adopted Details
0273-01 Initial Chromium trioxide 215-607-8 1333-82-0 MIKRO METAL S.R.L. Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance Opinions adopted Details
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided Details
0242-01 Review report Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as extraction solvent in the manufacture of polyethylene separators for lead-acid batteries Opinions adopted Details
0317-01 Initial Acids generated from chromium trioxide and their oligomers - - Micron srl Dilution of chromic acid solution at concentrations lower than 0.1% for the use in passivation baths Opinions adopted Details
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided Details
0120-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 Microbeads AS Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste Commission decided Details
0312-01 Initial Chromium trioxide 215-607-8 1333-82-0 Metalplast sas; CO.BE. sas di Colombo Nadia e Flavia Industrial use of hexavalent chromium for a pre-treatment step (etching) in the electroplating process for plastic materials with various applications. Opinion development Details
0312-02 Initial Chromium trioxide 215-607-8 1333-82-0 Metalplast sas; CO.BE. sas di Colombo Nadia e Flavia Industrial use of chromium trioxide for plating on plastic materials to create a long-lasting high durability chromium decorative surface in the electroplating process for various applications. Opinion development Details
0261-01 Initial Chromium trioxide 215-607-8 1333-82-0 Metalbrass s.r.l. Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0202-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merckle-GmbH-Ulm The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product Opinions adopted Details
0197-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. Commission decided Details
0197-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). Commission decided Details
0175-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck KGaA Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards Commission decided Details
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided Details
0157-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck Biodevelopment SAS
Fujifilm Diosynth Biotechnologies (UK) Ltd - [Application void as of 01/01/2021]
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies Commission decided Details
0305-01 Initial Chromium trioxide 215-607-8 1333-82-0 Meoni e Bartoletti S.p.A. Use of Chromium Trioxide for the hard-chrome plating of hydraulic and pneumatic cylinders for various applications, and inner tubes of motorbike front suspension for the automotive industry. Opinion development Details
0299-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - 9036-19-5 MeiraGTx Ireland Designated Activity Company Use of 4-tert-OPnEO as a manufacturing aid in the production of gene therapies Opinions adopted Details
0234-02 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Chromium trioxide-based functional chrome plating of cylinders used in the rotogravure printing and embossing industry. Opinions adopted Details
0234-01 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Formulation of chromium trioxide-based electrolyte for electroplating process. Opinions adopted Details
0270-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAIER S. COOP. MAIER CZ s.r.o.; MAIER CROMOPLASTICA S.p.A Functional chrome plating with decorative character for automotive applications Opinions adopted Details
0270-02 Initial Chromium trioxide 215-607-8 1333-82-0 MAIER S. COOP. MAIER CZ s.r.o.; MAIER CROMOPLASTICA S.p.A Etching of plastics with chromium trioxide as pre-treatment step for electroplating of plastics for automotive applications Opinions adopted Details
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided Details
0296-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE - Componentes de Motores, S.A. Chromium-trioxide-based functional chrome plating of piston rings for automotive applications Opinions adopted Details
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided Details
0048-01 Initial Potassium dichromate 231-906-6 7778-50-9 LYNRED [name of applicant in the original application: “SOFRADIR” updated due to a notified corporate name change] Industrial use of potassium dichromate-based mixtures during the steps of initial and final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology Commission decided Details
0048-02 Initial Potassium dichromate 231-906-6 7778-50-9 LYNRED [name of applicant in the original application: “SOFRADIR” updated due to a notified corporate name change] Industrial use of potassium dichromate based mixture during the etching of both InSb substrate sides during the production of optoelectronic components gathering a readout and an infrared detecting circuit with the InSb technology Commission decided Details
0357-01 Review report potassium dichromate 231-906-6 7778-50-9 LYNRED Industrial use of potassium dichromate-based mixtures during the step of final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology. Opinion development Details
0189-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lonza Biologics Porriño, SL.
