Registration Dossier

Physical & Chemical properties

Particle size distribution (Granulometry)

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
particle size distribution (granulometry)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
From September 05, 2017 to September 12, 2017
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
study well documented, meets generally accepted scientific principles, acceptable for assessment
Qualifier:
equivalent or similar to
Guideline:
other: ISO 2591-1
Version / remarks:
ISO 2591-1:1988, Test sieving -- Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
Deviations:
not specified
Principles of method if other than guideline:
To characterise the particle size distribution of the test substance, the analysis was conducted initially using an optical microscope analysis and was then undertaken more formally using a manual sieve analysis.
GLP compliance:
yes
Type of method:
other: Sieving and microscopic examination
Type of particle tested:
other: As received, the test substance is observed to be white pellets
Type of distribution:
mass based distribution
No.:
#1
Size:
> 2 000 µm
Distribution:
ca. 99.95 %
No.:
#2
Size:
< 2 000 µm
Distribution:
ca. 0.05 %
Remarks on result:
other: Only 0.05 % of the test susbtance was found to be < 2 mm in particle size, because most these particles were greater than the upper limit of detection for the distribution analysis, no further testing was performed.

Results 

1) Optical microscope analysis

Standard visual observation

Test substance was observed to be coarse, white pellets.

Observation using 3.2 objective lens

The particles appeared to be round edged, near spherical shapes

Observation using 40 objective lens

Most of the particles were greater than 2000 μm

2) Manual sieve analysis

Full test results

Sieve size (μm)

Sieve weight (g)

Sieve + powder weight (g)

Powder weight (g)

% by weight

> 2000

325.86

425.81

99.95

99.95

< 2000

353.64

353.69

0.05

0.05

Total

100

100.0

Only 0.05 % of the test substance was found to be < 2 mm in particle size, because most these particles were greater than the upper limit of detection for the distribution analysis, no further testing was performed.

Conclusions:
Under the study conditions, the particle size of the test substance was considered to be >2000 µm.
Executive summary:

A study was conducted to determine the particle size distribution of the test substance using an optical microscopic and manual sieve analysis. The test susbtance as received was observed to be coarse, white pellets. During sieve analysis, only 0.05% of the test substance passed through the 2000 µm sieve. Because test substance particles were greater than the upper limit of detection for the distribution analysis, the author concluded that no further testing was required. Under the study conditions, the particle size of the test substance was considered to be >2000 µm (Chilworth, 2017).

Description of key information

The particle size distribution of the test substance was determined using optical microscopic and manual sieve analysis method (Chilworth, 2017).

Additional information

Value used for CSA: >2000 µm

(for ca. 99.95% of the test substance; only 0.05%<2000 µm)