Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Endpoint summary

Administrative data

Description of key information

Additional information

WATER SOLUBILITY

The water solubility of the test material has been determined to be 9.00 x 10^-3g/L of solution at 20.0 ± 0.5 °C.

The effect of temperature over the range 10 to 30 °C has been considered not to have had a significant influence on the solubility of the test material (range 8.18 x 10^-3to 9.00 x 10 ^-3g/L).

The initial solution pH was shown to significantly influence solubility of the test material. When using an identical initial saturation period of 72 hours, the use of the pH 4 buffer solution significantly increased the resulting equivalent test material concentration dissolved (when compared to unbuffered water) to 0.266 g/L at 20.0 ± 0.5 °C (at a final solution pH of 3.8), whereas the use of the pH 9 buffer solution increased the resulting equivalent test material concentration to 0.295 g/L at 20.0 ± 0.5 °C (at a final solution pH of 6.7). Therefore, although the maximum observed solubility was 0.295 g/L (at a final solution pH of 6.7), the water solubility of the test material may increase further in cases where additional buffering capacity exists.

 

 

Copper (II) pyrophosphate is not considered to possess any of the following hazardous physico-chemical properties: autoflammability and/or self-ignition, flammability, explosiveness and oxidising properties.