Registration Dossier

Administrative data

First-aid measures

• Description of first aid measures
• General information:
Immediately remove any clothing soiled by the product.
• After inhalation:
Supply fresh air and to be sure call for a doctor.
• After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
• After eye contact:
Rinse opened eye for several minutes under running water.
Call a doctor immediately.
• After swallowing:
Do not induce vomiting; call for medical help immediately.
Rinse mouth carefully.
• Most important symptoms and effects, both acute and delayed
No further relevant information available.

Fire-fighting measures

• Extinguishing media
• Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Use fire extinguishing methods suitable to surrounding conditions.
• For safety reasons unsuitable extinguishing agents:
Water with full jet
• Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide (CO)
• Advice for firefighters
• Protective equipment:
Wear self-contained respiratory protective device.

Accidental release measures

• Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Use respiratory protective device against the effects of fumes/dust/ aerosol.
Avoid contact with the eyes and skin.
• Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Prevent from spreading (e.g. by damming-in or oil barriers).
• Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.

Handling and storage

• Handling:
• Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Avoid contact with the eyes and skin.
Information about fire - and explosion protection:
No special measures required.
• Conditions for safe storage, including any incompatibilities
• Storage:
• Requirements to be met by storerooms and receptacles:
Prevent any seepage into the ground.
Store only in the original receptacle.
• Information about storage in one common storage facility:
Store in cool, dry place in tightly closed receptacles.
Do not store together with alkalis (caustic solutions).
• Further information about storage conditions:
Keep container tightly sealed.
• Specific end use(s)
No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
UN3265
Proper shipping name and description:
3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (DIISOTRIDECYL HYDROGEN PHOSPHATE)
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Class:
8 (C3) Corrosive substances.
Packaging group:
III
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (DIISOTRIDECYL HYDROGEN PHOSPHATE)
Class:
8 Corrosive substances.
Packaging group:
III
EmS code:
F-A,S-B
Labels:
8
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (DIISOTRIDECYL HYDROGEN PHOSPHATE)
Class:
8 Corrosive substances.
Packaging group:
III
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

• Additional information about design of technical facilities:
No further data; see item 7.
• Control parameters
• Ingredients with limit values where monitoring at the workplace is recommended :
CAS No. Designation of material
7664-38-2 phosphoric acid
OEL
Short-term value 2 mg/m3
WEL
Short-term value 2 mg/m3
Long-term value 1 mg/m3
• Additional information:
The lists valid during the making were used as basis.
• Exposure controls
• Personal protective equipment:
• General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
Safety shower at proximity.
Eye wash station at proximity.
• Respiratory protection: Use suitable respiratory protective device only when aerosol or mist is formed. Use suitable respiratory protective device in case of insufficient ventilation.
• Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. PVC gloves
• Eye protection: Tightly sealed goggles Face protection
• Body protection: Impervious protective clothing Boots

Stability and reactivity

• Reactivity
• Chemical stability
• Thermal decomposition / conditions to be avoided:
To avoid thermal decomposition do not overheat.
Dangerous reactions
Reacts with light alloys in the presence of moisture to form hydrogen.
Corrosive action on metals.
• Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Phosphorous oxides

Disposal considerations

• Waste treatment methods
• Recommendation
Must be specially treated adhering to official regulations.
Contact manufacturer for recycling information.
Do not empty into drains and avoid release to the environment. This product must be disposed in a certificated hazardous or special waste collection point.
• Uncleaned packaging:
• Recommendation:
Disposal must be made according to official regulations.