Registration Dossier

Administrative data

First-aid measures

General advice:
Remove all contaminated clothing.

If inhaled:
Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.

In case of skin contact:
In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.

In case of eye contact:
Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed:
DO NOT induce the patient to vomit, medical advice is required.

Fire-fighting measures

Suitable extinguishing media:
Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.

Unsuitable extinguishing media:
High volume water jet


Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.

During fire-fighting respirator with independent air-supply and airtight garment is required.

Fight fire in early stages if safe to do so. Containers at risk from fire should be cooled with water and, if possible, removed from the danger area. Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.

Accidental release measures

Personal precautions:
Put on protective equipment. Ensure adequate ventilation/exhaust extraction. Keep unauthorized persons away.

Environmental precautions:
Do not flush into surface water or sanitary sewer system.

Methods for cleaning up:
Take up spilled product with dust-binding material or suitable vacuum cleaner. Avoid dust formation. Fill into labelled, sealable containers. Also place used cleaning materials into closable receptacles.

Handling and storage

Handling
Handle and open container with care. Provide sufficient air exchange and/or exhaust in work rooms. Take measures to prevent dust formation; remove any dust with air extractors where it is formed. Take precautionary measures against static discharges. Prevent formation of explosive dust-air mixtures. Contact with skin and eyes and inhalation of dust must be avoided under all circumstances.

Storage
Keep container tightly closed and dry.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection:
If product dust is present, wear an anti-dust mask with at least a P2 filter.

Persons who suffer from skin complaints or other hypersensitivity reactions of skin should not work with the product.

Hand protection:
Conditionally suitable materials for protective gloves; EN 374-3: Nitrile rubber - NBR (>= 0.35 mm)
Breakthrough time not tested; dispose of immediately after contamination. Do not use natural rubber gloves!

Eye protection:
Wear eye/face protection.

Skin and body protection:
Wear suitable protective clothing.

Hygiene measures:
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep working clothes separately. Change contaminated or soaked clothing immediately.

Stability and reactivity

Hazardous reactions:
No dangerous reaction known under conditions of normal use.

Hazardous decomposition products:
No hazardous decomposition products when stored and handled correctly.

Thermal decomposition:
No thermal decomposition when stored and handled correctly.

Disposal considerations

Dispose in accordance with applicable international, national and local laws, ordinances and statutes. For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used.

After containers have been emptied as thoroughly as possible (e.g. by pouring, scraping or draining until "drip-dry"), they can be sent to an appropriate collection point set up within the framework of the existing take-back scheme of the chemical industry. Containers must be recycled in compliance with national legislation and environmental regulations.