Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

Most important symptoms and effects, both acute and delayed
We have no description of any toxic symptoms.

Indication of any immediate medical attention and special treatment needed
No information available.

Fire-fighting measures

Suitable extinguishing media: Water, Foam, Carbon dioxide (CO2), Dry powder
Unsuitable extinguishing media: For this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture
Combustible.
Risk of dust explosion.
Development of hazardous combustion gases or vapours possible in the event of fire.

Advice for firefighters
Special protective equipment for firefighters
In the event of fire, wear self-contained breathing apparatus.

Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapours, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders: Protective equipment.

Environmental precautions
Do not flush into surface water or sanitary sewer system.

Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions. Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

Precautions for safe handling
Advice on safe handling: Observe label precautions.
Hygiene measures: Change contaminated clothing. Wash hands after working with substance.

Conditions for safe storage, including any incompatibilities
Storage conditions: Tightly closed.
Recommended storage temperature see product label.

Transport information

Land transport (ADR/RID)

UN number:
Please see Section 14 of the SDS.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Please see Section 14 of the SDS.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Please see Section 14 of the SDS.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Please see Section 14 of the SDS.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.

Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled and must meet the specifications of a standard EN/ISO/DIN. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection: Safety glasses
Hand protection:
full and splash contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Respiratory protection
required when dusts are generated.
Recommended Filter type: : Filter P 1 (acc. to DIN 3181) for solid particles of inert substances.

Environmental exposure controls
Do not flush into surface water or sanitary sewer system.

Stability and reactivity

Reactivity
Risk of dust explosion.

Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .

Possibility of hazardous reactions
Violent reactions possible with: Strong oxidizing agents

Conditions to avoid
no information available

Incompatible materials
no information available

Hazardous decomposition products
no information available

Disposal considerations

Waste treatment methods: Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.