Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General advice: Remove/Take off immediately all contaminated clothing. Get medical advice/ attention if you feel unwell.

If inhaled: If inhaled, remove to fresh air. Get medical advice/ attention.

In case of skin contact: In case of contact, immediately flush skin with soap and plenty of water.

In case of eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Consult a physician.

If swallowed: If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Most important symptoms and effects, both acute and delayed

Symptoms: irritant effects

Risks: Causes serious eye irritation.

Indication of any immediate medical attention and special treatment needed

Treatment: Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:

Water spray jet

Alcohol-resistant foam

Dry powder

Carbon dioxide (CO2)

Unsuitable extinguishing media:

High volume water jet

Special hazards arising from the substance or mixture

Specific hazards during firefighting:

In case of fires, hazardous combustion gases are formed:

Carbon monoxide (CO)

Carbon dioxide (CO2)

Nitrogen oxides (NOx)

Advice for firefighters

Special protective equipment for firefighters: Self-contained breathing apparatus

Further information: Wear suitable protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions:

Wear suitable protective equipment.

Ensure adequate ventilation.

Environmental precautions:

The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up

Methods for cleaning up:

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Treat recovered material as described in the section "Disposal considerations".

Handling and storage

Precautions for safe handling

Advice on safe handling: When used and handled appropriately no special measures are needed

Advice on protection against fire and explosion: Observe the general rules of industrial fire protection

Hygiene measures: Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions: Keep containers tightly closed in a cool, well-ventilated place. Handle and open container with care.

Specific end use(s): No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International Bulk Chemicals Code): No transport as bulk according IBC - Code.

Exposure controls / personal protection

Exposure controls

Personal protective equipment

Eye protection: Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Hand protection

Break through time: 480 min

Glove thickness: 0,7 mm

Remarks: Long-term exposure Impervious butyl rubber gloves

Break through time: 30 min

Glove thickness: 0,4 mm

Remarks: For short-term exposure (splash protection): Nitrile rubber gloves.

Remarks: These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Skin and body protection: Wear suitable protective equipment.

Respiratory protection: Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure

Protective measures: Observe the usual precautions for handling chemicals.

Avoid contact with skin and eyes.

Stability and reactivity

Chemical stability

Stable under normal conditions.

Possibility of hazardous reactions

Hazardous reactions: The substance or mixture does not emit flammable gases in contact with water.

Conditions to avoid: None known.

Incompatible materials

Materials to avoid: not known

Hazardous decomposition products: When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product: Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Contaminated packaging: Packaging that cannot be cleaned should be disposed of as product waste