Lonza Biologics, plc. - [Application void as of 01/01/2021]
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures Commission decided Details
0321-01 Initial Chromium trioxide 215-607-8 1333-82-0 LMC S.r.l. Industrial use of Chromium Trioxide for the functional chrome plating of food slicer’s circular blades. Opinion development Details
0011-02 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Industrial use of diarsenic trioxide as processing aid in gold electroplating Commission decided Details
0011-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Formulation of diarsenic trioxide into a mixture Commission decided Details
0054-01 Initial Chromium trioxide 215-607-8 1333-82-0 Linde AMT GmbH [name of the applicant in the original application: Praxair Surface Technologies GmbH updated due to a change of corporate name] Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. Commission decided Details
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Linde AMT GmbH [name of the applicant in the original application: Praxair Surface Technologies GmbH updated due to a change of corporate name] Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided Details
0225-02 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. Commission decided Details
0225-01 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. Commission decided Details
0184-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lilly France S.A.S.; Eli Lilly Italia S.p.A. Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices Commission decided Details
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided Details
0285-01 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for functional chrome plating of actuation and landing gear systems for the aviation industry. Opinions adopted Details
0285-02 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for surface treatment of aluminium alloys for applications in the aerospace industries unrelated to functional chrome plating Opinions adopted Details
0311-01 Initial Sodium dichromate 234-190-3 10588-01-9 Liebherr-Aerospace Lindenberg GmbH Industrial use of sodium dichromate for the sealing after anodizing of aluminium alloys and passivation of metallic coatings of actuation and landing gear system parts for the aviation industry that meet the airworthiness certification requirements Opinions adopted Details
0301-01 Initial Chromium trioxide 215-607-8 1333-82-0 LIBERTY GALATI SA [application transferred from original Applicant: "Liberty Liège Dudelange (BE)” due to a notified legal entity change] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted Details
0301-02 initial Sodium dichromate 234-190-3 10588-01-9 LIBERTY GALATI SA [application transferred from original Applicant: "Liberty Liège Dudelange (BE)” due to a notified legal entity change] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted Details
0176-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LFB BIOMEDICAMENTS Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. Commission decided Details
0226-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® Commission decided Details
0288-01 Initial Chromium trioxide 215-607-8 1333-82-0 Leonardo S.p.A. Functional chrome plating of military gun barrels and outer jacket surfaces using chromium trioxide Opinions adopted Details
0212-02 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry Opinions adopted Details
0212-01 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character Opinions adopted Details
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided Details
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided Details
0223-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. Commission decided Details
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided Details
0283-01 Initial Chromium trioxide 215-607-8 1333-82-0 KYB SUSPENSIONS EUROPE, S.A.U.; KYB Manufacturing Czech s.r.o. Functional chrome plating of piston rods for shock absorbers for automotive applications Opinions adopted Details
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Commission decided Details
0294-01 Initial Chromium trioxide 215-607-8 1333-82-0 Kludi GmbH & Co. KG; Kludi-Armaturen Austria Ges.m.b.H. Functional chrome plating with decorative character of metal and plastic substrates for sanitary applications Opinions adopted Details
0294-02 Initial Chromium trioxide 215-607-8 1333-82-0 Kludi GmbH & Co. KG Pre-treatment (“etching”) of plastic substrates using chromium trioxide in electroplating processes for sanitary applications Opinions adopted Details
0132-01 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0231-01 Initial Chromium trioxide 215-607-8 1333-82-0 Kesseboehmer Beschlagsysteme GmbH&Co.KG Use of chromium trioxide for decorative/functional application in the furniture, sanitary and automotive sector. Opinions adopted Details
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided Details
0155-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Kedrion S.p.A Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand Commission decided Details
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Opinions adopted Details
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Commission decided Details
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided Details
0194-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Instrumentation Laboratory SpA Use as a lysing agent for red blood cells in blood analysis diagnostic device. Commission decided Details
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired Details
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired Details
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Commission decided Details
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. – [Decision discontinued as of 01/01/2021] Formulation of mixtures Commission decided Details
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted Details
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted Details
0185-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry Commission decided Details
0185-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules Commission decided Details
0185-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX B.V. [name of the applicant in the original application: “IDEXX EUROPE B.V.” updated due to a notified corporate name change]
IDEXX Montpellier SAS
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Commission decided Details
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX B.V. [name of the applicant in the original application: “IDEXX EUROPE B.V.” updated due to a notified corporate name change] Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Commission decided Details
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0039-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HyChem – Química Sustentável, S.A [name of applicant in the original application: "SOLVAY PORTUGAL - PRODUTOS QUIMICOS S.A. " updated due to a notified corporate name change] Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided Details
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Commission decided Details
