Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 252-744-2
CAS number: 35836-73-8
Supply fresh air. If symptoms are experienced, get medical attention. In case of unconsciousness place patient stably in side position for transportation.
After skin contact:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation or skin rash occurs.
After eye contact:
Immediately rinse with plenty of water. Remove contact lenses if present and easy to do. Hold eyelids apart and flush eyes with plenty of cool low-pressure water for 15 minutes. Consult an ophtalmologist.
Do not induce vomiting. If the person is conscious, rinse out mouth with water. Call for a doctor immediately.
Suitable extinguishing agents: carbon dioxide, foam, fire-extinguishing powder.
Special hazards arising from the substance or mixture: In case of fire, may release irritant and toxic fumes.
Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus.
Additional information: cool endangered receptacles with water spray.
Personal precautions and protective equipment:
Wear appropriate personal protective equipment. Keep unprotected person away.
Provide adequate ventilation.
Measures for environmental protection:
Do not allow product to reach soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).
Methods and material for containment and cleaning up:
Absorb spilled liquid with inert absorbent. Collect in an appropriate container properly labelled. Close it for disposal.
Stop spill if it can be done without danger. Dike. Pump as much liquid as possible with an explosion-proof pump or a hand pump. Absorb the remaining liquid with inert absorbent. Collect in an appropriate container properly labelled. Close it for disposal.
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly
Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at
each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
Precautions for safe handling:
Wear appropriate personal protective equipment. Provide adequate ventilation in the workplace. Protect from heat and keep ignition sources away.
Conditions for safe storage:
Store if possible under cover in a cool well-ventilated location. Keep container tightly sealed. Keep away from sources of ignition. Protect from heat and direct sunlight.
Provide local exhaust or general room ventilation to minimize exposure to vapours. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Immediately remove all soiled and contaminated clothing.
Avoid contact with eyes and skin.
Use suitable respiratory protective device in case of insufficient ventilation.
Protective gloves resistant to chemicals (standard EN 374-1).
They should be replaced regularly if there is any indication of degradation or chemical breakthrough.
Eye protection: safety glasses (standar EN 166)
Body protection: protective work clothing
Chemical stability :
Product stable under storage and handling conditions according to specifications (cf "handling and storage").
Conditions to avoid :
Keep away from heat and sources of ignition.
Materials to avoid :
Avoid contact with strong mineral acids.
Wate treatment methods:
National and regional regulations have to be adhered to.
The product has to be disposed of in an authorised incinerator, according to regulation.
Packaging has to be sent to an authorised waste treatment facility, for recycling or disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again