Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 283-907-6 | CAS number: 84775-78-0 Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Ascophyllum nodosum, Fucaceae.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://www.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_physical-and-chemical-properties.png)
Solubility in organic solvents / fat solubility
Administrative data
- Endpoint:
- solubility in organic solvents / fat solubility
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 18-Oct-2010 to 22-Oct-2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: This study has been performed according to OJEC and CIPAC guidelines and according to GLP principles.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 010
- Report date:
- 2010
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- other: CIPAC MT 181
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: OJEC A.6
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Ascophyllum nodosum, ext.
- EC Number:
- 283-907-6
- EC Name:
- Ascophyllum nodosum, ext.
- Cas Number:
- 84775-78-0
- Molecular formula:
- Not applicable; a generic molecular formula cannot be provided for this UVCB substance.
- IUPAC Name:
- Ascophillum nodosum, extract
- Details on test material:
- Test item identification : Algea Fert Solid K+
Empirical formula : not available
Structural formula : not available
Molecular weight : Not available
Batch number : 00680
ChemService number : 2901493-001
Manufacturing date : March 09, 2010
Expiry date : March 09, 2012
Constituent 1
Results and discussion
Solubility in organic solvents / fat solubilityopen allclose all
- Medium:
- methanol
- Solubility:
- 250.6 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Medium:
- other: dichloromethane
- Solubility:
- 9.9 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Medium:
- other: n-hexane
- Solubility:
- < 1 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Medium:
- other: p-xilene
- Solubility:
- 1.4 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Medium:
- acetone
- Solubility:
- 7 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Medium:
- ethyl acetate
- Solubility:
- 9 mg/L
- Temp.:
- 22 °C
- Remarks on result:
- other: with analytical determination with OJEC A.6 method
- Test substance stable:
- yes
Any other information on results incl. tables
Method CIPAC MT 181
No solubility data were found in literature.
Since in the preliminary test, a test item solubility in every solvent tested lower than 10 g/L was estimated, an analytical determination was performed using the shake flask method described in OJEC Method A.6, with the aim to obtain a more accurate value.
Shake flask method (OJEC A.6)
The results of the solvent solubility test are reported in Tables from 4 to 11.
The quality criteria of the Method A.6 were verified (RSD% over three values is < 15%).
Representative spectra are presented in Figures from 1 to 6.
TABLE 1 Linear calibration for Methanol
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 275 nm |
0.0122 |
0.1014 |
0.8653 |
2nd series 275 nm |
0.0135 |
0.1017 |
0.8478 |
Mean |
0.0129 |
0.1016 |
0.8565 |
Delta |
0.0013 |
0.0004 |
0.0175 |
Delta % |
10.00% |
0.35% |
2.05% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0080 |
0.0104 |
0.99991 |
TABLE 2 Results obtained for Methanol solubility
ChemService code |
As – Ab 275 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
0.0000 |
- |
- |
- |
- |
- |
2901493-001 MeOH A1 |
0.5158 |
62.80 |
4.00 |
1.00 |
251.18 |
251.07 |
2901493-001 MeOH A2 |
0.5153 |
62.74 |
4.00 |
1.00 |
250.95 |
|
2901493-001 MeOH B1 |
0.5150 |
62.69 |
4.00 |
1.00 |
250.76 |
250.60 |
2901493-001 MeOH B2 |
0.5143 |
62.61 |
4.00 |
1.00 |
250.43 |
|
2901493-001 MeOH C1 |
0.5135 |
62.51 |
4.00 |
1.00 |
250.05 |
250.02 |
2901493-001 MeOH C2 |
0.5134 |
62.50 |
4.00 |
1.00 |
249.99 |
|
Mean value : |
250.6 |
|||||
Standard deviation (S.D.) : |
0.49 |
|||||
Relative Standard Deviation (RSD%): |
0.19% |
(1) Quantification with the linear calibration curve.
