Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 825-814-0 | CAS number: 222721-94-0
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: take the patient to well-ventilated place and call a doctor
Emergency measure - Eyes: WASHING WITH PLENTY OF WATER
Emergency measure - Skin: WASHING WITH PLENTY OF WATER AND IF IT IS POSSIBLE WITH SOAP
AND WATER.
Emergency measure - Ingestion: IF ACCIDENTALLY SWALLOWED, VOMITING SHOULD NOT BE INDUCED
SINCE THIS MAY CAUSE OBSTRUCTION OF TRACHEA; CALL A DOCTOR.
Fire-fighting measures
Recommended extinguishing agent: ALCOHOL RESISTANT FOAM, CHEMICAL POWDER, CARBONE DIOXIDE,
SAND, EARTH, WATER-FOG.
Product arising from burning: WATER AND CARBONE DIOXIDE.
Protective equipment: ANTI-SPLASH FACIAL MASK AND NEOPRENE GLOVES.
Accidental release measures
Emergency measures in case of spillage: - ON GROUND : contain spilled product with sand or earth.
Gather up product where possible and store in another
container or tank. Where this is not possible, absorb with
inert material, remove to safe place and take measures for
its destruction by incinerating.
- INTO WATER : channel the product and contain it by use of
floats, and proceed to its recovery. Where the product has
flowed into the drains or sewage system, warn the
appropriate authority.
Handling and storage
Handling: This product does not present risks of acute irritation. It
is, however, advisable to limit possible prolonged contact.
Where gases or fumes from the product are present as a result of overheating or fire, wear a gas mask with an
anti-organic gas filter.
Where oxygen levels are below 18 %, use breathing apparate.
Storage: Store away from sources of heat and ignition, in a cool and
well-ventilated place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- no dangereous good
SpecialProvisionsopen allclose all
Exposure controls / personal protection
PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter (e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Hand protection The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:
Material: butyl-rubber
Break through time: >= 480 min
Material thickness: >= 0.7 mm
gloves suitable for splash protection:
Material: Nitrile rubber/nitrile latex
Break through time: >= 30 min
Material thickness: >= 0.4 mm
Eye protection Safety glasses
Skin and body protection Protective suit
Hygiene measures General industrial hygiene practice.
Protective measures No special protective equipment required.
ENVIRONMENTAL EXPOSURE CONTROLS
General advice
Avoid subsoil penetration.
Do not flush into surface water or sanitary sewer system.
Stability and reactivity
Danger other than fire: NONE
Chemical reaction with water: NONE
Disposal considerations
Industry - Possibility of recovery/recycling: NO RECOVERY AND NOT RECYCLING
Industry - Possibility of destruction - incineration: YES
Industry - Possibility of destruction - water purification: ABSORPTION AND/OR BIODEGRADATION
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