0238-01 initial Chromium trioxide 215-607-8 1333-82-0 Hueck-Engraving GmbH & Co.KG Functional chrome plating of high-quality stainless-steel press plates for the premium wood-based materials industry Opinions adopted Details
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Commission decided Details
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited – [Decision discontinued as of 01/01/2021]
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided Details
0334-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Passivation of stainless steel using chromium trioxide or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Commission decided Details
0258-02 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of small components with simple geometries not requiring special approval procedures for their application in demanding sectors such as hydraulic systems, food, paper and chemical industry Opinions adopted Details
0258-01 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry Opinions adopted Details
0323-01 Initial Chromium trioxide 215-607-8 1333-82-0 HDO Druckguß- und Oberflächentechnik GmbH; HDO SK s.r.o. Electroplating (by a long-term contractual supplier) of metal substrates using chromium trioxide to achieve functional surfaces with decorative character. Opinion development Details
0282-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hazet Werk Hermann Zerver GmbH & Co. KG Chromium trioxide-based functional chrome plating of hand tools to achieve a high level of abrasion resistance as well as corrosion and chemical resistance Opinions adopted Details
0286-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring optimal tribological surface properties (resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0286-02 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0286-04 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0286-03 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring optimal tribological surface properties ( resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted Details
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted Details
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted Details
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted Details
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided Details
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted Details
0112-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAPOC GmbH & Co KG Use of sodium dichromate in molten bath form to modify surfaces, especially by blackening, of delicate medical products, specifically micro-surgical instruments Commission decided Details
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided Details
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided Details
0333-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Pre-treatments: Deoxidising, pickling, etching and/or desmutting using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0325-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodise sealing using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0326-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0332-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0331-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0329-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Electroplating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0330-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Inorganic finish stripping using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0337-01 Review report Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0344-01 Review report Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7); Boeing Distribution Deutschland GmbH Slurry coating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0337-02 Review report Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7); Boeing Distribution Deutschland GmbH Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0336-04 Review report Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O; Brenntag Chemicals Distribution (Ireland) Ltd Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0336-03 Review report Sodium chromate 231-889-5 7775-11-3 HAAS GROUP INTERNATIONAL SP. Z.O.O; Boeing Distribution Deutschland GmbH Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0336-02 Review report Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O; AD International BV; Brenntag Chemicals Distribution (Ireland) Ltd Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0096-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of chromium trioxide for chemical conversion and slurry coating applications by aerospace companies and their suppliers Commission decided Details
0098-01 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of potassium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided Details
0097-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of sodium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided Details
0117-01 Initial Strontium chromate 232-142-6 7789-06-2 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change];
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
Cytec Engineered Materials GmbH in its legal capacity as OR of Cytec Industries Inc. [application transferred from original Applicant: “Cytec Engineered Materials Ltd. in its legal capacity as Only Representative of Cytec Industries Inc.” due to a notified change of Only Representative]
Use of strontium chromate in primers applied by aerospace and defence companies and their associated supply chains Commission decided Details
0116-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Use of dichromium tris(chromate) for chemical conversion coating applications by aerospace and defence companies and their associated supply chains Commission decided Details
0328-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O Chromate rinsing after phosphating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0332-02 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-02 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0334-02 Initial Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Passivation of stainless steel using chromium trioxide or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-03 Initital Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0332-03 Initial Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0124-01 Initial Sodium dichromate 234-190-3 10588-01-9 H&R Ölwerke Schindler GmbH;
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems, applied for the dewaxing and deoiling process steps of petroleum raffinate. Commission decided Details
0080-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes Commission decided Details
0113-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing Commission decided Details
0222-01 Review report Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing with dark colours. Commission decided Details
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0021-01 Initial Trichloroethylene 201-167-4 79-01-6 Grupa Azoty S.A. Industrial use as a process chemical in caprolactam purification Commission decided Details
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided Details
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided Details
0241-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gessi S.p.A.
