Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
General information
Remove/Take off immediately all contaminated clothing.

After inhalation
Move the victim to fresh air.
Get medical attention if symptoms occur.

After contact with skin
In case of contact, immediately flush skin with soap and plenty of water.

After contact with eyes
In the case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.

After ingestion
Rinse mouth with water.
Call in a physician immediately and show him the Safety Data Sheet.

Most important symptoms and effects, both acute and delayed
Symptoms
The possible symptoms known are those derived from the labelling (see section classification and labelling).
Hazards
The possible risks known are those derived from the labelling (see section classification and labelling).

Indication of any immediate medical attention and special treatment needed
Treatment
Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Water spray jet
Foam

Special hazards arising from the substance or mixture
In case of fire hazardous decomposition products may be produced such as:
Carbon oxides
Nitrogen oxides (NOx)
Sulphur oxides

Advice for firefighters
Special protective equipment for firefighting
Self-contained breathing apparatus

Further information
Cool container and metallic parts with a water spray jet

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protective equipment. Unprotected persons must be kept away.

Environmental precautions
The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up
Take up mechanically
Dispose of absorbed material in accordance with the regulations.
Avoid dust formation.

Reference to other sections
Additional information
Information regarding Safe handling, see chapter handling and storage.
For personal protection see section exposure controls/personal protection.
Information regarding Waste Disposal, see chapter disposal considerations.

Handling and storage

Precautions for safe handling
Advice on safe handling
Avoid dust formation.
Avoid dust accumulation in enclosed space.
Provide adequate ventilation.
Handle substance within a closed system.
With Local Exhaust Ventilation

Hygiene measures
Remove/Take off immediately all contaminated clothing.
Wash hands before breaks and at the end of workday.
Advice on protection against fire and explosion
Take measures to prevent the build up of electrostatic charge.
Keep away sources of ignition.

Conditions for safe storage, including any incompatibilities
Further information on storage conditions
Keep containers tightly closed in a cool, well-ventilated place.

Specific end use(s)
No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Control parameters
Exposure limit values
Exposure limit values are not available.
DNEL/DMEL values
DNEL/DMEL values are not available.
PNEC values
PNEC values are not available.

Exposure controls
Appropriate engineering controls
Provide adequate ventilation.

General protective measures
Do not breathe dust.
Avoid contact with skin and eyes.

Respiratory protection : In case of dust formation, use a fine dust face mask.

Hand protection : Chemical resistant gloves
Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

Eye protection : safety glasses/face shield

Body protection : working clothes

Stability and reactivity

Reactivity
See section "Possibility of hazardous reactions"

Chemical stability
Stable

Possibility of hazardous reactions
Risk of dust explosion.

Conditions to avoid
Heat.
Avoid dust formation.

Incompatible materials
Strong oxidizing agents

Hazardous decomposition products
No decomposition if stored and applied as directed.
Hazardous decomposition products:
Carbon monoxide
Carbon dioxide (CO2)
Nitrogen oxides (NOx)
Sulphur oxides

Disposal considerations

Waste treatment methods
Product
In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging
Dispose of in accordance with local regulations.
Composition
C; H; N; O

Categories Display