Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

4.1 Description of first aid measures
General advice
:
Do not leave the victim unattended.
If inhaled
:
Move to fresh air.
Consult a physician after significant exposure.
If unconscious, place in recovery position and get medical attention immediately.
In case of eye contact
:
Remove contact lenses.
Flush eyes with water as a precaution.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed
:
Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms
:
Inhalation may provoke the following symptoms:
Shortness of breath
Asthma
4.3 Indication of any immediate medical attention and special treatment needed
No information available.

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media
:
Water mist
Water spray jet
Foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing media
:
High volume water jet
5.2 Special hazards arising from the substance or mixture
Hazardous combustion prod-ucts
:
No hazardous combustion products are known
5.3 Advice for firefighters
Special protective equipment for firefighters
:
In the event of fire, wear self-contained breathing apparatus.
Further information
:
Standard procedure for chemical fires.
Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
:
Use personal protective equipment.
Ensure adequate ventilation.
6.2 Environmental precautions
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform respective authorities.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
:
Wipe up with absorbent material (e.g. cloth, fleece).
Keep in suitable, closed containers for disposal.

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling
:
Avoid formation of aerosol.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-plication area.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion
:
Normal measures for preventive fire protection.
Hygiene measures
:
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
:
Keep container tightly closed in a dry and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards. To maintain product quality, do not store in heat or direct sunlight.
Other data
:
Keep in a dry place. No decomposition if stored and applied as directed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters
Contains no substances with occupational exposure limit values.
8.2 Exposure controls
Engineering measures
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Personal protective equipment
Eye protection
:
Safety glasses with side-shields conforming to EN166
Skin and body protection
:
Choose body protection according to the amount and concen-tration of the dangerous substance at the work place.
Respiratory protection
:
In the case of vapour formation use a respirator with an ap-proved filter.
ABEK-P3-filter

Stability and reactivity


10.1 Reactivity
Stable at normal ambient temperature and pressure.
10.2 Chemical stability
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions
Hazardous reactions
:
No decomposition if stored and applied as directed.
10.4 Conditions to avoid
Conditions to avoid
:
Take measures to prevent the build up of electrostatic charge.
10.5 Incompatible materials
Materials to avoid
:
None.
10.6 Hazardous decomposition products
No decomposition if stored normally.

Disposal considerations

13.1 Waste treatment methods
Product
:
Do not dispose of waste into sewer.
Dispose of in accordance with the European Directives on waste and hazardous waste.
In accordance with local and national regulations.
Do not contaminate ponds, waterways or ditches with chemi-cal or used container.
According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.
Send to a licensed waste management company.
Contaminated packaging
:
Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.