San Marco Rubinetteria S.r.l.
Use of chromium trioxide for electroplating of metal substrates with the purpose of creating a long-lasting high durability surface with bright look for kitchen and bathroom sanitaryware (functional plating with decorative character) Opinions adopted Details
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Winning Plastics – Diepersdorf GmbH [application transferred from “Bolta Werke GmbH” due to a notified legal entity change.]

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted Details
0062-01 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0063-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry. Commission decided Details
0063-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films. Commission decided Details
0063-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Formulation of mixtures of sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films; and the electrolytic passivation of tin plated steel for the packaging industry. Commission decided Details
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Opinions adopted Details
0279-01 Initial Chromium trioxide 215-607-8 1333-82-0 GalvanoPlus Srl Industrial use of chromium trioxide for functional chrome plating with decorative character of sanitary equipment Opinions adopted Details
0306-01 Initial Chromium trioxide 215-607-8 1333-82-0 GALVANICA PASOTTI THEA S.R.L.; CHINO COLOR S.r.l. Industrial use of chromium trioxide for functional chrome plating with decorative character of items for the sanitary, hydro-sanitary, taps, household industries, and various other applications (such as handles/locks, pneumatic elements and electrical connection). Opinions adopted Details
0360-03 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA; PMC Vlissingen Netherlands B.V. Industrial manufacture of PVC articles through extrusion, injection, calendering and coating using mixtures containing DOTE as stabilizer Opinion development Details
0360-02 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA; PMC Vlissingen Netherlands B.V. Formulation of PVC dry mixtures (granules and pellets) containing DOTE Opinion development Details
0360-01 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA Formulation of liquid mixtures containing DOTE Opinion development Details
0248-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - FYSOL SAS [name of applicant in the original application: OCV Chambéry France S.A.S. updated due to a notified legal entity change] Mixing by the Applicant of a NPnEO-containing epoxy resin, resulting in mixtures containing < 0.1% w/w of NPnEO for the manufacture of glass fiber articles for critical composite helicopter parts, that is exempt from authorisation under REACH Art. 56(6)(a) Commission decided Details
0320-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fratelli Creola S.r.l. Use of chromium trioxide for electroplating of metal substrates with the purpose to creating a long-lasting high durability surface with bright (shiny) or matte look for sanitary and industrial applications Opinion development Details
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD – [Decision discontinued as of 01/01/2021]
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided Details
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided Details
0290-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fir Italia S.p.A. Industrial use of chromium trioxide for the functional chrome plating with decorative character of items for the hydrosanitary sector Opinions adopted Details
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided Details
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided Details
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided Details
0289-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fabbrica d'armi Pietro Beretta SPA Chromium trioxide based functional plating of gun barrel bores and auxiliary parts for assault rifles, carbines and pistols for non-civilian uses. Opinions adopted Details
0289-02 Initial Chromium trioxide 215-607-8 1333-82-0 Fabbrica d'armi Pietro Beretta SPA Chromium trioxide based functional chrome plating of gun barrel bores and auxiliary parts for semi-automatic shotguns, over/under, side-by-side shotguns, pistols and carbines for civilian uses. Opinions adopted Details
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided Details
0224-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives. Commission decided Details
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided Details
0028-01 Initial Lead chromate 231-846-0 7758-97-6 Etienne LACROIX Industrial use of lead chromate in manufacture of pyrotechnical delay devices contained into ammunition for naval self-protection Commission decided Details
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided Details
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited – [Decision discontinued as of 01/01/2021] Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Discontinued as of 01 January 2021 Details
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided Details
