Registration Dossier

Administrative data

First-aid measures

• After inhalation: Not required, but get fresh air for personal comfort.
• After skin contact: In contact with molten product immediately flush with cold water for at least 10 minutes. Do not pull solidified product off the skin. In case of burn injury immediately get medical attention.
• After eye contact: In contact with molten product immediately flush with tempered water for at least 15 minutes. In case of injury immediately get medical attention.
• After swallowing: Rinse out mouth and then drink plenty of water. In case of burn injury immediately get medical attention.

Fire-fighting measures

Suitable extinguishing agents: All types of extinguishing media are suitable. Use fire extinguishing methods suitable to surrounding conditions.
Unsuitable extinguishing agents: Water with full jet as this can form a dust cloud.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Keep away from molten/hot product if released.

Environmental precautions
Do not allow to enter sewers/surface or ground water.

Methods and material for containment and cleaning up
If molten/hot product is released, pick up mechanically when cooled.

Handling and storage

Precautions for safe handling:
Avoid contact with molten/hot product.

Conditions for safe storage, including any incompatibilities:
No specific conditions for safe storage. However store in heated receptacles.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not classified as dangerous goods.

Exposure controls / personal protection

Control parameters:
The substance is not classified as hazardous and there are no relevant control parameters.

Exposure controls:
Provide adequate ventilation when molten/hot product is handled. Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
Use face shield and gloves suitable for hot material when molten/hot product is handled.

Stability and reactivity

The substance is stable under normal pressure and temperature.
No dangerous decomposition products known.
No hazardous reactions known under intended use.

Disposal considerations

Waste of pure substance is not classified as hazardous waste.
Recommended treatment method is incineration.