Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-686-1 | CAS number: 109-60-4
Guidance on Safe Use
Administrative data
First-aid measures
If danger of loss of consciousness, place patient in recovery position and transport accordingly. Apply artificial respiration if necessary. Remove contaminated clothing. First aid personnel should pay attention to their own safety.
If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
Suitable extinguishing media:
water spray, dry powder, alcohol-resistant foam, carbon dioxide
The product is combustible. Cool endangered containers with water-spray.
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent systems.
Accidental release measures
Avoid contact with eyes. Avoid inhalation. Sources of ignition should be kept well clear.
Do not discharge into the subsoil/soil. Do not discharge into drains/surface waters/groundwater.
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr). Dispose of absorbed material in accordance with regulations.
Handling and storage
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
butyl rubber (butyl) - 0.7 mm coating thickness
Manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Avoid inhalation of vapour. Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment.
Stability and reactivity
Vapours may form explosive mixture with air.
Formation of flammable gases.
No corrosive effect on metal.
Forms no flammable gases in the presence of water.
The product is stable if stored and handled as prescribed/indicated.
Reacts with strong oxidizing agents.
Avoid all sources of ignition: heat, sparks, open flame.
Substances to avoid: strong oxidizing agents
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Disposal considerations
Must be disposed of or incinerated in accordance with local regulations.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling after being thoroughly cleaned.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
