Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-473-3 | CAS number: 107-21-1
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: kidney damage
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, alcohol-resistant foam, carbon dioxide
Special hazards arising from the substance or mixture
Advice: See SDS section 7 - Handling and storage.
Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Contaminated extinguishing water must be disposed of in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Handle in accordance with good industrial hygiene and safety practice.
Environmental precautions
Do not empty into drains.
Methods and material for containment and cleaning up
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr). Dispose of absorbed material in accordance with regulations.
Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.
Handling and storage
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.
Protection against fire and explosion:
Electrical devices must meet the specified temperature class.
Temperature class: T2 (Autoignition temperature >300 °C).
Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place. Protect from air. Protect from atmospheric humidity. Protect contents from the effects of light.
Storage stability:
Storage temperature: < 40 °C
The stated storage temperature should be noted.
Storage duration: 12 Months
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment.
Stability and reactivity
Reactivity
Corrosion to metals: | No corrosive effect on metal. | |
Formation of flammable gases: | Remarks: | Forms no flammable gases in the presence of water. |
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions when stored and handled according to instructions.
Conditions to avoid
> 40 °C
Avoid humidity. Avoid daylight. Disregard of the conditions mentioned may result in undesirable decomposition reactions.
Incompatible materials
Substances to avoid:
strong oxidizing agents
Hazardous decomposition products
Possible decomposition products:
carbonyl compounds, Dioxolan derivatives
Disposal considerations
Waste treatment methods
Must be disposed of or incinerated in accordance with local regulations.
Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
