Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information:
Immediately remove any clothing soiled by the product.
Take affected persons out into the fresh air.
- After inhalation:
In case of unconsciousness place patient stably in side position for transportation.
Provide oxygen treatment if affected person has difficulty breathing.
If not breathing, give artificial respiration, preferably mouth to mouth.
- After skin contact: After contact with skin, wash immediately almost 15 minutes with plenty of water.
- After eye contact: Rinse opened eye for almost 15 minutes under running water.
- After swallowing: Rinse mouth out with water.
Drink plenty of water and provide fresh air. Call for a doctor immediately.

Most important symptoms and effects, both acute and delayed No further relevant information available.

Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Emergency equipment: Provide wash facilities for eyes and skin near work area.

Fire-fighting measures

Extinguishing media
- Suitable extinguishing agents:
Carbon dioxide, dry chemicals, foam, water spray (mist).
Use fire extinguishing methods suitable to surrounding conditions.

Special hazards arising from the substance or mixture
High temperatures may liberate toxic or corrosive gases. Do not breathe smoke or vapours.

Advice for firefighters
- Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Wear protective clothing.

Environmental precautions: Prevent from spreading (e.g. by damming-in or oil barriers).

Methods and material for containment and cleaning up:
Large spills may be taken up with pump or vacuum and finished off with neutralization agent.
May require excavation of contaminated soil. Shovel up residues and place in a labelled sealable container for
subsequent safe disposal. Put leaking container into a labelled drum or overdrum.
Take up small spills with dry chemical absorbent.

Handling and storage

Precautions for safe handling: Handle in accordance with good industrial hygiene and safety procedures.
- Information about fire - and explosion protection: No special measures required.

Conditions for safe storage, including any incompatibilities
- Storage:
- Requirements to be met by storerooms and receptacles:
Store in dry, cool, well-ventilated area.
Mechanical ventilation is recommended.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions: Keep container tightly sealed.

Specific end use(s) No further relevant information available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not classified

Exposure controls / personal protection

Personal protective equipment:
- General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

- Respiratory protection: Suitable respiratory protective device recommended.

- Protection of hands: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

- Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.

- Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.

- Eye protection: Tightly sealed goggles.

- Body protection: Use protective suit.

Stability and reactivity

Chemical stability
- Thermal decomposition / conditions to be avoided: Stable under normal conditions of use.
- Decomposition starts at: 320 °C

Possibility of hazardous reactions No dangerous reactions known.

Conditions to avoid: No further relevant information available.

Incompatible materials:
Reacts with oxidizing agents.
Avoid contact with metals.
Reacts with strong alkali.

Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Halogenated compounds.
Hydrogen bromide

Disposal considerations

Waste treatment methods
- Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.

- Uncleaned packaging:
- Recommendation: Disposal must be made according to official regulations.