Registration Dossier

Administrative data

First-aid measures

Eyes- Rinse opened eye for several minutes under running water. Consult a doctor if required.
Inhalation-Remove to fresh air. Seek medical attention if required.
Skin-Immediately wash with soap and water and rinse thoroughly. Seek medical attention if required.
General advice-After first aid, get appropriate medical attention. In general, metal powders or dust may cause mechanical eye and skin irritation. Inhalation of powder or dust may cause mild respiratory tract irritation.

Fire-fighting measures

Substance is non-flammable. Extinguishing methods depend upon hazards in vicinity. Use water or dry extinguishing powders, sand, CO2 or other inert material as extinguishing media. Do not use water if any water-reactive metal powders are nearby.No hazardous decomposition products are known. Firefighters-Use a self-contained breathing apparatus and a protective suit.

Accidental release measures

Use personal protective equipment (i.e. gloves, safety goggles, dust respirator) as specified in Exposure Controls below.
Avoid release into the environment.
Use clean-up methods which avoid dust generation, such as vacuuming (with filter that prevents re-suspension of dust) or wet clean-up, and fill into appropriate sealable containers. Clean remaining spills with water. Dispose of wastes according to regulations.

Handling and storage

Ensure adequate ventilation and, if necessary, exhaust ventilation when handling or transferring this material. Use good housekeeping procedures to prevent accumulation of dust and ensure that accepted limit values are complied with. Wear personal protective equipment when handling.
Store in tightly closed containers in a well ventilated area. Store under dry and cool conditions, and away from incompatible materials (oxidising agents and acids).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls may include local ventilation systems with dust filters depending on degree of process automation and containment
Eye protection-Use of safety glasses as appropriate and reasonably necessary, depending on degree of process automation and containment.
Skin protection- Use of work gloves and work clothes as appropriate and reasonably necessary, depending on degree of process automation and containment.
Respiratory protection-Use of respiratory protection as appropriate and reasonably necessary, depending on degree of process automation and containment.

Stability and reactivity

No hazardous reactions known.
Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Avoid formation and accumulation of dust.
No possibility of hazarous reactions, incompatible materials or decomposition products known.

Disposal considerations

Waste Management Controls:
Dispose in accordance with local/regional/national/international regulations. Two options are recommended:
1. Re-use
2. Recycling or other recovery

Wastewater should be processed through a sewage treatment plant (STP) either on-site or off-site.