- ECHA
- SUCHE NACH CHEMIKALIEN
- Verabschiedete Gutachten und bisherige Konsultationen zu Zulassungsanträgen
Verabschiedete Gutachten und bisherige Konsultationen zu Zulassungsanträgen
Verabschiedete Gutachten und bisherige Konsultationen zu Zulassungsanträgen
Verabschiedete Gutachten und bisherige Konsultationen zu Zulassungsanträgen
This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.
On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid.
Related links
0094-01 | Initial | 2,2'-dichloro-4,4'-methylenedianiline (MOCA) | 202-918-9 | 101-14-4 | REACHLaw Ltd in its legal capacity as Only Representative of Suzhou Xiangyuan Special Fine Chemical Co., Ltd | Industrial use of MOCA as a curing agent/chain extender in cast polyurethane elastomer production | Withdrawn | Details |
0167-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Abbott Ireland | Professional use of system solutions (Pre-Trigger and Trigger) in the final use of the In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. | Withdrawn | Details |
0182-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Abbott Diagnostics GmbH | Professional use as a surfactant in an onboard solution (Detergent B) as an accessory to In-Vitro Diagnostic Devices (IVDs) to wash the reagent probes, the mixers and the reaction cuvettes between tests to prevent interference with the test result on ARCHITECT and Alinity automated analyser systems. | Withdrawn | Details |
0230-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Safran Landing Systems; SOCIETE DE TRAITEMENTS ELECTROLYTIQUES NORMALISES S.T.E.N. | Industrial use of 4-NPnEO as non-reactive surfactant in the sealing product in sulfuric acid anodization process of aluminium alloy parts of aircraft landing gears | Withdrawn | Details |
0122-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. |
Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Withdrawn | Details |
0122-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. |
Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrials workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Withdrawn | Details |
0002-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | ARKEMA FRANCE | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Withdrawn | Details |
0004-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Withdrawn | Details |
0004-03 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements | Withdrawn | Details |
0003-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Withdrawn | Details |
0002-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | ARKEMA FRANCE | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Withdrawn | Details |
0003-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Withdrawn | Details |
0004-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Withdrawn | Details |
0299-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | 9036-19-5 | MeiraGTx Ireland Designated Activity Company | Use of 4-tert-OPnEO as a manufacturing aid in the production of gene therapies | Opinions adopted | Details |
0164-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Swedish Orphan Biovitrum | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in manufacture of biopharmaceuticals by Swedish Orphan Biovitrum AB. | Opinions adopted | Details |
0202-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Merckle-GmbH-Ulm | The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product | Opinions adopted | Details |
0317-01 | Initial | Acids generated from chromium trioxide and their oligomers | - | - | Micron srl | Dilution of chromic acid solution at concentrations lower than 0.1% for the use in passivation baths | Opinions adopted | Details |
0123-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Opinions adopted | Details |
0123-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Opinions adopted | Details |
0278-01 | Review report | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | PMC ISOCHEM | Use as a process solvent in one step of manufacturing of an active pharmaceutical ingredient used in an anti-protozoal drug | Opinions adopted | Details |
0235-01 | Initial | Chromic acid | 231-801-5 | 7738-94-5 | Neoperl GmbH | The use of chromic acid in the functional electroplating of brass-made sanitary articles with the specific purpose of obtaining a final Cr(0) coating that provides a surface with high durability and chemical resistance. | Opinions adopted | Details |
0252-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tenneco Automotive Eastern Europe Sp. z o.o. | The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Eastern Europe Sp. z o.o. in the functional chrome plating of shock absorber rods. | Opinions adopted | Details |
0307-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | VINZIA F.lli S.p.A. | Industrial use of chromium trioxide for functional chrome plating with the decorative character of brass or stainless-steel drain components for the tap industry to provide thickness, corrosion resistance | Opinions adopted | Details |
0218-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | DOURECA - Produtos Plásticos, Lda. | Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. | Opinions adopted | Details |
0263-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Orelec | Industrial use of chromium trioxide for the hard chrome plating of injection moulds in order to provide hardness, wear resistance and good demoulding properties, critical for the manufacture of high-quality plastic parts. | Opinions adopted | Details |
0254-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | RATIER-FIGEAC | Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance | Opinions adopted | Details |
0293-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Talleres Aykrom, S.A. | Industrial use of Chromium Trioxide in functional chrome plating of metallic pieces required in different industrial sectors such as corrugated rolls to meet hardness, wear resistance, corrosion resistance, good surface condition, low friction coefficient and coating adhesion requirements | Opinions adopted | Details |