TABLE 3 Linear calibration for Dichloromethane
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 275 nm |
0.0217 |
0.0981 |
0.8635 |
2nd series 275 nm |
0.0211 |
0.0980 |
0.8654 |
Mean |
0.0214 |
0.0981 |
0.8644 |
Delta |
0.0007 |
0.0001 |
0.0019 |
Delta % |
3.22% |
0.10% |
0.22% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0081 |
0.0129 |
1.00000 |
TABLE 4 Results obtained for Dichloromethane solubility
ChemService code |
As – Ab 275 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
-0.0001 |
- |
- |
- |
- |
- |
2901493-001 DCM A1 |
0.0952 |
10.17 |
1.00 |
1.00 |
10.17 |
10.29 |
2901493-001 DCM A2 |
0.0972 |
10.41 |
1.00 |
1.00 |
10.41 |
|
2901493-001 DCM B1 |
0.0921 |
9.79 |
1.00 |
1.00 |
9.79 |
9.69 |
2901493-001 DCM B2 |
0.0906 |
9.60 |
1.00 |
1.00 |
9.60 |
|
2901493-001 DCM C1 |
0.0875 |
9.22 |
1.00 |
1.00 |
9.22 |
9.58 |
2901493-001 DCM C2 |
0.0934 |
9.95 |
1.00 |
1.00 |
9.95 |
|
Mean value : |
9.9 |
|||||
Standard deviation (S.D.) : |
0.42 |
|||||
Relative Standard Deviation (RSD%): |
4.29% |
(1) Quantification with the linear calibration curve.
TABLE 5 Linear calibration for n-Hexane
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 275 nm |
0.0256 |
0.0980 |
0.8654 |
2nd series 275 nm |
0.0217 |
0.1039 |
0.8584 |
Mean |
0.0237 |
0.1009 |
0.8619 |
Delta |
0.0038 |
0.0058 |
0.0070 |
Delta % |
16.21% |
5.79% |
0.81% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0080 |
0.0157 |
1.00000 |
TABLE 6 Results obtained for n-Hexane solubility
ChemService code |
As – Ab 275 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
0.0004 |
- |
- |
- |
- |
- |
2901493-001 n-Hexane A1 |
0.0068 |
0.30 |
1.00 |
1.00 |
0.30 |
0.26 |
2901493-001 n-Hexane A2 |
0.0047 |
0.21 |
1.00 |
1.00 |
0.21 |
|
2901493-001 n-Hexane B1 |
0.0036 |
0.16 |
1.00 |
1.00 |
0.16 |
0.15 |
2901493-001 n-Hexane B2 |
0.0033 |
0.15 |
1.00 |
1.00 |
0.15 |
|
2901493-001 n-Hexane C1 |
0.0024 |
0.11 |
1.00 |
1.00 |
0.11 |
0.10 |
2901493-001 n-Hexane C2 |
0.0022 |
0.10 |
1.00 |
1.00 |
0.10 |
|
Mean value : |
0.2 |
|||||
Standard deviation (S.D.) : |
- |
|||||
Relative Standard Deviation (RSD%): |
- |
(1) Quantification with the lowest standard calibration curve (WSS 1).
TABLE 7 Linear calibration for p-Xylene
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 300 nm |
0.0149 |
0.0839 |
0.6927 |
2nd series 300 nm |
0.0171 |
0.0833 |
0.6972 |
Mean |
0.0160 |
0.0836 |
0.6949 |
Delta |
0.0021 |
0.0006 |
0.0046 |
Delta % |
13.29% |
0.67% |
0.66% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0065 |
0.0121 |
0.99997 |
TABLE 8 Results obtained for p-Xylene solubility
ChemService code |
As – Ab 300 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
-0.0003 |
- |
- |
- |
- |
- |
2901493-001 p-Xylene A1 |
0.0226 |
1.49 |
1.00 |
1.00 |
1.49 |
1.46 |
2901493-001 p-Xylene A2 |
0.0219 |
1.44 |
1.00 |
1.00 |
1.44 |
|
2901493-001 p-Xylene B1 |
0.0219 |
1.44 |
1.00 |
1.00 |
1.44 |
1.42 |
2901493-001 p-Xylene B2 |
0.0214 |
1.41 |
1.00 |
1.00 |
1.41 |
|
2901493-001 p-Xylene C1 |
0.0218 |
1.43 |
1.00 |
1.00 |
1.43 |
1.44 |
2901493-001 p-Xylene C2 |
0.0219 |
1.44 |
1.00 |
1.00 |
1.44 |
|
Mean value : |
1.4 |
|||||
Standard deviation (S.D.) : |
0.03 |
|||||
Relative Standard Deviation (RSD%): |
1.78% |
(1) Quantification with the lowest standard calibration curve (WSS 1).
