Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information
Remove clothing where dust collected.
Ensure that the First Aid Personnel are aware of the product involved, and take precautions to protect themselves (e.g. wear personal protection equipment).

After inhalation
When inhaled remove to fresh air and seek medical aid.

After contact with skin
In case of contact with skin wash off immediately with plenty of water
If skin problems persist, seek medical advice.

After contact with eyes
Rinse immediately with gently running water for 15 minutes, maintaining eyelids open. Consult at once an ophthalmologist or a physician.

After ingestion
Do not induce vomiting. Keep patient at rest and obtain immediate medical assistance
If the victim is conscious, rinse the mouth immediately after ingestion, give nothing to drink.

Fire-fighting measures

Suitable extinguishing media
water spray jet
foam

Extinguishing media that must not be used for safety reasons
Full water jet

Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed:
Carbon monoxide (CO)
Carbon dioxide (CO2)

Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus
Wear full protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Protection through wearing of tightly closed chemical protection suit and a self-contained breathing apparatus.
Keep away sources of ignition.

Environmental precautions
Contain contaminated water/firefighting water
Do not allow entry to drains,water courses or soil

Methods and material for containment and cleaning up
Pick up mechanically. Rinse away rest with water.
Avoid dust formation and electrical charging (sparking) because dust explosion might occur.
When picked up, treat material as prescribed under heading "Disposal".

Handling and storage

Precautions for safe handling

Advice on safe handling
Use only in well ventilated areas.
Open and handle container with care.
Avoid all contact with product
Keep container tightly closed.
Keep limited supplies at workplace.
Avoid dust formation.

Hygiene measures
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Do not eat, drink or smoke during work time.

Advice on protection against fire and explosion
Dust can form an explosive mixture with air.
Keep away from sources of ignition
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Observe the general rules of industrial fire protection



Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers
Keep in original packaging, tightly closed

Advice on storage compatibility
Do not store together with incompatible agents.
Do not store or transport together with foodstuffs

Further information on storage conditions
Keep container tightly closed in a cool, well-ventilated place, open and handle carefully.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not dangerous goods
Shippingopen allclose all
Labels:
Not dangerous goods
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not dangerous goods
Shippingopen allclose all
Labels:
Not dangerous goods
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not dangerous goods
Shipping information
Proper shipping name and description:
Not dangerous goods
Labels:
Not dangerous goods
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not dangerous goods
Shipping information
Proper shipping name and description:
Not dangerous goods
Labels:
Not dangerous goods
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures
Observe the usual precautions for handling chemicals.
Safety shower and eyewash must be in work area.
Avoid contact with eyes and skin
Do not inhale dust

Respiratory protection :
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Multi-range filter ABEK/P3

Hand protection :
For long-term exposure:
Butyl rubber gloves.
For short-term exposure (splash protection):
Nitrile rubber gloves.
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection :
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Body protection :
Protective overalls

Stability and reactivity

Chemical stability
Under normal conditions the product is stable

Possibility of hazardous reactions
When handled and stored appropriately no dangerous reactions are known
Organic products which are intentionally or unintentionally in powdered form have, in principle, the possibility of creating a dust explosion hazard.

Conditions to avoid
Keep away from heat, sparks, open flames, and other sources of ignition.

Incompatible materials
not known

Hazardous decomposition products
Carbon monoxide and carbon dioxide

Disposal considerations

Product
Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste