Registration Dossier

Administrative data

First-aid measures

If inhaled
- Move to fresh air.
- Keep warm and in a quiet place.
- Oxygen or artificial respiration if needed.
- Call a physician immediately.
In case of eye contact
- Keep eyelids open to allow evaporation of product.
- Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
- If eye irritation persists, consult a specialist.
In case of skin contact
- Wash off with soap and water.
- If symptoms persist, call a physician.
If swallowed
- Drink 1 or 2 glasses of water.
- Do NOT induce vomiting.
- Consult a physician.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
- Water
- powder
- Foam
- Dry chemical
- Carbon dioxide (CO2)
Unsuitable extinguishing media
- None.
Specific hazards arising from the chemical
- The product is not flammable.
- Not explosive
- The pressure in sealed containers can increase under the influence of heat.
- Explosive reaction may occur on heating or burning.
- In case of fire hazardous decomposition products may be produced such as: Gaseous hydrogen fluoride (HF), Fluorophosgene
Special protective actions for fire-fighters
- Wear self-contained breathing apparatus and protective suit.
- When intervention in close proximity wear acid resistant over suit.
- Evacuate personnel to safe areas.
- Approach from upwind.
- Protect intervention team with a water spray as they approach the fire.
- Keep containers and surroundings cool with water spray.
- Keep product and empty container away from heat and sources of ignition.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel
- Prevent further leakage or spillage if safe to do so.
Advice for emergency responders
- The product evaporates readily.
- Ensure adequate ventilation.
- Vapours are heavier than air and can cause suffocation by reducing oxygen available for breathing.
- Keep away from open flames, hot surfaces and sources of ignition.
- Refer to protective measures listed in sections 7 and 8.
Environmental precautions
- Should not be released into the environment.
Methods and materials for containment and cleaning up
- Allow to evaporate.

Handling and storage

Precautions for safe handling
- Ensure adequate ventilation.
- Use personal protective equipment.
- Keep away from heat and sources of ignition.
- To avoid thermal decomposition, do not overheat.
- Take measures to prevent the build up of electrostatic charge.
- Clean and dry piping circuits and equipment before any operations.
- Ensure all equipment is electrically grounded before beginning transfer operations.
Conditions for storage, including incompatibilities
Storage
- Keep in properly labelled containers.
- Keep in container fitted with safety valve or vent.
Vapours are heavier than air and may spread along floors.
- Keep away from heat and sources of ignition.
- Keep away from combustible material.
- Keep away from Incompatible products.
- Provide tight electrical equipment well protected against corrosion.
- Refer to protective measures listed in sections 7 and 8.
Packaging material
Suitable material
- Warning! Container under pressure.
- Stainless steel
- Carbon steel

Transport information

Land transport (ADR/RID)

UN number:
UN 1028
Shippingopen allclose all
Class:
2
Classification code:
2A
Labels:
2.2
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN 1028
Shippingopen allclose all
Class:
2
Classification code:
2A
Labels:
2.2
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Un 1028
Proper shipping name and description:
DICHLORODIFLUOROMETHANE
Chemical name:
DICHLORODIFLUOROMETHANE
Class:
2.2
EmS code:
F-C
S-V
Labels:
2.2
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN 1028
Proper shipping name and description:
DICHLORODIFLUOROMETHANE
Chemical name:
DICHLORODIFLUOROMETHANE
Class:
2.2
Labels:
2.2
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations