Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 261-645-3 | CAS number: 59185-95-4
Guidance on Safe Use
Administrative data
First-aid measures
After inhalation: In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Do not induce vomiting; call for medical help immediately. Call for a doctor immediately.
Most important symptoms and effects, both acute and delayed: No further relevant information available.
Indication of any immediate medical attention and special treatment needed: In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Fire-fighting measures
-Suitable extinguishing agents: CO2, extinguishing powder or water spray. Use fire extinguishing methods suitable to surrounding conditions.
- For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture: Burning can produce Tin oxides, Sulphur oxides, Carbon oxides
Advice for firefighters
- Protective equipment: Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.
- Additional information: Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Accidental release measures
- Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Keep contaminated washing water and dispose of appropriately. Do not allow to penetrate the ground/soil.
- Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to Disposal considerations section.
Handling and storage
- Information about fire - and explosion protection: No special measures required.
- Conditions for safe storage, including any incompatibilities: Keep container tightly closed. Keep container dry. Keep away from food, drink and animal feedingstuffs.
- Storage
Requirements to be met by storerooms and receptacles: Store unopened packages in a cool and ventilated place
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
- Specific end use(s): No further relevant information available
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
- Ingredients with limit values that require monitoring at the workplace: Not required.
- Additional information: The lists valid during the making were used as basis.
Exposure controls
- Additional information about design of technical facilities: Ensure good ventilation/exhaustion at the workplace.
- Personal protective equipment:
General protective and hygienic measures: Wash hands before breaks and at the end of work. Do not eat or drink while working.
Respiratory protection: filter for gases and vapors
Protection of hands: Protective gloves against chemical risks according to EN 374 when handling.
Material of gloves: The glove should be chosen based on the specific conditions of use; the material, the thickness and the passage time must be selected along with the supplier.
Penetration time of glove material: The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50 % of the penetration time, is recommended.
Eye protection: Safety glasses
- Limitation and supervision of exposure into the environment: Do not allow product to reach sewage system or any water course. Do not allow to penetrate the ground/soil.
Stability and reactivity
Chemical stability: Thermal decomposition / conditions to be avoided: Stable at environment temperature.
Possibility of hazardous reactions: Reacts with acids, alkalis and oxidising agents.
Conditions to avoid Sensitive to moisture. Keep container tightly closed.
Incompatible materials: Strong antioxidant agents
Hazardous decomposition products: Tin Oxides and Sulfur Oxides
Disposal considerations
Recommendation: Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging: Recommendation: Disposal must be made according to official regulations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
