Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
(Q)SAR
Adequacy of study:
supporting study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
Justification for type of information:
See attached QMRF/QPRF
Principles of method if other than guideline:
The result was obtained using an appropriate QSAR method (see attached QMRF and QPRF for details).

The model is an adaptation of the existing SRC model MPBPVPWIN v 1.43, which is a component of the EPI Suite. This existing model uses the normal boiling point as input. Whilst this method is good in principle, the model was developed using a wide range of organic chemicals and only a few organosilicon compounds. Therefore, a validation procedure was undertaken to assess the applicability of the model to organosilicon compounds. It was noted that the MPBPVPWIN model gave a systematic error; therefore, the current model was developed to correct this. The current model is a linear regression based QSAR, with the vapour pressure prediction from MPBPVPWIN as the descriptor. The adapted model applies to organosilicon substances.
Test no.:
#1
Temp.:
25 °C
Vapour pressure:
0.007 Pa
Conclusions:
A vapour pressure value of 6.9E-03 Pa at 25°C has been determined for the hydrolysis product of the registered substance using an appropriate estimation method, the result is considered reliable.

Description of key information

Key value for chemical safety assessment

Vapour pressure:
0.007 Pa
at the temperature of:
25 °C

Additional information

Vapour pressure of the silanol hydrolysis product