Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- General advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended.

- Following inhalation: Move to fresh air. If symptoms persist, call a physician. In case of shortness of breath, give oxygen. If breathed in, move person into fresh air. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

- Following skin contact: Take off contaminated clothing and shoes immediately. Wash off immediately with plenty of water. Wash contaminated clothing before re-use. If skin irritation persists, call a physician. Remove contaminated clothing. If irritation develops, get medical attention. If on skin, rinse well with water.

First aid is not normally required. However, it is recommended that exposed areas be cleaned by washing with soap and water. Wash contaminated clothing before re-use.

- Following eye contact: Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention. Remove contact lenses. Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye.

- Following ingestion: Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Consult a physician if necessary. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

- Most important symptoms and effects: No symptoms known or expected. May cause an allergic skin reaction. Causes serious eye irritation.

Fire-fighting measures

- Suitable extinguishing media: ABC powder

Carbon dioxide (CO2)

Dry chemical

Water mist

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Water spray

Foam

Carbon dioxide (CO2)

Dry chemical

- Unsuitable extinguishing media: Halons

High volume water jet

- Special hazards arising from the substance or mixture: Do not allow run-off from fire fighting to enter drains or water courses.

If product is heated above its flash point it will produce vapors sufficient to support combustion. Vapors are heavier than air and may travel along the ground and be ignited by heat, pilot lights, other flames and ignition sources at locations near the point of release.

Do not allow run-off from fire fighting to enter drains or water courses.

No hazardous combustion products are known

- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

In the event of fire, wear self-contained breathing apparatus.

Product is compatible with standard fire-fighting agents.

Keep containers and surroundings cool with water spray.

Prevent fire extinguishing water from contaminating surface water or the ground water system.

Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

- Personal precautions: Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Use personal protective equipment. Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Comply with all applicable federal, state, and local regulations. Comply with all applicable federal, state, and local regulations.

- Environmental precautions: Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

- Methods and material for containment and cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Large spills should be collected mechanically (remove by pumping) for disposal. Keep in suitable, closed containers for disposal.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Keep in suitable, closed containers for disposal.

Handling and storage

N-[3-(dimethylamino)propyl]acrylamide, EC 223-342-4/CAS 3845-76-9 (DIMAPA) is manufactured as an on-site isolated intermediate. The product is only used under "strictly controlled conditions" as defined in Title 2, Chapter 3, Article 17(3) of Regulation 1907/2006. Control such as rigourous containment by technical means during its whole lifecycle can be demonstrated. Control and procedural technologies are used to minimise emission and any resulting exposure.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

N-[3-(dimethylamino)propyl]acrylamide, EC 223-342-4/CAS 3845-76-9 (DIMAPA) is manufactured as an on-site isolated intermediate. The product is only used under "strictly controlled conditions" as defined in Title 2, Chapter 3, Article 17(3) of Regulation 1907/2006. Control such as rigourous containment by technical means during its whole lifecycle can be demonstrated. Control and procedural technologies are used to minimise emission and any resulting exposure.

Stability and reactivity

1. Reactivity: No decomposition if stored and applied as directed.

2. Chemical stability: Stable under recommended storage conditions.

3. Possibility of hazardous reactions: No hazards to be specially mentioned. Hazardous polymerisation does not occur. Product will not undergo hazardous polymerization.

4. Conditions to avoid: Exposure to sunlight. Exposure to water vapour.

5. Incompatible materials: Acids

6. Hazardous decomposition products: No hazardous decomposition products are known.

Disposal considerations

- Product: Dispose of in accordance with the European Directives on waste and hazardous waste.

Do not contaminate ponds, waterways or ditches with chemical or used container. Container hazardous when empty. Dispose of in accordance with local regulations. The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.

- Contaminated packaging: Empty remaining contents. Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers. Do not burn, or use a cutting torch on, the empty drum.

Empty remaining contents. Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.