Registration Dossier

Administrative data

Endpoint:
boiling point
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2017-05-02 - 2017-09-15
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2017
Report Date:
2017

Materials and methods

Test guidelineopen allclose all
Qualifier:
according to
Guideline:
EU Method A.2 (Boiling Temperature)
Version / remarks:
2008
Deviations:
no
Qualifier:
according to
Guideline:
OECD Guideline 103 (Boiling point/boiling range)
Version / remarks:
1995
Deviations:
no
Qualifier:
according to
Guideline:
EPA OPPTS 830.7220 (Boiling Point / Boiling Range)
Version / remarks:
1996
Deviations:
no
GLP compliance:
yes (incl. certificate)
Type of method:
differential thermal analysis

Test material

Reference
Name:
Unnamed
Type:
Constituent
Test material form:
solid: particulate/powder
Details on test material:
Test Item: Leuco Sulfur Blue 15
Appearance: Dark, near black powder

Results and discussion

Boiling point
Key result
Decomposition:
yes
Decomp. temp.:
ca. 210 °C
Remarks on result:
other: no boiling up to decomposition

Any other information on results incl. tables

1.1                  Melting and Boiling Point (DSC)

The test item showed two endothermic effects in the temperature ranges of 80 – 160 °C and 260 – 410 °C. No further thermal effects could be observed up to the maximum test temperature of 500 °C.

Table 1:    Results of the DSC-measurements

No.

Sample weight / mg

Onset of Effect / °C

Range of effect / °C

Weight loss / mg

Atmospheric pressure / hPa

Remark

PN13332

15.41

114.19
335.41

110 – 160 (endo)
260 – 410 (endo)

5.42

1007.1

Figure 1

PN13336

16.53

112.07
308.56

80 – 160 (endo)
260 – 390 (endo)

5.97

1004.6

Figure 2

During the heating phase two endothermic effects were detected the temperature ranges of 80 – 160 °C and 260 – 410 °C, which cannot be clearly assigned to a melting or a boiling of the test item.

1.2                  Measurements by the Capillary Method

To verify the results of the DSC measurement, two additional measurements with the capillary method (Apparatus: Stuart Melting Point SMP30) were performed in the temperature range of 50 – 400 °C with a heating rate of 10 K/min. According to the observations during the tests with the capillary method, the first endothermic effect in the temperature range of 60 – 190°C in the DSC measurements with open crucibles cannot be assigned to the melting of the test item, since the test item did not change its appearance.Since the test item contains 3.23 % water, it can be assumed, that the endothermic effect is caused by the drying of the test item.No further changes of the appearance or physical state of the test item could be observed up to maximum test temperature of 400 °C. Due to the fact that a exothermic effect was observed in the DSC measurements for the determination of the thermal stability starting at a temperature of approx. 210 °C, it can be stated that the test item has no melting and boiling point up to its decomposition.

Applicant's summary and conclusion

Conclusions:
The test item Leuco Sulfur Blue 15 has no boiling point up to its decomposition starting at a temperature of approx. 210 °C as determined by differential scanning calorimetry and capillary method according to Regulation EC No. 440/2008 Method A.2., OECD Test Guideline 103 (1995) and EPA OCSPP 830.7220 (1996).
Executive summary:

Summary

The test item Leuco Sulfur Blue 15 has noboiling point up to its decomposition starting at a temperature of approx. 210 °C as determined by differential scanning calorimetry and capillary method according to Regulation EC No. 440/2008 Method A.2., OECD Test Guideline 103 (1995) and EPA OCSPP 830.7220 (1996).