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided Details
0165-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Eli Lilly Kinsale Limited Industrial use of a 4-tert-octylphenol ethoxylate compound, as a patient safety viral inactivation reagent in the manufacture of human medicines produced from biological systems Commission decided Details
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided Details
0281-01 Initial Chromium trioxide 215-607-8 1333-82-0 ELECTRO-DUROCROM.S.L Industrial use of chromium trioxide for the hard chromium plating of moulds, dies and custom-made finished parts on any metal base, in order to provide hardness, wear resistance, corrosion resistance, demoulding properties, low friction ratio, for the manufacture of high-quality metal parts in several sectors as automotive, pharmaceutical, food and packaging industries Opinions adopted Details
0315-01 Initial Chromium trioxide 215-607-8 1333-82-0 Egal srl Industrial use of chromium trioxide for the pre-treatment step (etching) in the electroplating process of small sized plastic items for various sectors Opinion development Details
0265-02 Initial Trixylyl phosphate 246-677-8 25155-23-1 EDF S.A. Industrial use as a hydraulic fluid in closed systems to drive and control main steam isolation valves Opinions adopted Details
0265-01 Initial Trixylyl phosphate 246-677-8 25155-23-1 EDF S.A. Industrial use as a hydraulic fluid in closed systems to drive and control the steam inlet valves of turbines Opinions adopted Details
0228-01 Initial Chromium trioxide 215-607-8 1333-82-0 Eaton S.R.L; Eaton Automotive Systems sp.zoo The use of Chromium Trioxide (EC 215-607-8) by Eaton Vehicle Group (Eaton) across two legal entities in the functional chrome plating of engine valves and valve actuation (“lash adjusters”) Commission decided Details
0218-01 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of hexavalent chromium trioxide for a pre-treatment step (etching) in the electroplating process for automotive applications. Opinions adopted Details
0218-02 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. Opinions adopted Details
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Dornbracht AG & Co. KG [name of applicant in the original application: Aloys F. Dornbracht GmbH & Co.KG updated due to a notified change of corporate name] Functional chrome plating with decorative character for sanitary applications Commission decided Details
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Volta Energy Solutions Hungary Kft [name of applicant in the original application: Doosan Energy Solution Kft updated due to a notified corporate name change]
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Commission decided Details
0020-01 Initial Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided Details
0243-01 Review report Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided Details
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited - [Decision discontinued as of 01/01/2021] Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Discontinued as of 01 January 2021 Details
0181-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DiaSorin Italia S.p.A [name of applicant in the original application: DiaSorin S.p.A. updated due to a notified legal entity change] Industrial use, as non-ionic surfactant, employed in the purification of antigens in in vitro diagnostics tests for infectious diseases, auto-immunity markers, bone metabolism, hepatitis and retrovirus, oncology and endocrinology. Commission decided Details
0140-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO for its detergent properties in the process of cell lysing for the production of in-vitro diagnostic reagents (Asserachrom® HPIA, Asserachrom® HPIA–IgG and Asserachrom® PF4 and STA®-Néoplastine® R15 assays). Commission decided Details
0140-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO in view of controlling the amount of non-specific reactions in the production of in-vitro diagnostic reagents (STA® - Liatest® D-Di assays). Commission decided Details
0183-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGAST Industrial use of 4-tert-OPnEO for its amphiphilic, surfactant and non-haemolytic properties, to create controlled hydrophilic spots on porous hydrophobic membranes (solid form) for in vitro diagnostic kits for blood testing via antigen/antibody reaction in the following product ranges: ABTest Card®, ABD PAD® and M-TRAP® cartridges for the ONYX® system. Commission decided Details
0004-03 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Withdrawn Details
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided Details
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided Details
0005-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Authorisation expired Details
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Commission decided Details
0012-02 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided Details
0012-06 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired Details