Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures


If adverse health effects develop seek medical attention.


 


If inhaled:


not relevant.


 


On skin contact:


After contact with skin, wash immediately with plenty of water.


 


On contact with eyes:


In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.


 


On ingestion:


Rinse mouth and then drink 200-300 ml of water.


 


Most important symptoms and effects, both acute and delayed


Symptoms: No significant symptoms are expected due to the non-classification of the product.


Hazards: No Hazard is expected under intended use and appropriate handling. 


 


Indication of any immediate medical attention and special treatment needed


Treatment: Treat symptomatically, no known specific antidot.

Fire-fighting measures

Extinguishing media


Suitable extinguishing media:


water spray, dry powder, foam


 


Unsuitable extinguishing media for safety reasons:


carbon dioxide


 


Special hazards arising from the substance or mixture


endangering substances: harmful vapours


Advice: Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.


 


Advice for fire-fighters


Special protective equipment:


Wear a self-contained breathing apparatus.


 


Further information:


Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.


 

Accidental release measures

Personal precautions, protective equipment and emergency procedures


Use personal protective clothing.


 


Environmental precautions


Do not discharge into drains/surface waters/groundwater.


 


Methods and material for containment and cleaning up


For small amounts: Pick up with suitable appliance and dispose of.


For large amounts: Pick up with suitable appliance and dispose of.


Avoid raising dust. Dispose of absorbed material in accordance with regulations.

Handling and storage

Precautions for safe handling


Handle in accordance with good industrial hygiene and safety practice.


 


Protection against fire and explosion:


Avoud dust formation. Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.


 


Conditions for safe storage, including any incompatibilities


 


Suitable materials for containers: polyethylene (PE), Phenol lacquer, High density polyethylene (HDPE)


Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.


Please refer to the product specific data sheet for further information.


 


Storage stability:


Storage temperature: <= 30 °C 


protect against moisture. 


 

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not classified as a dangerous good under transport regulations ADR, RID, AD IMDG, IATA/ICAO

Exposure controls / personal protection

appropriate engineering controls: 


If dust formation caused by handling cannot be avoided Staubex equipment for plants may be necessary. 


Exposure controls


Personal protective equipment


Respiratory protection:


Not needed.


 


Hand protection:


Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately.


Suitable materials also with prolonged, direct contact (Recommended:  Protective index 6, corresponding > 480 minutes of permeation time according to EN 374-1):


nitrile rubber (NBR) - 0.2 mm coating thickness


 


Eye protection:


Safety glasses with side-shields (frame goggles) (e.g. EN 166)


 


Body protection


Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case
of dust)


General safety and hygiene measures


Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work


 


Environmental exposure controls
Do not discharge product into the environment without control.

Stability and reactivity

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated.

Chemical stability

The product is stable if stored and handled as prescribed/indicated.

Possibility of hazardous reactions

No hazardous reactions when stored and handled according to instructions.

Conditions to avoid

See MSDS section 7 - Handling and storage.

Incompatible materials

Substances to avoid:

No substances known that should be avoided.

Hazardous decomposition products

Hazardous decomposition products:

No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Must be disposed of or incinerated in accordance with local regulations.


Contaminated packaging:


Uncontaminated packaging can be re-used.Packs that cannot be cleaned should be disposed of in the same manner as the contents.