Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

After inhalation: fresh air. Consult doctor if feeling unwell.

After skin contact: wash off with plenty of water. Remove contaminated clothing.

After eye contact: rinse out with plenty of water.

After swallowing: immediately make victim drink water (two glasses at most). Consult a


Fire-fighting measures

Suitable extinguishing media

Water, Foam, Carbon dioxide (CO2), Dry powder

Unsuitable extinguishing media

For this substance/mixture no limitations of extinguishing agents are given.

Combustible material

Development of hazardous combustion gases or vapours possible in the event of fire.

Special protective equipment for firefighters

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by

keeping a safe distance or by wearing suitable protective clothing.

Further information

Prevent fire extinguishing water from contaminating surface water or the ground water system.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Accidental release measures

Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance

contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency

procedures, consult an expert.

Do not let product enter drains.

Cover drains. Collect, bind, and pump off spills. Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of

properly. Clean up affected area.

Handling and storage

Change contaminated clothing. Preventive skin protection recommended. Wash hands after

working with substance.

Tightly closed. Dry.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical measures and appropriate working operations should be given priority over the use of

personal protective equipment.

Protective clothing needs to be selected specifically for the workplace, depending on

concentrations and quantities of the hazardous substances handled. The chemical resistance of

the protective equipment should be enquired at the respective supplier.

Eye/face protection

Safety glasses

Hand protection

full contact:

Glove material: Nitrile rubber

Glove thickness: 0,11 mm

Break through time: > 480 min

splash contact:

Glove material: Nitrile rubber

Glove thickness: 0,11 mm

Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive

89/686/EEC and the related standard EN374.

Other protective equipment

protective clothing

Respiratory protection

required when vapours/aerosols are generated.

Stability and reactivity

The product is chemically stable under standard ambient conditions (room temperature) .

Violent reactions possible with:

Strong oxidizing agents

Disposal considerations

Please consider national regulations related to waste disposal.