Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-174-2
CAS number: 79-07-2
Remove soiled or soaked clothing immediately
If someone exposed to the product feels unwell, contact a doctor and show this safety data
Remove the casualty into fresh air and keep him calm.
Summon a doctor immediately.
No direct breathing aid should be given by the first medical helper
After contact with skin
In case of contact with skin wash off immediately with soap and water
Consult a doctor if skin irritation persists.
After contact with eyes
Rinse immediately with gently running water for 15 minutes, maintaining eyelids open. Consult
at once an ophthalmologist or a physician.
Induce vomiting in case medical help is not readily available and when the patient is concious
(Vomit should not go into the respiratoy air tract).
Suitable extinguishing media
water spray jet
Special hazards from the substance itself, its combustion products or from its vapours
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Hydrogen chloride (HCl)
Nitrogen oxides (NOx)
Special protective equipment for firefighting
Use self-contained breathing apparatus
Methods for cleaning up/taking up
Take up mechanically
Dispose of as prescribed
When picked up, treat material as prescribed under heading "Disposal".
Containers in which spilt substance has been collected must be adequately labelled
Advice on safe handling
Take precautionary measures against electrostatic loading.
Advice on protection against fire and explosion
Avoid formation of dust
Further information on storage conditions
Keep container dry
General protective measures
Do not inhale dust
Avoid contact with eyes and skin
Keep away from foodstuffs and beverages.
Wash hands before breaks and after work.
Respiratory protection : Dust mask
Hand protection : Polychloroprene gloves
Minimum thickness / gloves 0,65 mm
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.
Eye protection : safety glasses
Thermal decomposition : > 117 °C
Risk of dust explosions.
Hazardous decomposition products
Conditions to avoid
Strong alkalis and acids
HCl must be removed by flue gas scrubbing
In accordance with regulations for special waste, must be taken after pretreatment to an
authorised special waste disposal site or incineration plant
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again