Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Inhalation Remove to fresh air. If symptoms persist, call a physician.

Skin contact Wash with soap and water. Consult a physician if necessary.

Eye contact Rinse thoroughly with plenty of water, also under the eyelids. If eye irritation persists: Get medical advice/attention.

Ingestion Not an expected route of exposure. Clean mouth with water and drink afterwards plenty of water. Consult a physician if necessary.

Symptoms When in doubt or if symptoms are observed, seek medical advice.

Note to physicians Treat symptomatically

Fire-fighting measures

5.1. Extinguishing media

Suitable extinguishing media

Dry chemical, CO2, alcohol-resistant foam or water spray. Use extinguishing measures that are appropriate to local circumstances

and the surrounding environment.

Unsuitable extinguishing media

No information available

5.2. Special hazards arising from the substance or mixture

May form explosive mixtures with air

Hazardous combustion productsCarbon oxides. Oxide fumes of non-toxic metals.

5.3.Advice for firefighters

Wear self-contained breathing apparatus and protective suit. Use personal protective equipment as required.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions

Avoid creating dust.

For emergency responders

Use personal protection recommended in Section 8.

6.2. Environmental precautions

Do not flush into surface water or sanitary sewer system.

6.3. Methods and material for containment and cleaning up

Methods for containment Prevent dust cloud.

Methods for cleaning up Sweep up and shovel into suitable containers for disposal.

Handling and storage

7.1. Precautions for safe handling

Advice on safe handling

WARNING! MAY FORM COMBUSTIBLE DUST CONCENTRATIONS IN AIR DURING PROCESSING. Avoid creating dust. Dust

should not be allowed to accumulate on surfaces, as an explosive mixture may form if the dust is released into the atmosphere in

sufficient concentrations. Do not breathe dust. In case of insufficient ventilation, wear suitable respiratory equipment.

General Hygiene Considerations

Handle in accordance with good industrial hygiene and safety practice.

7.2. Conditions for safe storage, including any incompatibilities

Storage Conditions

Keep container tightly closed in a dry and well-ventilated place.

Incompatible materials

Strong oxidizing agents. Strong acids.

7.3. Specific end use(s)

Risk Management Methods (RMM)

The information required is contained in this Material Safety Data Sheet.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls Showers

Eyewash stations

Ventilation systems.

Personal protective equipment

Eye/face protection Wear safety glasses with side shields (or goggles).

Skin and body protection Suitable protective clothing.

Respiratory protection None under normal use conditions. In case of inadequate ventilation wear respiratory

protection.

Environmental exposure controls Do not allow into any sewer, on the ground or into any body of water.

Stability and reactivity

Stable under normal conditions.

Explosion data

Sensitivity to Mechanical Impact None.

Sensitivity to Static Discharge Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition

source is a potential dust explosion hazard.

10.3. Possibility of hazardous reactions

Possibility of Hazardous Reactions

Hazardous polymerization does not occur.

10.4. Conditions to avoid

Dust formation.

10.5. Incompatible materials

Strong oxidizing agents. Strong acids.

10.6. Hazardous decomposition products

Thermal decomposition can lead to release of irritating and toxic gases and vapors.

Disposal considerations

Waste from residues/unused products

Disposal should be in accordance with applicable regional, national and local laws and regulations.

Contaminated packaging Dispose of in accordance with federal, state and local regulations.

Categories Display