Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 430-010-4 | CAS number: 12160-44-0
Guidance on Safe Use
Administrative data
First-aid measures
1. Description of first aid measures
First aid personnel should pay attention to their own safety. If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position). Immediately remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention. Immediately inhale corticosteroid dose aerosol.
On skin contact:
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion:
Do not induce vomiting. Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
2. Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labeling (see section 2) and/or in section 11.
3. Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
1. Extinguishing media
Suitable extinguishing media:
foam, Dry Powder for Class D, Dry sand, water spray, dry powder
Additional information:
Use extinguishing measures to suit surroundings.
2. Special hazards arising from the substance or mixture
metal oxides
The substances/groups of substances mentioned can be released if the product is involved in a fire.
3. Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Product itself is non-combustible; fire extinguishing method of surrounding areas must be considered. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Accidental release measures
1. Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Do not breathe dust. Avoid contact with the skin, eyes and clothing. Use personal protective clothing. Information regarding personal protective measures see, section 8.
2. Environmental precautions
Discharge into the environment must be avoided.
3. Methods and material for containment and cleaning up
Avoid raising dust. Dampen, pick up mechanically and dispose of. Dispose of absorbed material in accordance with regulations.
Handling and storage
1. Precautions for safe handling
Avoid dust formation. Avoid inhalation of dusts. Avoid contact with the skin, eyes and clothing. Processing machines must be fitted with local exhaust ventilation.
Protection against fire and explosion:
The product does not contribute to the spreading of flames, nor is it self combustible, not explosive.
2. Conditions for safe storage, including any incompatibilities
Suitable materials for containers: High density polyethylene (HDPE), Low density polyethylene (LDPE)
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
3. Specific end use(s)
For the relevant identified use(s) listed in Section 3.5 the advice mentioned in this section is to be observed.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
1. Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
Study technically not feasible. Corrosive effects to metal are not anticipated.
Formation of flammable gases: Remarks: Forms no flammable gases in the presence of water.
Method: Flammability (contact with water)
2. Chemical stability
The product is chemically stable.
3. Possibility of hazardous reactions
Evolution of heat under influence of acids.
The product is chemically stable.
4. Conditions to avoid
Avoid dust formation. Avoid humidity.
5. Incompatible materials
Substances to avoid:
acids
6. Hazardous decomposition products
Possible thermal decomposition products:
metallic oxides
Disposal considerations
1. Waste treatment methods
Dispose of in accordance with national, state and local regulations.
Contact specialized companies about recycling.
Contaminated packaging:
Dispose of in accordance with national, state and local regulations.
Contaminated packaging should be emptied as far as possible and disposed of in the same manner as the substance/product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
