Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:
Immediately remove contaminated clothing.

If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.

On skin contact:
Wash thoroughly with soap and water.

On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.

On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.

Note to physician:
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire-fighting measures

Suitable extinguishing media:
water spray, dry powder, foam

Unsuitable extinguishing media for safety reasons:
water jet

Specific hazards:
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Special protective equipment:
Wear a self-contained breathing apparatus.

Further information:
The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations.

Accidental release measures

Personal precautions:
Use personal protective clothing. Breathing protection required.

Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

Methods for cleaning up or taking up:
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling
No special measures necessary provided product is used correctly.

Protection against fire and explosion:
Take precautionary measures against static discharges.

Storage
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

Protect from temperatures below: 0 °C
The packed product is destroyed at low temperatures or by frost.

Transport information

Land transport (ADR/RID)

UN number:
UN 3082
Shippingopen allclose all
Class:
9
Classification code:
9, EHSM
Packaging group:
III
Labels:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE)
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN 3082
Shippingopen allclose all
Class:
9
Classification code:
9, EHSM
Packaging group:
III
Labels:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE)
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN 3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE
Chemical name:
BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE, METHYL 1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL SEBACATE
Class:
9
Packaging group:
III
Labels:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN 3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE
Chemical name:
BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE, METHYL 1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL SEBACATE
Class:
9
Packaging group:
III
Labels:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains BIS-(1,2,2,6,6-PENTAMETHYL-4-PIPERIDYL)SEBACATE
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Suitable respiratory protection for higher concentrations or long-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)

Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
nitrile rubber (NBR) - 0.4 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.

Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment.

Stability and reactivity

Substances to avoid:
strong acids, strong bases, strong oxidizing agents

Hazardous reactions:
No hazardous reactions when stored and handled according to instructions.


Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Must be disposed of or incinerated in accordance with local regulations.


Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.