Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
If adverse health effects develop seek medical attention.
If inhaled: not relevant.
On skin contact: flush with copious amounts of water for at least 15 minutes. If irritation develops seek medical attention.
On contact with eyes: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
On ingestion: Rinse mouth and then drink 200-300 ml of water.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: water spray, dry powder, foam
Unsuitable extinguishing media for safety reasons: carbon dioxide
Special hazards arising from the substance or mixture
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters: Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Use personal protective clothing.
Environmental precautions: Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up:
For small amounts: Pick up with suitable absorbent material.
For large amounts: Pick up with suitable absorbent material.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.
Protection against fire and explosion: Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.
Conditions for safe storage, including any incompatibilities:
Suitable materials for containers: phenol-epoxi resin Müller 79/14/3 (CH), Polypropylene, High density polyethylene (HDPE), carbon steel (iron)
Further information on storage conditions: Keep container tightly sealed. Store protected against freezing.
Storage stability: Storage temperature: <= 50 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection: Wear respiratory protection if ventilation is inadequate.
Hand protection: Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately. Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374)
Eye protection: Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Body protection: Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures : Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work.

Stability and reactivity

Reactivity: No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability: The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions: None if used for intended purpose.
Incompatible materials: Substances to avoid: No substances known that should be avoided.
Hazardous decomposition products: No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Waste treatment methods:
Must be disposed of or incinerated in accordance with local regulations