Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:

Immediately remove contaminated clothing. If danger of loss of consciousness, place patient in

recovery position and transport accordingly. Apply artificial respiration if necessary. First aid personnel

should pay attention to their own safety.

If inhaled:

Keep patient calm, remove to fresh air, seek medical attention.

On skin contact:

Flush with copious amounts of water for at least 15 minutes. Immediate medical attention required.

On contact with eyes:

Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,

consult an eye specialist.

On ingestion:

Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical

attention.

Note to physician:

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific

antidote, administer corticosteroid dose aerosol to prevent pulmonary odema.

Fire-fighting measures

Suitable extinguishing media:

carbon dioxide, dry extinguishing media, water spray, foam

Specific hazards:

Risk of violent self-polymerization if overheated in a container.

Special protective equipment:

Wear a self-contained breathing apparatus.

Further information:

In case of a fire in the vicinity a restabilization system should be used if the temperature in the storage

container reaches 45°C. Evacuate area of all unnecessary personnel. In case of a fire in the vicinity

evacuate all personnel in a greater area if the temperature in the storage container reaches 60°C.

Accidental release measures

General information:

Release of substance/product can cause fire or explosion.

Personal precautions:

Take appropriate protective measures.

Ensure adequate ventilation. Use personal protective clothing. Breathing protection required.

Environmental precautions:

Do not discharge into drains/surface waters/groundwater. Contain contaminated water/firefighting water.

Methods and material for containment and cleaning up:

For large amounts: Pump off product. Dispose of absorbed material in accordance with regulations.

For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.

Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations.

Handling and storage

Handling:

Handle in accordance with good industrial hygiene and safety practice. The substance/ product may

be handled only by appropriately trained personnel. Facility parts must be checked for polymer

residues and cleaned on regular basis in order to avoid hazardous reactions.

Ensure thorough ventilation of stores and work areas. Encapsulation or exhaust ventilation required.

When filling, transferring, or emptying of containers, adequate local exhaust ventilation is necessary.

Vent waste air to atmosphere only through suitable separators. Check the condition of seals and

connector screw threads. Do not open warm or swollen product containers. Remove persons to safety

and alert fire brigade.

The temperatures which must be avoided are to be considered. Protect against heat. Protect from

direct sunlight. Protect contents from the effects of light.

Ensure adequate inhibitor and dissolved oxygen level.

Protection against fire and explosion:

Substance/product can form explosive mixture with air. Ground all transfer equipment properly to

prevent electrostatic discharge. Containers should be grounded against electrostatic charge. It is

recommended that all conductive parts of the machinery are grounded. Avoid all sources of ignition:

heat, sparks, open flame. Vapours may form explosive mixture with air. Ignitable mixtures can be

formed in the emptied container.

Heated containers should be cooled to prevent polymerization. If exposed to fire, keep containers cool

by spraying with water. Emergency cooling must be provided for the eventuality of a fire in the vicinity.

Sealed containers should be protected against heat as this results in pressure build-up. Avoid

influence of heat.

Storage

Further information on storage conditions: Prior to storage ensure that the transfer equipment used

and the intended storage containers do not contain other substances/products. Before transfer to

stock the identity of the product must be proved to be without doubt. The entrance to storage rooms is

to be granted only to appropriately trained personnel.

The stabilizer is only effective in the presence of oxygen. Maintain contact with atmosphere containing

5 - 21% oxygen. Never use tanks with inert-gas installation for storage.

Risk of polymerization. Protect against heat. Protect from direct sunlight. Protect contents from the

effects of light. Avoid UV-light and other radiation with high energy. Protect against contamination.

All storage containers should at least be equipped with two high temperature alert devices.

Even if the product is stored and handled as prescribed/indicated it should be used up within the

indicated duration of storage.

Storage stability:

Storage temperature: < 35 °C

Storage duration: 12 Months

The stated storage temperature should be noted.

Avoid prolonged storage.

This product should be processed as soon as possible.

Ensure adequate inhibitor and dissolved oxygen level.

The product is stabilized, the shelf life should be noted.

Do not store with less than 10 % headspace above liquid.

Storage stability is based upon ambient temperatures and conditions described.

Shelf life is limited; see product information leaflet.

Storage temperature: 45 °C

A restabilization system should be used if the temperature in the storage container reaches the

indicated value.

Storage temperature: 60 °C

All personnel in a greater area should be evacuated if the temperature in the storage container

reaches the indicated value.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment

Respiratory protection:

Suitable respiratory protection for lower concentrations or short-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)

Hand protection:

Suitable materials also with prolonged, direct contact (Recommended:  Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):

butyl rubber (butyl) - 0.7 mm coating thickness

nitrile rubber (NBR) - 0.4 mm coating thickness

Manufacturer's directions for use should be observed because of great diversity of types.

Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.

Eye protection:

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Body protection:

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

General safety and hygiene measures

Avoid contact with the skin, eyes and clothing. Avoid inhalation of vapour. Wearing of closed work clothing is required additionally to the stated personal protection equipment.

Stability and reactivity

Reactivity:

No hazardous reactions if stored and handled as prescribed/indicated.

Corrosion to metals: No corrosive effect on metal.

Formation of flammable gases: Forms no flammable gases in the presence of water.

Chemical stability:

The product is stable if stored and handled as prescribed/indicated.

Possibility of hazardous reactions:

product is heated above the flash point and/or when sprayed or atomized. Formation of explosive gas/air mixtures.

Risk of spontaneous and violent self-polymerization if inhibitor is lost or product is exposed to excessive heat. Risk of spontaneous polymerization when heated or in the presence of UV radiation. With unstabilised product, spontaneous polymerisation may occur e.g. through ambient heat. Polymerization coupled with heat formation. Polymerization produces gases which may burst closed or confined containers. Reactions may cause ignition.

Risk of spontaneous polymerization by oxygen depletion of the liquid phase.

Radical formation can cause exothermic polymerization. Reacts with peroxides and other radical components. Risk of spontaneous polymerization in the presence of starters for radical chain reactions (e.g. peroxides). Reacts with nitric acid. Polymerizes explosively in contact with strong oxidizing agents. Risk of spontaneous polymerization in the presence of oxidizing agents.

Hazardous reactions in presence of mentioned substances to avoid.

The product is stabilized against spontaneous polymerization prior to despatch. The product is stable if stored and handled as prescribed/indicated.

Conditions to avoid:

Avoid heat. Avoid oxygen content above the product of less than 5 %. Avoid UV-light and other radiation with high energy. Avoid direct sunlight. Avoid prolonged storage. Avoid inhibitor loss. Avoid excessive temperatures.

Substances to avoid:

radical formers, free radical initiators, peroxides, mercaptans, nitro-compounds, perborates, azides, ether, ketones, aldehydes, amines, nitrates, nitrites, oxidizing agents, reducing agents, strong bases, acid anhydrides, acid chlorides, concentrated mineral acids, metal salts

Inert gas

Hazardous decomposition products:

No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Waste treatment methods:

Must be sent to a suitable incineration plant, observing local regulations.

Contaminated packaging:

Uncleaned empties should be disposed of in the same manner as the contents.