Registration Dossier

Administrative data

First-aid measures

Description of first aid measures

General advice:
Get medical advice/attention if you feel unwell.
Remove/Take off immediately all contaminated clothing.

If inhaled: If inhaled, remove to fresh air. Get medical advice/ attention.
In case of skin contact: In case of contact, immediately flush skin with soap and plenty of water.
In case of eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed: If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Most important symptoms and effects, both acute and delayed
Symptoms: No symptoms known currently.
Risks: No hazards known at this time.

Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Water spray jet
Alcohol-resistant foam
Unsuitable extinguishing media:
Dry powder
Carbon dioxide (CO2)

Special hazards arising from the substance or mixture
Specific hazards during firefighting:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), Carbon dioxide (CO2)

Advice for firefighters
Special protective equipment for firefighters:
Self-contained breathing apparatus
Further information:
Wear suitable protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear suitable protective equipment.
Ensure adequate ventilation.


Environmental precautions:
The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up
Methods for cleaning up:
Pick up mechanically. Rinse away rest with water.
Avoid dust formation.
Take measures to prevent the build up of electrostatic charge.
Risk of dust explosion.
Treat recovered material as described in the section "Disposal considerations".

Handling and storage

Precautions for safe handling
Advice on safe handling:
Handle and open container with care.
Avoid dust formation.
Avoid dust accumulation in enclosed space.
Provide adequate ventilation.

Advice on protection against fire and explosion:
Keep away sources of ignition. Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations. Dust can form an explosive mixture in air.

Hygiene measures:
Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.

Conditions for safe storage, including any incompatibilities
Further information on storage conditions:
frost-sensitive - if the product becomes turbid as a result of exposure to low temperatures, warm it slowly to approx. 50°C and stir it. Before using the product, ensure that is is completely homogeneous.

Specific end use(s):
No further recommendations.

Transport information

Land transport (ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not restricted
Remarksopen allclose all

Additional transport information

Additional transport information
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International Bulk Chemicals Code):
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Exposure controls
Personal protective equipment
Eye protection:
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Hand protection
Remarks:
- Long-term exposure Impervious butyl rubber gloves Minimum thickness (glove): not determined The data about break through time/strength of material is not valid for undissolved solids/dust.
- For short-term exposure (splash protection): Nitrile rubber gloves. Minimum thickness (glove): not determined The data about break through time/strength of material is not valid for undissolved solids/dust.
- These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Respiratory protection:
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure

Protective measures:
Observe the usual precautions for handling chemicals.
Do not breathe dust.

Stability and reactivity

Reactivity
See section "Possibility of hazardous reactions"

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
Hazardous reactions:
Reactions with acids.

Conditions to avoid:
None known.

Incompatible materials
Materials to avoid:
not known

Hazardous decomposition products
No decomposition if stored and applied as directed.

Disposal considerations

Disposal considerations
Waste treatment methods
Product:
In accordance with local authority regulations, take to special waste incineration plant
Contaminated packaging:
Packaging that cannot be cleaned should be disposed off as product waste