Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 815-122-7 | CAS number: 1446013-08-6
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Test not under GLP
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Qualifier:
- according to guideline
- Guideline:
- other: NF T 20-042:1985
- GLP compliance:
- no
- Test procedure:
- burning rate test over 100 mm length
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- The sample is decreed not easily flammable.
- Executive summary:
The aim of this test is to check if the substance N-[(9H-FLUOREN-9-YLMETHOXY)CARBONYL]-L-HISTIDYL-2-METHYLALANINE AND TRIFLUOROACETIC ACID (1:1); N.CAS 1446013 -08-6 is a flammable solid using the method NF T 20-042:1985.
The sample was analyzed as it is.
A mould 250 mm long with a triangular cross-section of inner height 10 mm and width 20 mm is used. On both sides of the mould, in the longitudinal direction, two metals sheets are mounted as lateral limitations which
extend 2 mm beyond the upper edge of the triangular cross-section.
The sample is homogenized and placed on the appropriate support. A hot flame (minimum 1000 °C) from a gas burner is applied to the end of the powder train. The flame must be maintained and propagated
independently. The sample is left to burn for a distance of 80 mm and measured the flame propagation time in the 100mm sequences. It is considered flammable if it is less than 45 seconds in time.
The sample is decreed not easily flammable.
Reference
Description of key information
The substance is decreed not easily flammable
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
The method used was the NF T 20-042:1985.
The sample is homogenized and placed on the appropriate support. A hot flame (minimum 1000 °C) from a
gas burner is applied to the end of the powder train. The flame must be maintained and propagated independently. The sample is left to burn for a distance of 80 mm and measured the flame propagation time in the 100mm sequences. It is considered flammable if it is less than 45 seconds in time.
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
