Registration Dossier

Administrative data

First-aid measures

DESCRIPTION OF FIRST AID MEASURES
- Inhalation
If inhaled, move to fresh air. If not breathing, give artificial respiration and/or oxygen. Get medical attention if symptoms persist.
- Skin contact
Remove contaminated clothing. Wash with plenty of soap and water. Get medical attention if symptoms (irritation) develop and persist.
- Eye contact
Rinse eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Remove contact lenses if worn and easy to do, continue rinsing. Get medical attention.
- Ingestion
If swallowed, wash out mouth with water. Get immediate medical attention.

MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
To the best of our knowledge the toxicity of this substance has not been fully investigated, thus symptoms and effects are not fully known. Toxic if swallowed and by eye contact. High doses causes damages to organs (lungs, liver, intestines) with sympotms such as hypoactivity, tremors and prostration. Potential as a skin sensitizer. Other adverse effects cannot be excluded.

INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
Treat sympotmatically and supportively.

Fire-fighting measures

EXTINGUISHING MEDIA
- Suitable extinguishing media
Use water spray, foam, dry powder or carbon dioxide as appropriate for surrounding fire and materials.
- Unsuitable extinguishing media
No limitations given for this substance

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Combustible, but not flammable. In case of fire toxic fumes of carbon monoxide (CO), nitrogen oxides (NOx) and hydrogen chloride (HCl) may be emitted. High concentrations of finely divided airborne organic particles can potentially explode if ignited.

ADVICE FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Prevent fire-extinguishing water from contaminating the watercourses.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
If product is released or spilled, take proper precautions to minimize exposure by using appropriate personal protective equipment (see section Exposure controls / Personal protection). Avoid raising dust.

ENVIRONMENTAL PRECAUTIONS
Collect spillage and place in specific bins and send for destruction. Avoid release to drains.

METHODS AND MATERAIL FOR CONTAINMENT AN DCLEANING UP
Moisten the spillages with water prior to sweeping up. Keep in closed suitable container and hold for waste disposal. Ventilate and wash spill site with water after completed pick up.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING
Avoid dust generation and inhalation of dust. Avoid contact with eyes and skin. Ensure good ventilation. Use recommended personal protective equipment.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Store at regular indoor conditions, generally 15 to 25 C, and keep the container tightly closed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2811
Shipping information
Proper shipping name and description:
Toxic solid, organic, N.O.S.
Chemical name:
(S)-5-methoxy-2-aminotetralin HCl
Labels:
6.1
Special provisions / remarks
Special provisions:
Tunnel code: E
Remarks:
Environmental hazards: None

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2811
Shipping information
Proper shipping name and description:
Toxic solid, organic, N.O.S.
Chemical name:
(S)-5-methoxy-2-aminotetralin HCl
Labels:
6.1
Special provisions / remarks
Remarks:
Environmental hazards: None
Tunnel code: E

Marine transport (UN RTDG/IMDG)

UN number:
2811
Shipping information
Proper shipping name and description:
Toxic solid, organic, N.O.S.
Chemical name:
(S)-5-Methoxy-2-aminotetralin HCl
Labels:
6.1
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2811
Shipping information
Proper shipping name and description:
Toxic solid, organic, N.O.S.
Chemical name:
(S)-5-Methoxy-2-aminotetralin HCl
Labels:
6.1
Special provisions / remarks
Remarks:
Environmental hazards: None
Special precautions: 670/677
SpecialProvisionsopen allclose all

Exposure controls / personal protection

CONTROL PARAMETERS
To the best of our knowledge, established occupational exposure limit value is not available.

EXPOSURE CONTROL
- Appropriate engineering controls
Use appropriate controls (e.g. containment, local exhaust ventilation) as specified in a workplace risk assessment. Technical measures and appropriate operations should be given priority over the use of personal protective equipment. Handle in accordance with good industrial hygiene and safety practice.

- Personal protective equipment
Eye face protection - Wear safety glasses with side shields. An emergency eyewash device should be available.
Skin protection - Handle wiht gloves. The selected gloves must comply with the specifications in EC Directive 89/686/EEC and the related standard EN374 or applicable federal, state and national legislation.
Protective clothing- Use protective clothing to prevent skin contact. The type should be selected according to concentrations, quantities and duration of handling at the specific workplace. In dust generating operation wear disposable coverall.
Respiratory protection - Required when dust is generated. Choice of respiratory protection should be appropriate to the task and the level of existing engineering controls. Use air-purifying respirator with combination filter for routine powder handling in process scale and positive-pressure air-supplied respirator if there is a potential of uncontrolled release. In laboratories, use fume hood or laminar flow both.
Environmental exposure controls -Do no empty into drains.

Stability and reactivity

REACTIVITY
No known reactivity hazards under normal conditions.

CHEMICAL STABILITY
The substance is chemically stable at regular indoor temperature conditions, generally 15 to 25 C.

POSSIBILITY OF HAZARDOUS REACTIONS AND CONDTIONS TO AVOID
None known.

INCOMPATIBLE MATERIALS
Strong oxidants.

HAZARDOUS DECOMPOSITION PRODUCTS
Carbon monoxide (CO), nitrogen oxides (NOx) and hydrogen chloride (HCl) may be formed.

Disposal considerations

WASTE TREATMENT METHODS
Dispose waste at authorized plant, in accordance with Directive 2008/98/EC and/or applicable federal, state, national or local legislation.