0322-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ArcelorMittal Belgium NV/SA | Industrial use of chromium trioxide for functional chrome plating of work rolls for use in the production of flat metal products | Opinions adopted | Details |
0250-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tenneco Automotive Ibérica | The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Ibérica S.A in the functional chrome plating of shock absorber rods. | Opinions adopted | Details |
0257-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | QUALIPAC Aurillac; Etablissements R.GRAINDORGE | Industrial use of chromium trioxide for the etching of polypropylene (PP) substrates, as a pre-treatment step of the electroplating process, for the luxury sector and other applications | Opinions adopted | Details |
0292-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Artech SRL | Industrial use of chromium trioxide for the functional chrome plating with decorative character of steel tubes and plates incorporated in machines for the agri-food industry, leisure, household furniture and automotive industries | Opinions adopted | Details |
0313-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | BWI Poland Technologies Sp. z. o.o | Industrial use of chromium trioxide for the functional chrome plating of shock absorber rods and strut rods, cylinders and reservoir tubes mounted on passive or semi-active dampers for automotive applications | Opinions adopted | Details |
0275-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | SICROM S.r.l. | Functional chrome plating of hydraulic cylinders and swivel joints using chromium trioxide | Opinions adopted | Details |
0095-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] | Functional chrome plating with decorative character | Opinions adopted | Details |
0262-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Cromoplastica C.M.C. S.r.l. | Use of chromium trioxide for etching of plastic substrates as a key pre-treatment step for creating an electrically conductive surface to enable electroplating | Opinions adopted | Details |
0255-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Chrom - Mueller Metallveredelung GmbH | Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. | Opinions adopted | Details |
0316-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ASO Cromsteel S.A.; FDF S.r.l. | Chromium trioxide based functional chrome plating of semi-finished steel products (bars, cylinder tubes and linear shafts) for the manufacture of hydraulic and pneumatic components | Opinions adopted | Details |
0212-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. |
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character | Opinions adopted | Details |
0253-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | GEA Westfalia Separator Group GmbH | Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges | Opinions adopted | Details |
0255-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Chrom - Mueller Metallveredelung GmbH | Industrial use of chromium trioxide in the hard chromium coating of complex outer and inner surfaces of firearms auxiliary parts requiring a customised and selective coating technique and subject to thermal, mechanical and chemical stresses, in order to provide wear resistance and barrier properties, as well as post-processing capability and resistance to hot combustion gas erosion. | Opinions adopted | Details |
0258-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH | Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry | Opinions adopted | Details |
0234-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Maschinenfabrik Kaspar Walter GmbH & Co KG | Chromium trioxide-based functional chrome plating of cylinders used in the rotogravure printing and embossing industry. | Opinions adopted | Details |
0241-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Gessi S.p.A. San Marco Rubinetteria S.r.l. |
Use of chromium trioxide for electroplating of metal substrates with the purpose of creating a long-lasting high durability surface with bright look for kitchen and bathroom sanitaryware (functional plating with decorative character) | Opinions adopted | Details |
0286-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH | Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring optimal tribological surface properties (resulting from microcracked surface) to ensure low surface friction under lubrication | Opinions adopted | Details |
0286-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH | Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring high wear resistant surfaces to withstand abrasive forces occurring in their application | Opinions adopted | Details |
0289-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Fabbrica d'armi Pietro Beretta SPA | Chromium trioxide based functional plating of gun barrel bores and auxiliary parts for assault rifles, carbines and pistols for non-civilian uses. | Opinions adopted | Details |
0294-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Kludi GmbH & Co. KG; Kludi-Armaturen Austria Ges.m.b.H. | Functional chrome plating with decorative character of metal and plastic substrates for sanitary applications | Opinions adopted | Details |
0264-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | CRISTINA SRL A SOCIO UNICO | Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. | Opinions adopted | Details |
0297-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Acciaierie d'Italia S.p.A. | Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) | Opinions adopted | Details |
0211-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] | Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) | Opinions adopted | Details |