Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 225-642-0
CAS number: 4985-85-7
General advice: Under the shower, take off immediately all contaminated clothing (including shoes).
Inhalation of mists Move patient from contaminated area to fresh air. Oxygen or artificial respiration if needed. Keep under medical
surveillance. In case of problems : Hospitalise.
Skin contact: Wash immediately, abundantly and thoroughly with water. Consult a doctor quickly. In case of extensive burns: Hospitalize immediately.
Eye contact: Wash open eyes immediately, abundantly and thoroughly for at least 15 minutes. Consult an ophthalmologist immediately.
Ingestion: Do not induce vomiting, rinse mouth and lips with plenty of water if the subject is conscious, then hospitalize.
Protection of first-aiders: If entering a saturated atmosphere, wear a self contained breathing apparatus. Protective suit.
Suitable extinguishing media: Water spray, Foam, Dry powder, Carbon dioxide (CO2)
Unsuitable extinguishing media: High volume water jet
Special hazards arising from the substance or mixture:
Thermal decomposition giving toxic products:, Ammonia, Carbon monoxide, nitrogen oxides (NOx)
Formation of toxic products through combustion:, Nitriles, Cyanides
Advice for firefighters:Specific methods:
Use water spray to cool unopened containers. Ensure containers can be rapidly moved. In case of fire nearby, remove exposed containers.
Prohibit all sources of sparks and ignition - Do not smoke. Explosion hazard
Special protective actions for fire-fighters:
In the event of fire, wear self-contained breathing apparatus. Complete suit protecting against chemicals.
Personal precautions, protective equipment and emergency procedures:
Prohibit contact with skin and eyes and inhalation of vapours. Use personal protective equipment. Ensure adequate ventilation. Evacuate
personnel to safe areas. Remove all sources of ignition. Do not smoke.
Should not be released into the environment. Prevent product from entering drains. Dam up with sand or inert earth (do not use combustible
Methods and materials for containment and cleaning up:
Recovery: Pump into a labelled inert emergency tank. Absorb the remainder with an inert absorbent material. Capture the gas with fine water spray
(scrubbing), collect and treat contaminated water.
Neutralisation: Neutralize with a sodium bisulphate solution.
Destroy absorbed product by incineration at an approved waste disposal site only In accordance with local and national regulations.
Destroy the product by incineration (in accordance with local and national regulations).
Storage and handling precautions applicable to products: Liquid. Corrosive. Dangerous for the environment Provide appropriate exhaust
ventilation at machinery. Provide showers, eye-baths. Provide water supplies near the point of use. Provide self-contained breathing
apparatus nearby. Provide waterproof electrical equipment.
Safe handling advice:
Prohibit all sources of sparks and ignition - Do not smoke. Keep well away from naked flames. Cool if diluting with water. Do not use air for
transfers. Use only explosion-proof equipment. Avoid splashing when handling. In case of insufficient ventilation, wear suitable respiratory
equipment. During transfer of the substance please handle at temperatures above 50°C to facilitate the flow.
Prohibit contact with skin and eyes and inhalation of vapours. When using do not eat, drink or smoke.
Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.
Conditions for safe storage, including any incompatibilities:
Keep in a dry, cool and well-ventilated place. Store protected from moisture and heat. Keep away from heat and sources of ignition. Do not
smoke. Do not store near combustible materials. Provide electrical earthing of equipment and electrical equipment usable in explosive
atmospheres. Provide a catch-tank in a bunded area. Provide an anti-corrosion protected electrical equipment in a bunded area.
Strong oxidizing agents, Perchlorates, Nitrates, Peroxides, Permanganates, Chlorates, Strong acids, Halogens, Water, Product likely to react
violently in alkaline environment, Nitrous acid - Nitrites - Oxygen
Recommended: Ordinary steel
To be avoided: Light metals and alloys (corrosion
Exposure Limit Values Contains no substances with occupational exposure limit values
General protective measures: Provide sufficient air exchange and/or exhaust in work rooms.
Personal protective equipment:
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Hand protection: Gloves (PVC, neoprene)
Protective gloves complying with EN 374.
Eye/face protection: Safety glasses with side-shields
Skin and body protection: Boots, Impermeable protective clothing
Reactivity & Chemical stability: The product is stable under normal handling and storage conditions.
Conditions to avoid:
Keep away from heat and sources of ignition. Store protected from moisture.
Temperatures above 50 °C
Incompatible materials to avoid:
• Reacts violently with :, Strong oxidizing agents, Perchlorates, Peroxides
• Very exothermic reaction and possibility of spitting with :, Acids (concentrated solutions), Halogens, Product likely to react violently in
• Formation of toxic products (n-nitrosamines) with:, Nitrates
Corrosion with : light metals and alloys
Hazardous decomposition products:
Thermal decomposition giving toxic and corrosive products :, Ammonia, Carbon oxides, nitrogen oxides (NOx), Formation of toxic products
through combustion:, Nitriles, Cyanides
Disposal of product: Neutralize with a sodium bisulphate solution. or Destroy the product by incineration (in accordance
with local and national regulations).
Disposal of packaging: Purging of residual gases in empty packaging is obligatory before recovery. Destroy packaging by
incineration at an approved waste disposal site. In accordance with local and national regulations. or Clean container with water. Recover waste water for processing later.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again