TABLE 9 Linear calibration for Acetone
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 330 nm |
0.0134 |
0.0594 |
0.5180 |
2nd series 330 nm |
0.0125 |
0.0611 |
0.5153 |
Mean |
0.0129 |
0.0603 |
0.5167 |
Delta |
0.0009 |
0.0017 |
0.0027 |
Delta % |
7.02% |
2.82% |
0.53% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0048 |
0.0086 |
1.00000 |
TABLE 10 Results obtained for Acetone solubility
ChemService code |
As – Ab 330 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
0.0011 |
- |
- |
- |
- |
- |
2901493-001 Acetone A1 |
0.0432 |
7.16 |
1.00 |
1.00 |
7.16 |
7.21 |
2901493-001 Acetone A2 |
0.0436 |
7.25 |
1.00 |
1.00 |
7.25 |
|
2901493-001 Acetone B1 |
0.0428 |
7.09 |
1.00 |
1.00 |
7.09 |
7.02 |
2901493-001 Acetone B2 |
0.0422 |
6.96 |
1.00 |
1.00 |
6.96 |
|
2901493-001 Acetone C1 |
0.0411 |
6.73 |
1.00 |
1.00 |
6.73 |
6.70 |
2901493-001 Acetone C2 |
0.0409 |
6.68 |
1.00 |
1.00 |
6.68 |
|
Mean value : |
7.0 |
|||||
Standard deviation (S.D.) : |
0.23 |
|||||
Relative Standard Deviation (RSD%): |
3.36% |
(1) Quantification with the linear calibration curve.
TABLE 11 Linear calibration for Ethyl Acetate
Algea Fert Solid K+ |
WSS 1 1.05mg/mL (peak area) |
WSS 2 10.52mg/mL (peak area) |
WSS 3 105.20mg/mL (peak area) |
1st series 275 nm |
0.0175 |
0.1009 |
0.8602 |
2nd series 275 nm |
0.0176 |
0.0907 |
0.8587 |
Mean |
0.0175 |
0.0958 |
0.8595 |
Delta |
0.0001 |
0.0102 |
0.0016 |
Delta % |
0.35% |
10.67% |
0.18% |
y = mx + q |
Parameterm (slope) |
Parameterq (intercept) |
ParameterR (correlation) |
0.0081 |
0.0099 |
1.00000 |
TABLE 12 Results obtained for Ethyl Acetate solubility
ChemService code |
As – Ab 275 nm |
Cs (1) (mg/mL) |
Ve x Ds (mL) |
Vs (mL) |
Solubility (mg/mL) |
Solubility Mean (mg/L) |
Control |
0.0002 |
- |
- |
- |
- |
- |
2901493-001 AcOEt A1 |
0.0884 |
9.72 |
1.00 |
1.00 |
9.72 |
9.63 |
2901493-001 AcOEt A2 |
0.0870 |
9.55 |
1.00 |
1.00 |
9.55 |
|
2901493-001 AcOEt B1 |
0.0853 |
9.34 |
1.00 |
1.00 |
9.34 |
9.26 |
2901493-001 AcOEt B2 |
0.0841 |
9.18 |
1.00 |
1.00 |
9.18 |
|
2901493-001 AcOEt C1 |
0.0813 |
8.84 |
1.00 |
1.00 |
8.84 |
8.07 |
2901493-001 AcOEt C2 |
0.0689 |
7.30 |
1.00 |
1.00 |
7.30 |
|
Mean value : |
9.0 |
|||||
Standard deviation (S.D.) : |
0.88 |
|||||
Relative Standard Deviation (RSD%): |
9.78% |
Applicant's summary and conclusion
- Conclusions:
- From the experimental data obtained according to CIPAC method MT 181 and to guideline A.6 in Official Journal L 383 Part A, it can be concluded that the solubility of the analyzed Algea Fert Solid K+ sample in six organic solvents at room temperature is the following:
Solubility in Methanol : 250.6 mg/L
Solubility in Dichloromethane : 9.9 mg/L
Solubility in n-Hexane : <1 mg/L
Solubility in p-Xylene : 1.4 mg/L
Solubility in Acetone : 7.0 mg/L
Solubility in Ethyl Acetate : 9.0 mg/L
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)