Registration Dossier

Administrative data

First-aid measures

- Inhalation: Remove to fresh air. If symptoms persist, call a physician.
- Skin contact: Use waterless hand cleaner. Then wash with lots of water and soap.
- Eye contact: Rinse immediately with plenty of water, also, under the eyelids, for at least 15 minutes. Consult a physician.
- Ingestion: Do not induce vomitting. Call a physician immediately

Note to physician: The acute toxicity of this product by oral, inhalation or skin exposure is considered to be low.

Fire-fighting measures

- Suitable extinguishing media: Water spray, Foam, Sand, Dry powder

- Specific hazards during firefighting: In the event of fire and/or explosion do not beathe fumes. Burning produces irritant fumes. Heating can release hazardous gases. Chlorine (Cl2). Hydrogen chloride gas. Special protective equipment for firefighters.

- Wear full protective clothing and self-contained breathing appartus. In the event of fire and/or explosion do not beathe fumes.

Accidental release measures

- Environment precautions: Prevent product from entering drains. Do not flush into water or sanitary sewer system. Avoid suboil penetration.
- Methods for cleaning up: Remove all sources of ignition. Stop leak at source. Keep people away from and upwind of spill/leak. Contain material using temporary measures such as san bags, booms or adsorbent socks. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Never return spills in original containers for re-use. Spilled product should be disposed of in accordance with all applicable government regulations. Clean-up methods - smalls spillage. Soak up with inert absorbent material. Dispose of in accordance with local regulations.

Handling and storage

- Handling: Use only in well-ventilated areas. Wear personal protective equipment. In case of insufficient ventilation, wear suitable respiratory equipment. Keep away from open flames, hot surfaces and sources of ignition.
- Storage: Requirement for storage areas and containers: Keep containers tightly closed in a cool, well-ventilated place. Store in original container. Keep away from heat and sources of ignition.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN 3129
Proper shipping name and description:
Water-reactive liquid, corrosive, N.O.S (aminochloroaluminate)
Class:
4.3
Packaging group:
I
EmS code:
F-G, S-N
Labels:
4.3 (8)
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3129
Proper shipping name and description:
Water-reactive liquid, corrosive , N.O.S., (Aminochloroaluminate)
Class:
4.3
Packaging group:
I
Labels:
4.3 (8)
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Protective measures: Avoid contact with skin, eye and clothing. Handle in accordance with good industrial hygiene and safety practice.
- Engineering measures: Ensure adequate ventilation, especially in confined areas.
- Eye protection: Tightly fitting safety gloves. Face-shield
- Hand protection: Impervious gloves
- Skin and body protection: Protective suit. Solvent-resistant apron and boots. Remove and was contaminated clothing and gloves, including the inside, before re-use.
- Respiratory protection. In case of insufficient ventilation, wear suitable respiratory equipment. Air-purifying respirator with NIOSH classification N-95 filter or P-95 (or equivalent) of oil/liquid aerosol are present (42 CFR 84).

Stability and reactivity

- Chemical stability: Hazardous polymerisation does not occur.
- Conditions to avoid: Protect from moisture
- Incompatible materials to avoid: Strong acid and oxidizing agents. Reacts violently with water. Moisture or water contact, temperature in excess of 750°F (400°C).
- Hazardous decomposition products: No decomposition if used as directed. Under conditions giving incompatible combustion, hazardous gases produced may consist of Chlorine, chlorides, hydrochloric acid fumes, nitrogen oxides.

Disposal considerations

This product does not possess any characteristics of hazardous waste (ignitability, corrosivity, reactivity or toxicity).