Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice : Remove from exposure, lie down. Take off immediately all contaminated clothing. Victim to lie down in the recovery position, cover and keep him warm. First Aid responders should pay attention to self-protection and use the recommended protective clothing
If inhaled: Move to fresh air. Call a physician immediately.
In case of skin contact: Wash off immediately with plenty of water. Cover wound with sterile dressing. Call a physician immediately.
In case of eye contact: Rinse immediately with plenty of water for at least 15 minutes. Keep eye wide open while rinsing. Call a physician immediately.
If swallowed: Rinse mouth. Drink plenty of water. Call a physician immediately.

Fire-fighting measures

Suitable extinguishing media: Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment. Water; Foam; Dry chemical; Carbon dioxide (CO2)
Specific hazards during fire-fighting: In case of fire and/or explosion do not breathe fumes. Can be released in case of fire: Carbon oxides, Nitrogen oxides (NOx), Hydrogen bromide (HBr)
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. complete suit protecting against chemicals
Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Avoid generating dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.

Accidental release measures

Personal precautions: Wear personal protective equipment. Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Knock down dust with water spray jet.
Environmental precautions: Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Wear personal protective equipment. Dust deposits should not be allowed to accumulate on surfac-es, as these may form an explosive mixture if they are re-leased into the atmosphere in sufficient concentration. Non-sparking tools should be used. Avoid dispersal of dust in the air (i.e., clearing dust surfaces with compressed air).
Clean-up methods - large spillage: Dampen, pick up mechanically and dispose of.
Clean-up methods - small spillage: Use approved industrial vacuum cleaner for removal.
Keep in suitable, closed containers for disposal.

Handling and storage

Advice on safe handling: Provide sufficient air exchange and/or exhaust in work rooms. Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces. Minimize dust generation and accumulation. Dry powders can build static electricity charges when subject-ed to the friction of transfer and mixing operations. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Breathing must be protected when large quantities are de-canted without local exhaust ventilation. Keep container closed when not in use.
Advice on protection against fire and explosion: Keep away from heat and sources of ignition. Take precau-tionary measures against static discharges. Avoid dust for-mation.
Hygiene measures: General industrial hygiene practice. Wash hands and face before breaks and immediately after handling the product. Keep working clothes separately.
Dust explosion class: Represents a severe dust explosion hazard.
Requirements for storage areas and containers: Keep tightly closed in a dry and cool place. Keep in a well-ventilated place. Protect from heat and direct sunlight. Joint-less smooth floor

Advice on common storage: Keep away from food, drink and animal feedingstuffs. Advice on Segregation

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1-(3,5-Dihydroxyphenyl)-1-oxo-2-(N-1-(4-methoxyphenyl)isopropylamino)ethane Hydrobromide)
Labels:
9
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1-(3,5-Dihydroxyphenyl)-1-oxo-2-(N-1-(4-methoxyphenyl)isopropylamino)ethane Hydrobromide)
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1-(3,5-Dihydroxyphenyl)-1-oxo-2-(N-1-(4-methoxyphenyl)isopropylamino)ethane Hydrobromide)
Labels:
Miscellaneous Dangerous Goods
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Engineering measures: It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explo-sion suppression system or an oxygen deficient environment. Ensure that dust-handling systems (such as exhaust ducts, dust collectors, vessels, and pro-cessing equipment) are designed in a manner to prevent the escape of dust into the work area (i.e., there is no leakage from the equipment). Use only appropriately classified electrical equipment and powered industrial trucks.
2. Personal protective equipment
2.1 Eye protection: Safety glasses with side-shields
2.2 Hand protection
Material: Nitrile rubber
Break through time: 480 min
Glove thickness: 0,43 mm
Directive: Protective gloves against chemicals and micro-organisms
Protective index: Class 6
2.3 Skin and body protection: Laboratory: laboratory coat; factory: disposable Overall.
2.4 Respiratory protection: Respirator with a dust filter, particle filter P3 (EN 143)
2.5 Protective measures: Handle in accordance with good industrial hygiene and safety practice. Do not breathe dust. Avoid contact with skin, eyes and clothing. Only use protective equipment in accordance with nation-al/international regulations. Follow the national regulations about wearing personal protective equipment and the warran-ty given by the manufacturer for the safe function

Stability and reactivity

1. Reactivity : No dangerous reaction known under conditions of normal use.
2. Chemical stability : No decomposition if stored and applied as directed.
3. Possibility of hazardous reactions : Dust can form an explosive mixture with air.
4. Conditions to avoid : No data available
5. Incompatible materials : No data available
6. Hazardous decomposition products: No data available

Disposal considerations

Product: Dispose of in accordance with local regulations.
Contaminated packaging: Packs that cannot be cleaned should be disposed of in the same manner as the contents. Uncontaminated packaging can be recycled.