Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 617-116-8
CAS number: 80573-04-2
Since the analysis was conducted under high vacuum conditions, the heat
could be transferred only by radiation, this caused a consistent
difference between the furnace temperature and the sample one and a
considerable time for the system to reach equilibrium.
The temperatures reported (registered by the thermocouple under the
Knudsen cell) are hence different from the one set and the mass loss has
been measured only in a 80 minutes time interval within each isotherm,
after the system had reached equilibrium.
The first seven isotherms were discharged since the mass loss was too
low to be accurate.
Table 1: Vapour pressure
Extrapolation at 20°C
The vapour pressure of the test item, Balsalazide acid was determined
according to OECD Guideline 104 and EC Method A.4 and was estimated to
be 3.80E-05 Pa at 20°C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Ce site web utilise des cookies afin de vous garantir la meilleure expérience possible sur nos sites web.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again