Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-736-9
CAS number: 2149571-40-2
Remove from exposure area to fresh air. If victim is not breathing administer artificial respiration according to your level of training and obtain professional medical assistance immediately.
Wash with soap and water and flush with water. Remove contaminated clothing and wash before reuse. Get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes while holding eyelid(s) open. Get medical attention.
DO NOT induce vomiting. Wash out mouth with water. Contact physician immediately.
-Advice to Physician:
Extinguishing Media: Carbon Dioxide, Dry Chemical or Foam. NEVER use a direct water jet.
Special Exposure Hazards:
As supplied, product presents no explosion hazard. When mixed with air and exposed to ignition source, vapors can burn in open or explode if confined.
Special Fire Fighting Precautions/Instructions:
Do not release runoff from fire control measures into waterways or sewers.
Water will not be effective in extinguishing a fire. Use water spray to cool fire-exposed containers and to reduce rate of burning, taking care not to spread the fire. Heat will build pressure and rupture closed storage containers.
Wear NIOSH approved self-contained breathing apparatus, and full protective clothing.
Chemical goggles or safety glasses. If skin contact or contamination of clothing is likely, protective clothing should be worn. Use neoprene or rubber gloves.
Prevent entry to sewers and public waters. Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams. No significant environmental hazard or adverse effect from human exposure resulting from the accidental release of this material is anticipated.
After Spillage / Leakage:
Do not empty into drains. Do not flush down sewers. Impound and recover large land spill; soak up small spill with inert solids.
Technical Protective Measures:
Assure good ventilation to prevent flammable vapor formation. If mechanical ventilation is used, electrical systems should conform to national electrical code. Provide proper grounding.
Store in dark, dry, cool, well-ventilated area. Purge air in the container with nitrogen. Store away from all heated sources, including direct sunlight. Tanks should be grounded and provided with adequate pressure relief valve. Storage in stainless steel or polyethylene recommended.
Use only well-ventilated area. Mechanical ventilation is recommended. Both local exhaust and general room ventilation are usually required. Open only in well-ventilated area away from heat, sparks or open flame.
Avoid all sources of ignition. Avoid any personal contact. Avoid vapor or mist inhalation. Storage and handling in stainless still, or lined steel, or glass, or polyethylene is recommended.
No special decontamination procedures needed. Isolate, vent, drain, wash and purge equipment before maintenance.
Engineering Control Measures:
Provide general or local exhaust ventilation systems to maintain airborne concentrations below exposure levels. Regularly inspect all electrical and mechanical equipment used with or near toluene. Ground and bond metal containers to minimize static sparks.
Personal Protective Equipment:
No special respiratory protection equipment is recommended under normal conditions of anticipated use with adequate ventilation. For emergency or non-routine operations (cleaning spills, reactor vessels, or storage tanks), wear an Self-contained breathing apparatus.
Protective gloves and clothing are recommended. Viton or nitrile rubber offers acceptable chemical resistance. Clothing should be static free.
Wear safety glasses with non-perforated sideshields for normal handling. Goggles or a full face shield may be necessary depending on quantity of material and conditions of use.
Wear rubber gloves for clean-up work on machines, extraction hoods or similar.
Wash hands before eating, drinking, smoking, or using toilet facilities.
Emergency eyewash fountains and safety showers should be available in the vicinity of any potential exposure
Conditions to Avoid:
Overheating, Heat, sparks, sunlight and open flame.
Materials to Avoid:
Air exposure causes explosive peroxide formation. Must be inhabited with BHT (2,6-Di-tert-butyl-4-methylphenol).
Avoid strong acids and oxidizers. Nitric acid, Hydrogen peroxide, Hydrazine, Hydorxylamine.
Hazardous Decomposition Products:
Not known. When overheated or in fire, decomposition products may contain oxides of carbon and peroxide.
Not expected to occur.
Disposal of liquid wastes and solids containing free liquids by land filling is prohibited in most jurisdictions. By high temperature incineration in accordance with National and International Law and Regulations.
Containers of this product may be hazardous when emptied. Empty containers may retain this product Liquid and vapors. By high temperature incineration in accordance with National and International Law and Regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Questo sito web si avvale di cookie affinché possiate usufruire della migliore esperienza sui nostri siti web.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again