Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 252-899-6 | CAS number: 36177-92-1
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures:
Pay attention to self-protection.
Remove victims from hazardous area.
Immediately remove soiled or soaked clothing and remove it to a safe distance.
Keep victim warm, in a stabilized position and covered.
Do not leave victims unattended.
If the casualty is unconscious: Place the victim in the recovery position.
Inhalation:
Potential for exposure by inhalation if aerosols or mists are generated.
Move victims into fresh air.
With labored breathing: Provide with oxygen.
Consult a doctor.
If the casualty is not breathing: Perform mouth-to-mouth resuscitation, notify emergency physician immediately.
Skin contact:
Wash off affected area immediately with plenty of water for at least 15 minutes.
If symptoms persist, consult a physician for treatment
Eye contact:
With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.
Consult an ophthalmologist immediately if the symptoms persist.
Ingestion:
Rinse out mouth.
Immediately give large quantities of water to drink.
Obtain medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms
daze,
Headache, vertigo, somnolence (sleepiness), nausea.
May cause lung damage if swallowed.
Health injuries may be delayed.
Hazards
Harmful in contact with skin and if swallowed.Vapours may cause drowsiness and dizziness.
Indication of any immediate medical attention and special treatment needed
After accidental absorption in the body, the pathology and clinical findings are dependent on the kinetics of the noxious substance (quantity of absorbed substance, the absorption time, and the effectiveness of early elimination measures (first aid)/ excretion - metabolism).
Continue with first aid measures.
Depending on the pathology and clinical findings, patient monitoring and symptomatic treatment are necessary.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water spray, foam, CO2, dry powder.
Unsuitable extinguishing media:
Do not use full-force water jet in order to avoid dispersal and spread of the fire.
Special hazards arising from the substance or mixture
May be released in case of fire: carbon monoxide, carbon dioxide, nitric oxides, organic products of decomposition.
Advice for firefighters
Water for fire fighting must not be introduced in the sewer system, subsoil, or surface waters. Assure that there are sufficient fire water retaining facilities Contaminated fire fighting water must be disposed of in conformity with the regulations of the local authorities.
Fire residues should be disposed of in accordance with the regulations.
In case of fire, remove the endangered containers and bring to a safe place, if this can be done safely.
Pay attention to self-protection.
Keep out unprotected persons.
In case of fire: full protective suit and wear a self contained respiratory apparatus
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Keep unauthorized persons away.
Environmental precautions
Observe regulations on prevention of water pollution (check, dam up, cover up).
Do not allow entrance in sewage water, soil, stretches of water, drainage systems, surface water.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods and material for containment and cleaning up
Absorb with liquid-binding material, e. g.: chemisorption, diatomaceous earth, universal binder
Transfer into suitable containers.
Clean contaminated surface thoroughly.
Pack and label wastes like the pure substance. Do not detach label from the delivery containers prior to disposal.
Disposal according to local authority regulations.
Handling and storage
Precautions for safe handling
Use permissible in closed systems only. Handle and transfer product in closed systems only (gas displacement device).
Ensure that apparatus and pipelines are free from leaks. Do not ventilate into the open.
Suitable loading and unloading device required.
Wear personal protective equipment; see section 8.
Empty, clean and dry system / system components completely before maintenance and repair work is done.
Written approval necessary in case of non-routine jobs, e.g. maintenance activities.
Conditions for safe storage, including any incompatibilities
Advice on protection against fire and explosion
Normal measures for preventive fire protection.
Ensure there are sufficient retaining facilities for water used to extinguish fire.
Storage
Store in the original receptacle, keeping this tightly sealed, under cool and dry conditions.
Further information
Protect from sunlight, warmth and heat.
In order to ensure due transportation, make certain that stacks are of the correct height, containers are securely fastened so as not to fall off, and labelled according to the regulations.
Advice on common storage
Observe prohibition against storing together!
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 2735
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN 2735
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 2735
Shipping information
- Proper shipping name and description:
- AMINES, LIQUID, CORROSIVE, N.O.S. (N-butyl-2,2,6,6-tetramethylpiperidin-4-amine)
- Chemical name:
- N-butyl-2,2,6,6-tetramethylpiperidin-4-amine
- Labels:
- 8
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN 2735
Shipping information
- Proper shipping name and description:
- Amines, liquid, corrosive, n.o.s. (N-butyl-2,2,6,6-tetramethylpiperidin-4-amine)
- Chemical name:
- N-butyl-2,2,6,6-tetramethylpiperidin-4-amine
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls
Engineering measures
Refill and handle product only in closed system.
Leak detection recommended
Do not add wastewater to a biological wastewater treatment plant
Minimization of emissions by means of suitable technical measures such as flanges and valves with low leakage rates, recirculation of vapours.
All precautionary measures indicated have to be observed.
Exposure controls
The substance must be handled under strictly controlled conditions in accordance with Article 17/18 of the REACH regulation.
Personal protective equipment
Respiratory protection
Respirator with ABEK combination filter
Accidental release measures
wear a self contained respiratory apparatus
Note time limit for wearing respiratory protective equipment.
Hand protection
Glove material Nitrile, for example, Dermatril P 743, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness 0,2 mm
Method DIN EN 374
Accidental release measures
Glove material Nitrile/Chloroprene, for example, Nitopren 717, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness 0,65 mm
Method DIN EN 374
Eye protection
Safety glasses with side-shields conforming to EN166
Accidental release measures
close-fitting protective goggles (e.g. closed goggles)
Skin and body protection
Select materials and equipment for physical protection depending on the concentration and volume of hazardous substances and the workplace involved.
Hygiene measures
Avoid contact with skin and eyes.
Wash off immediately in the event of contact with the skin (rinsing agent: glycol polyethylene 400), rinse off afterwards with copious amounts of water.
Remove immediately all contaminated clothing.
Do not eat, drink, smoke, or sniff while at work. Wash your hands and/or face before breaks and before termination of work.
Take off clothing and shoes contaminated with product. Clean before reuse.
Protective measures
All precautionary measures indicated have to be observed.
Risk assessment and risk monitoring of all work places required.
Health, Safety and Emergency Management System recommended.
Regular safety training is a must.
Written approval necessary in case of non-routine jobs, e.g. maintenance activities.
The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).
Stability and reactivity
Possibility of hazardous reactions:
Reacts violently with acids.
Disposal considerations
Waste treatment methods
Product
Strictly controlled conditions during disposal or treatment to air, wastewater and waste.
Do not add wastewater to a biological wastewater treatment plant
Bring wastewater containing AOX for professional disposal.
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
