Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information:

As in all cases of potential poisoning, Obtain medical advice immediately.

In case of eye contact:

Irrigate copiously with water for at least 10 minutes. Obtain medical advice if any irritation or evidence of tissue

damage persists.

In case of inhalation:

Remove the individual to fresh air and keep at rest. Obtain medical advice immediately.

In case of skin contact:

Remove contaminated clothes. Wash skin with large volumes of water.

If irritation persists, or any sign of tissue damage is apparent, obtain medical advice immediately.

In case of ingestion:

Rinse mouth with water. Obtain medical advice immediately.

Most important symptoms and effects, both acute and delayed

No specific data available.

Indication of immediate medical attention and special treatment needed

No specific data available.

Fire-fighting measures

Extinguishing media

In the event of fire, adequate extinguishers should be used. Avoid inhalation of smoke and fumes. In case of

insufficient ventilation, wear suitable respiratory equipment.

Special hazard arising from the substance or mixture: No specific hazard known.

Advice for fire-fighters: No specific advice.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

For non-emergency personnel:

Adequate protective gloves should be worn when handling spillages. No smoking. Avoid naked flames or other

potential sources of ignition (eg. electrical equipment).

Avoid skin contamination and inhalation of vapour.

Individual washing routines should be followed after any potential contact.

Ensure adequate ventilation in working areas following accidental releases.

For emergency personnel:

Apply the same recommendations as above

Environmental precautions

Do not discharge directly into drains, air, into soil or into the aquatic environment.

Methods and material for containment and cleaning up

For containment:

Any absorbent used for cleaning up spillage should be disposed promptly,accordingly to local regulation.

Gross spillages should be contained by any means, and disposal of this should be in accordance with

Government Regulations.

For cleaning-up:

Spillages should be disposed of in accordance with Governmental Regulations.

Handling and storage

Precautions for safe handling

Avoid contact with skin and eyes.

Wear adequate protective gloves protection and eye/face protection.

No smoking. Avoid any sources of ignition.

Avoid exposing to high temperature during processing.

Do not ingest or apply to the skin as such. Good personal washing routines should be followed.

Maintain adequate local and general ventilation where product is handled.

Protective measures

Keep strict control of dust accumulation to a minimum.Maintain adequate local and general ventilation where

product is handled.Avoid any sources of ignition.

Advice on general occupational hygiene

Good personal washing routines should be followed.

Conditions for safe storage, including any incompatibilities

It is good general practice to store in closed, preferably full, containers away from heat sources, and protected

from extremes of temperature. Do not re-use the empty container

Respect generals rules for compatibility storage.

Specific end use(s): Not available at this time.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Labels:
----
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Labels:
----
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shipping information
Proper shipping name and description:
N/A
Chemical name:
----
Labels:
----
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shipping information
Proper shipping name and description:
N/A
Chemical name:
----
Labels:
----
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters: /

Exposure controls

Avoid exposing to high temperature during processing.

Maintain adequate local and general ventilation where product is handled.

Appropriate engineering controls

Maintain adequate local and general ventilation where product is handled and dispensed.

Environmental exposure controls

Not available at this time. Minimize release to the environment.

Personal protection

Respiratory protection: Where ventilation (LEV) is inadequate to prevent any inhalation of substances, use

adequate respiratory apparatus.

Hand protection: Use chemical resistant gloves classified under Standard EN 374: Protective gloves against

chemicals. Preferred glove barrier materials: Neoprene and Nitrile. When prolonged or frequently repeated

contact may occur, a glove with a protection class of 4 or higher (breakthrough time greater than 120 minutes

according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of

1 or higher (breakthrough time greater than 10 minutes according to EN 374) is recommended. Thickness > or

= 0,2mm.

NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace

should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which

may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body

reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.

Eye protection: Adequate safety glasses should be used.

Skin protection: Wear protective clothing, overall if necessary to limit the odour contamination of personal

clothing. Individual washing routines should be followed after any potential contact.

Stability and reactivity

Reactivity

No reaction known with water.

Chemical stability

Good stability at standard temperature.

Possibility of hazardous reactions

Not known.

Conditions to avoid

Avoid temperatures above or at least 5 °C below flash point for any flammable liquids.

Do not heat closed containers.

Avoid contact with oxidizing agents.

Incompatible materials

Not known.

Hazardous decomposition products

Contact with water or storage under recommended conditions for one year should not produce dangerous

decomposition products

Disposal considerations

Waste treatment methods

Product: when being disposed of in its unused and uncontaminated state should be treated as a hazardous

waste according to EC Directive 2008/98/EC. Any disposal practices must be in compliance with all national

and provincial laws and any municipal or local by-laws governing hazardous waste.

Contaminated packaging: for used, contaminated and residual materials additional evaluations may be

required.

Do not dump into any sewers, on the ground, or into any body of water.