Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-733-2 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General information:
- Seek medical assistance if discomfort continues.
After inhalation:
- Remove the casualty into fresh air and keep him calm.
After contact with skin:
- In case of contact with skin, clean with soap and water.
- Consult a doctor if skin irritation persists.
After contact with eyes:
- Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.
- In case of irritation consult an occultist.
After ingestion:
- If swallowed do not induce vomiting, seek medical advice and show safety data sheet or label.
Most important symptoms and effects, both acute and delayed:
- No additional symptoms are known except those derived from the labelling.
Indication of any immeditae medical attention and special treatment needed:
- Treat symptomatically.
- Seek medical assistance if discomfort continues.
After inhalation:
- Remove the casualty into fresh air and keep him calm.
After contact with skin:
- In case of contact with skin, clean with soap and water.
- Consult a doctor if skin irritation persists.
After contact with eyes:
- Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.
- In case of irritation consult an occultist.
After ingestion:
- If swallowed do not induce vomiting, seek medical advice and show safety data sheet or label.
Most important symptoms and effects, both acute and delayed:
- No additional symptoms are known except those derived from the labelling.
Indication of any immeditae medical attention and special treatment needed:
- Treat symptomatically.
Fire-fighting measures
Suitable extinguishing media:
- water spray jet
- foam
- water jet
- carbon dioxide
- dry powder
Extinguishing media that must not be used for safety reasons:
- None
Special hazards arising from the substance of mixture:
- In case of fires, hazardous combustion gases are formed: phosphine
Special protective equipment for firefighting:
- Use self-contained breathing apparatus.
Further information:
- This product is not combustible.
- water spray jet
- foam
- water jet
- carbon dioxide
- dry powder
Extinguishing media that must not be used for safety reasons:
- None
Special hazards arising from the substance of mixture:
- In case of fires, hazardous combustion gases are formed: phosphine
Special protective equipment for firefighting:
- Use self-contained breathing apparatus.
Further information:
- This product is not combustible.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
- Do not inhale dust.
- Avoid contact with skin and eyes.
- Wear personal protective equipment. Unprotected persons must be kept away.
Environmental precautions:
- Do not allow entry to drains, water courses or soil.
Methods and material for containment and cleaning up:
- Take up mechanically.
- Dispose of absorbed material in accordance with the regulations.
- Do not inhale dust.
- Avoid contact with skin and eyes.
- Wear personal protective equipment. Unprotected persons must be kept away.
Environmental precautions:
- Do not allow entry to drains, water courses or soil.
Methods and material for containment and cleaning up:
- Take up mechanically.
- Dispose of absorbed material in accordance with the regulations.
Handling and storage
Advice on safe handling:
- Avoid dust formation.
- Provide exhaust ventilation if dust is formed.
Hygiene measures:
- Wash hands before breaks and after work.
- Use barrier skin cream.
- Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Advice on protection against fire and explosion:
- The product is not combustible.
Dust explosion class: not capable of dust explosion.
Requirements for storage areas and containers:
- Keep container tightly closed in a cool, well-ventilated place.
Advice on storage compatibility:
- Keep in a cool place away from alkalies.
Specific end use(s):
- No further recommendations.
- Avoid dust formation.
- Provide exhaust ventilation if dust is formed.
Hygiene measures:
- Wash hands before breaks and after work.
- Use barrier skin cream.
- Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Advice on protection against fire and explosion:
- The product is not combustible.
Dust explosion class: not capable of dust explosion.
Requirements for storage areas and containers:
- Keep container tightly closed in a cool, well-ventilated place.
Advice on storage compatibility:
- Keep in a cool place away from alkalies.
Specific end use(s):
- No further recommendations.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls - General protective measures:
- Avoid contact with skin.
- Avoid contact with eyes.
- Do not inhale dust.
Respiratory protection:
- Use respiratory protection if dust is raised.
- Full mask with dust filter P3.
Hand protection:
Nitrile rubber gloves.
- Minimum breakthrough time /gloves: > 120 min
- Minimum thickness / gloves 0.35 mm
Butyl rubber gloves.
- Minimum breakthrough time / gloves: > 120 min
- Minimum thickness / gloves 0.5 mm
These types of protective gloves are offered by various manufacturers . Please note the manufacturers´detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Eye protection:
- Tightly fitting safety glasses.
Body protection:
- Working clothes.
- Avoid contact with skin.
- Avoid contact with eyes.
- Do not inhale dust.
Respiratory protection:
- Use respiratory protection if dust is raised.
- Full mask with dust filter P3.
Hand protection:
Nitrile rubber gloves.
- Minimum breakthrough time /gloves: > 120 min
- Minimum thickness / gloves 0.35 mm
Butyl rubber gloves.
- Minimum breakthrough time / gloves: > 120 min
- Minimum thickness / gloves 0.5 mm
These types of protective gloves are offered by various manufacturers . Please note the manufacturers´detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Eye protection:
- Tightly fitting safety glasses.
Body protection:
- Working clothes.
Stability and reactivity
Chemical stability:
- Stable.
Possibility of hazardous reactions:
- There is no evidence that the product produces flammable gases in contact with water.
- The product has no corrosive-to-metals properties.
Conditions to avoid:
- None known.
Incompatible materials:
- Not known.
Hazardous decomposition products:
- The product does not contain any chemical groups which suggest self-reactive properties, nor is the estimated SADT less than 75 °C, nor is the exothermic decomposition energy higher than 300 J/g. No decomposition if used as intended.
- Stable.
Possibility of hazardous reactions:
- There is no evidence that the product produces flammable gases in contact with water.
- The product has no corrosive-to-metals properties.
Conditions to avoid:
- None known.
Incompatible materials:
- Not known.
Hazardous decomposition products:
- The product does not contain any chemical groups which suggest self-reactive properties, nor is the estimated SADT less than 75 °C, nor is the exothermic decomposition energy higher than 300 J/g. No decomposition if used as intended.
Disposal considerations
Waste treatment methods:
- Product: Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent authorities.
- Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.
- Product: Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent authorities.
- Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
